[PATCH 07/10] drm/i915/crt: s/pipe_config/crtc_state/
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Nov 7 16:11:20 UTC 2024
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Call the crtc state 'crtc_state' rather than 'pipe_config',
as is the modern style.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 62 ++++++++++++------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 4784a858b4a2..0962a239288b 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -150,27 +150,27 @@ static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
}
static void intel_crt_get_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc_state *crtc_state)
{
- pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
+ crtc_state->output_types |= BIT(INTEL_OUTPUT_ANALOG);
- pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
+ crtc_state->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
- pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
+ crtc_state->hw.adjusted_mode.crtc_clock = crtc_state->port_clock;
}
static void hsw_crt_get_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc_state *crtc_state)
{
- lpt_pch_get_config(pipe_config);
+ lpt_pch_get_config(crtc_state);
- hsw_ddi_get_config(encoder, pipe_config);
+ hsw_ddi_get_config(encoder, crtc_state);
- pipe_config->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
- DRM_MODE_FLAG_NHSYNC |
- DRM_MODE_FLAG_PVSYNC |
- DRM_MODE_FLAG_NVSYNC);
- pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
+ crtc_state->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+ DRM_MODE_FLAG_NHSYNC |
+ DRM_MODE_FLAG_PVSYNC |
+ DRM_MODE_FLAG_NVSYNC);
+ crtc_state->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
/* Note: The caller is required to filter out dpms modes not supported by the
@@ -408,48 +408,48 @@ intel_crt_mode_valid(struct drm_connector *connector,
}
static int intel_crt_compute_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config,
+ struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct drm_display_mode *adjusted_mode =
- &pipe_config->hw.adjusted_mode;
+ &crtc_state->hw.adjusted_mode;
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return -EINVAL;
- pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
- pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+ crtc_state->sink_format = INTEL_OUTPUT_FORMAT_RGB;
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
return 0;
}
static int pch_crt_compute_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config,
+ struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct drm_display_mode *adjusted_mode =
- &pipe_config->hw.adjusted_mode;
+ &crtc_state->hw.adjusted_mode;
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return -EINVAL;
- pipe_config->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(pipe_config))
+ crtc_state->has_pch_encoder = true;
+ if (!intel_fdi_compute_pipe_bpp(crtc_state))
return -EINVAL;
- pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
return 0;
}
static int hsw_crt_compute_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config,
+ struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode =
- &pipe_config->hw.adjusted_mode;
+ &crtc_state->hw.adjusted_mode;
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return -EINVAL;
@@ -459,30 +459,30 @@ static int hsw_crt_compute_config(struct intel_encoder *encoder,
adjusted_mode->crtc_hblank_start > 4096)
return -EINVAL;
- pipe_config->has_pch_encoder = true;
- if (!intel_fdi_compute_pipe_bpp(pipe_config))
+ crtc_state->has_pch_encoder = true;
+ if (!intel_fdi_compute_pipe_bpp(crtc_state))
return -EINVAL;
- pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
/* LPT FDI RX only supports 8bpc. */
if (HAS_PCH_LPT(dev_priv)) {
/* TODO: Check crtc_state->max_link_bpp_x16 instead of bw_constrained */
- if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
+ if (crtc_state->bw_constrained && crtc_state->pipe_bpp < 24) {
drm_dbg_kms(display->drm,
"LPT only supports 24bpp\n");
return -EINVAL;
}
- pipe_config->pipe_bpp = 24;
+ crtc_state->pipe_bpp = 24;
}
/* FDI must always be 2.7 GHz */
- pipe_config->port_clock = 135000 * 2;
+ crtc_state->port_clock = 135000 * 2;
- pipe_config->enhanced_framing = true;
+ crtc_state->enhanced_framing = true;
- adjusted_mode->crtc_clock = lpt_iclkip(pipe_config);
+ adjusted_mode->crtc_clock = lpt_iclkip(crtc_state);
return 0;
}
--
2.45.2
More information about the Intel-gfx
mailing list