[PATCH 09/10] drm/i915/crt: Rename some variables
Jani Nikula
jani.nikula at linux.intel.com
Fri Nov 8 13:16:27 UTC 2024
On Thu, 07 Nov 2024, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Rename a bunch of local variables to the preferred
> encoder/connector from intel_encoder/intel_connector.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_crt.c | 44 +++++++++++-------------
> 1 file changed, 20 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
> index 5c3c6bc16a9e..b243ab51bdf0 100644
> --- a/drivers/gpu/drm/i915/display/intel_crt.c
> +++ b/drivers/gpu/drm/i915/display/intel_crt.c
> @@ -861,7 +861,7 @@ intel_crt_detect(struct drm_connector *connector,
> struct intel_display *display = to_intel_display(connector->dev);
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
> - struct intel_encoder *intel_encoder = &crt->base;
> + struct intel_encoder *encoder = &crt->base;
> struct drm_atomic_state *state;
> intel_wakeref_t wakeref;
> int status;
> @@ -877,8 +877,7 @@ intel_crt_detect(struct drm_connector *connector,
> return connector->status;
>
> if (display->params.load_detect_test) {
> - wakeref = intel_display_power_get(dev_priv,
> - intel_encoder->power_domain);
> + wakeref = intel_display_power_get(dev_priv, encoder->power_domain);
> goto load_detect;
> }
>
> @@ -886,8 +885,7 @@ intel_crt_detect(struct drm_connector *connector,
> if (dmi_check_system(intel_spurious_crt_detect))
> return connector_status_disconnected;
>
> - wakeref = intel_display_power_get(dev_priv,
> - intel_encoder->power_domain);
> + wakeref = intel_display_power_get(dev_priv, encoder->power_domain);
>
> if (I915_HAS_HOTPLUG(display)) {
> /* We can not rely on the HPD pin always being correctly wired
> @@ -944,7 +942,7 @@ intel_crt_detect(struct drm_connector *connector,
> }
>
> out:
> - intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref);
> + intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
>
> return status;
> }
> @@ -954,7 +952,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
> struct intel_display *display = to_intel_display(connector->dev);
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
> - struct intel_encoder *intel_encoder = &crt->base;
> + struct intel_encoder *encoder = &crt->base;
> intel_wakeref_t wakeref;
> struct i2c_adapter *ddc;
> int ret;
> @@ -962,8 +960,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
> if (!intel_display_driver_check_access(dev_priv))
> return drm_edid_connector_add_modes(connector);
>
> - wakeref = intel_display_power_get(dev_priv,
> - intel_encoder->power_domain);
> + wakeref = intel_display_power_get(dev_priv, encoder->power_domain);
>
> ret = intel_crt_ddc_get_modes(connector, connector->ddc);
> if (ret || !IS_G4X(dev_priv))
> @@ -974,7 +971,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
> ret = intel_crt_ddc_get_modes(connector, ddc);
>
> out:
> - intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref);
> + intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
>
> return ret;
> }
> @@ -1026,9 +1023,8 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
> void intel_crt_init(struct intel_display *display)
> {
> struct drm_i915_private *dev_priv = to_i915(display->drm);
> - struct drm_connector *connector;
> + struct intel_connector *connector;
> struct intel_crt *crt;
> - struct intel_connector *intel_connector;
> i915_reg_t adpa_reg;
> u8 ddc_pin;
> u32 adpa;
> @@ -1063,17 +1059,17 @@ void intel_crt_init(struct intel_display *display)
> if (!crt)
> return;
>
> - intel_connector = intel_connector_alloc();
> - if (!intel_connector) {
> + connector = intel_connector_alloc();
> + if (!connector) {
> kfree(crt);
> return;
> }
>
> ddc_pin = display->vbt.crt_ddc_pin;
>
> - connector = &intel_connector->base;
> - crt->connector = intel_connector;
> - drm_connector_init_with_ddc(display->drm, connector,
> + crt->connector = connector;
> +
> + drm_connector_init_with_ddc(display->drm, &connector->base,
> &intel_crt_connector_funcs,
> DRM_MODE_CONNECTOR_VGA,
> intel_gmbus_get_adapter(display, ddc_pin));
> @@ -1081,7 +1077,7 @@ void intel_crt_init(struct intel_display *display)
> drm_encoder_init(display->drm, &crt->base.base, &intel_crt_enc_funcs,
> DRM_MODE_ENCODER_DAC, "CRT");
>
> - intel_connector_attach_encoder(intel_connector, &crt->base);
> + intel_connector_attach_encoder(connector, &crt->base);
>
> crt->base.type = INTEL_OUTPUT_ANALOG;
> crt->base.cloneable = BIT(INTEL_OUTPUT_DVO) | BIT(INTEL_OUTPUT_HDMI);
> @@ -1091,7 +1087,7 @@ void intel_crt_init(struct intel_display *display)
> crt->base.pipe_mask = ~0;
>
> if (DISPLAY_VER(display) != 2)
> - connector->interlace_allowed = true;
> + connector->base.interlace_allowed = true;
>
> crt->adpa_reg = adpa_reg;
>
> @@ -1101,11 +1097,11 @@ void intel_crt_init(struct intel_display *display)
> !dmi_check_system(intel_spurious_crt_detect)) {
> crt->base.hpd_pin = HPD_CRT;
> crt->base.hotplug = intel_encoder_hotplug;
> - intel_connector->polled = DRM_CONNECTOR_POLL_HPD;
> + connector->polled = DRM_CONNECTOR_POLL_HPD;
> } else {
> - intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
> + connector->polled = DRM_CONNECTOR_POLL_CONNECT;
> }
> - intel_connector->base.polled = intel_connector->polled;
> + connector->base.polled = connector->polled;
>
> if (HAS_DDI(display)) {
> assert_port_valid(dev_priv, PORT_E);
> @@ -1138,9 +1134,9 @@ void intel_crt_init(struct intel_display *display)
> crt->base.get_hw_state = intel_crt_get_hw_state;
> crt->base.enable = intel_enable_crt;
> }
> - intel_connector->get_hw_state = intel_connector_get_hw_state;
> + connector->get_hw_state = intel_connector_get_hw_state;
>
> - drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
> + drm_connector_helper_add(&connector->base, &intel_crt_connector_helper_funcs);
>
> /*
> * TODO: find a proper way to discover whether we need to set the the
--
Jani Nikula, Intel
More information about the Intel-gfx
mailing list