[PATCH 03/13] drm/i915: Add separate define for SEL_FETCH_CUR_CTL()

[Jani Nikula]

On Thu, 16 May 2024, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Split the cursor stuff from the rest of the selective fetch
> plane registers so that we can collect all cursor registers
> in intel_cursor_regs.h. Also take the opportunity to rename
> the registers to match the spec.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cursor.c      | 6 +++---
>  drivers/gpu/drm/i915/display/intel_cursor_regs.h | 5 +++++
>  2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c
> index c780ce146131..b44809899502 100644
> --- a/drivers/gpu/drm/i915/display/intel_cursor.c
> +++ b/drivers/gpu/drm/i915/display/intel_cursor.c
> @@ -508,7 +508,7 @@ static void i9xx_cursor_disable_sel_fetch_arm(struct intel_plane *plane,
>  	if (!crtc_state->enable_psr2_sel_fetch)
>  		return;
>  
> -	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), 0);
> +	intel_de_write_fw(dev_priv, SEL_FETCH_CUR_CTL(pipe), 0);
>  }
>  
>  static void wa_16021440873(struct intel_plane *plane,
> @@ -523,7 +523,7 @@ static void wa_16021440873(struct intel_plane *plane,
>  	ctl &= ~MCURSOR_MODE_MASK;
>  	ctl |= MCURSOR_MODE_64_2B;
>  
> -	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), ctl);
> +	intel_de_write_fw(dev_priv, SEL_FETCH_CUR_CTL(pipe), ctl);
>  
>  	intel_de_write(dev_priv, PIPE_SRCSZ_ERLY_TPT(dev_priv, pipe),
>  		       PIPESRC_HEIGHT(et_y_position));
> @@ -548,7 +548,7 @@ static void i9xx_cursor_update_sel_fetch_arm(struct intel_plane *plane,
>  					  val);
>  		}
>  
> -		intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id),
> +		intel_de_write_fw(dev_priv, SEL_FETCH_CUR_CTL(pipe),
>  				  plane_state->ctl);
>  	} else {
>  		/* Wa_16021440873 */
> diff --git a/drivers/gpu/drm/i915/display/intel_cursor_regs.h b/drivers/gpu/drm/i915/display/intel_cursor_regs.h
> index 270c26c2e6df..ab02d497fba6 100644
> --- a/drivers/gpu/drm/i915/display/intel_cursor_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cursor_regs.h
> @@ -95,4 +95,9 @@
>  #define _CUR_BUF_CFG_B		0x7117c
>  #define CUR_BUF_CFG(pipe)	_MMIO_PIPE((pipe), _CUR_BUF_CFG_A, _CUR_BUF_CFG_B)
>  
> +#define _SEL_FETCH_CUR_CTL_A	0x70880 /* mtl+ */
> +#define _SEL_FETCH_CUR_CTL_B	0x71880
> +#define SEL_FETCH_CUR_CTL(pipe)	_MMIO_PIPE((pipe), _SEL_FETCH_CUR_CTL_A, _SEL_FETCH_CUR_CTL_A)

_SEL_FETCH_CUR_CTL_A is doubled, the latter should be _B.

With that,

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

I must admit I was trying to follow how PLANE_SEL_FETCH_CTL(pipe,
CURSOR_A) ends up being identical to this new SEL_FETCH_CUR_CTL(pipe),
but holy crap it trips my brain completely. How did we come up with so
many levels of abstractions for this stuff, in such complicated ways?!
:o


> +#define   SEL_FETCH_CUR_CTL_ENABLE	REG_BIT(31)
> +
>  #endif /* __INTEL_CURSOR_REGS_H__ */

-- 
Jani Nikula, Intel