[PATCH 1/2] drm/i915/watermark: Refactor dpkgc code
Govindapillai, Vinod
vinod.govindapillai at intel.com
Fri Nov 15 06:23:42 UTC 2024
On Fri, 2024-11-15 at 02:40 +0000, Kandpal, Suraj wrote:
>
>
> > -----Original Message-----
> > From: Govindapillai, Vinod <vinod.govindapillai at intel.com>
> > Sent: Thursday, November 14, 2024 6:12 PM
> > To: Kandpal, Suraj <suraj.kandpal at intel.com>; intel-xe at lists.freedesktop.org;
> > intel-gfx at lists.freedesktop.org
> > Cc: Syrjala, Ville <ville.syrjala at intel.com>
> > Subject: Re: [PATCH 1/2] drm/i915/watermark: Refactor dpkgc code
> >
> > Hi,
> >
> > I guess this is mostly ok. But some minor comments...
> >
> > On Thu, 2024-11-14 at 10:00 +0530, Suraj Kandpal wrote:
> > > We move our dpkgc function for the below reasons:
> > > - We want to make sure we have all the required values specially
> > > linetime which is computed after intel_wm_compute, this will also help
> > > implement some WA's which require linetime.
> > > -We do not want to write into any registers during compute_config
> > > phase While we are at it do some more refactors in the function like:
> > > -Use intel_display wherever possible
> > > -Move away from using enable_dpkgc bool and call it fixed_refresh_rate
> > > -Optimize value prepration
> > >
> > > --v2
> > > -No need to save anything in intel_display structure [Vinod] -Move
> > > computation and writing into register to intel_atomic_commit_tail
> > > [Vinod]
> > >
> > > Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> >
> > Probably some better clarity on the subject Something like
> > drm/i915/display: Refactor handling of dpkgc latency programming Btw, i
> > didn't find any patches with "drm/i915/watermark" on git log.
> >
> >
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 2 +
> > > drivers/gpu/drm/i915/display/intel_wm.c | 57 ++++++++++++++++++++
> > > drivers/gpu/drm/i915/display/intel_wm.h | 2 +
> > > drivers/gpu/drm/i915/display/skl_watermark.c | 52 ------------------
> > > 4 files changed, 61 insertions(+), 52 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index e790a2de5b3d..4f8e45a794bb 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -7826,6 +7826,8 @@ static void intel_atomic_commit_tail(struct
> > intel_atomic_state *state)
> > > /* Now enable the clocks, plane, pipe, and connectors that we set up.
> > */
> > > dev_priv->display.funcs.display->commit_modeset_enables(state);
> > >
> > > + intel_program_dpkgc_latency(state, dev_priv);
> > "dev_priv" is redundant here as we are supposed to use intel_display and you
> > can get display from
> > to_intel_display(state) in intel_program_dpkgc_latency
>
> We require drm_i915_private as we need to pass it to skl_get_max_latency which takes i915 as an
> argument.
Eventually all those references to drm_i915_private will be replaced. There are many patches from
Jani already modifying many of those and he has been recommending usage of intel_display in new
patches as much as possible.
You can get i915 = to_i915(display->drm) inside intel_program_dpkgc_latency for
skl_watermark_max_latency().
Also you missed the grouping of variable declarations with initialization first in
intel_program_dpkgc_latency() in the next version.
BR
Vinod
>
> >
> > > if (state->modeset)
> > > intel_set_cdclk_post_plane_update(state);
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_wm.c
> > b/drivers/gpu/drm/i915/display/intel_wm.c
> > > index d7dc49aecd27..620873d1244f 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_wm.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_wm.c
> > > @@ -7,9 +7,18 @@
> > >
> > > #include "i915_drv.h"
> > > #include "i9xx_wm.h"
> > > +#include "intel_de.h"
> > > #include "intel_display_types.h"
> > > #include "intel_wm.h"
> > > #include "skl_watermark.h"
> > > +#include "skl_watermark_regs.h"
> > > +
> > > +/*
> > > + * It is expected that DSB can do posted writes to every register in
> > > + * the pipe and planes within 100us. For flip queue use case, the
> > > + * recommended DSB execution time is 100us + one SAGV block time.
> > > + */
> > > +#define DSB_EXE_TIME 100
> > >
> > > /**
> > > * intel_update_watermarks - update FIFO watermark values based on
> > current modes
> > > @@ -131,6 +140,54 @@ bool intel_wm_plane_visible(const struct
> > intel_crtc_state *crtc_state,
> > > return plane_state->uapi.visible;
> > > }
> > >
> > > +/*
> > > + * If Fixed Refresh Rate or For VRR case Vmin = Vmax = Flipline:
> > > + * Program DEEP PKG_C_LATENCY Pkg C with highest valid latency from
> > > + * watermark level1 and up and above. If watermark level 1 is
> > > + * invalid program it with all 1's.
> > > + * Program PKG_C_LATENCY Added Wake Time = DSB execution time
> > > + * If Variable Refresh Rate where Vmin != Vmax != Flipline:
> > > + * Program DEEP PKG_C_LATENCY Pkg C with all 1's.
> > > + * Program PKG_C_LATENCY Added Wake Time = 0
> > > + */
> > > +void
> > > +intel_program_dpkgc_latency(struct intel_atomic_state *state,
> > > + struct drm_i915_private *i915)
> > > +{
> > > + struct intel_display *display = to_intel_display(state);
> > > + struct intel_crtc *crtc;
> > > + struct intel_crtc_state *new_crtc_state;
> > > + u32 max_latency = LNL_PKG_C_LATENCY_MASK;
> > > + u32 clear = 0, val = 0;
> > No need to init these.
> >
> > > + u32 added_waketime = 0;
> > > + int i;
> > > + bool fixed_refresh_rate = false;
> > Also pls place those variable declarations with initializations first and then the
> > rest.
> >
>
> Got it
>
> > > +
> > > + if (DISPLAY_VER(display) < 20)
> > > + return;
> > > +
> > > + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > > + if ((new_crtc_state->vrr.vmin == new_crtc_state->vrr.vmax &&
> > > + new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline) ||
> > > + !new_crtc_state->vrr.enable)
> > I assume new_crtc_state->vrr.vmin/vmax/flipline etc are valid only if
> > new_crtc_state->vrr.enable is
> > true. I guess then it is better to keep the !new_crtc_state->vrr.enable as first
> > condition
>
> Sure will fix that
>
> >
> > if (!new_crtc_state->vrr.enable || (new_crtc_state->vrr.vmin ==
> > new_crtc_state->vrr.vmax &&
> > new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline)) )
> >
> > > + fixed_refresh_rate = true;
> > > + }
> > > +
> > > + if (fixed_refresh_rate) {
> > > + max_latency = skl_watermark_max_latency(i915, 1);
> > > + if (max_latency == 0)
> > > + max_latency = LNL_PKG_C_LATENCY_MASK;
> > > + added_waketime = DSB_EXE_TIME +
> > > + display->sagv.block_time_us;
> > > + }
> > > +
> > > + clear |= LNL_ADDED_WAKE_TIME_MASK |
> > LNL_PKG_C_LATENCY_MASK;
> > > + val |= REG_FIELD_PREP(LNL_PKG_C_LATENCY_MASK, max_latency) |
> > > + REG_FIELD_PREP(LNL_ADDED_WAKE_TIME_MASK,
> > added_waketime);
> > As mentioned before you don't need |= in these above statements
>
> Sure.
>
> Regards,
> Suraj Kandpal
>
> >
> > > +
> > > + intel_de_rmw(display, LNL_PKG_C_LATENCY, clear, val);
> > > +}
> > > +
> > > void intel_print_wm_latency(struct drm_i915_private *dev_priv,
> > > const char *name, const u16 wm[])
> > > {
> > > diff --git a/drivers/gpu/drm/i915/display/intel_wm.h
> > b/drivers/gpu/drm/i915/display/intel_wm.h
> > > index e97cdca89a5c..f47e1354605d 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_wm.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_wm.h
> > > @@ -31,5 +31,7 @@ void intel_print_wm_latency(struct drm_i915_private
> > *i915,
> > > const char *name, const u16 wm[]);
> > > void intel_wm_init(struct drm_i915_private *i915);
> > > void intel_wm_debugfs_register(struct drm_i915_private *i915);
> > > +void intel_program_dpkgc_latency(struct intel_atomic_state *state,
> > > + struct drm_i915_private *i915);
> > >
> > > #endif /* __INTEL_WM_H__ */
> > > diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c
> > > b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > index 1a4c1fa24820..d419edb196c6 100644
> > > --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> > > +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> > > @@ -28,12 +28,6 @@
> > > #include "skl_watermark.h"
> > > #include "skl_watermark_regs.h"
> > >
> > > -/*It is expected that DSB can do posted writes to every register in
> > > - * the pipe and planes within 100us. For flip queue use case, the
> > > - * recommended DSB execution time is 100us + one SAGV block time.
> > > - */
> > > -#define DSB_EXE_TIME 100
> > > -
> > > static void skl_sagv_disable(struct drm_i915_private *i915);
> > >
> > > /* Stores plane specific WM parameters */
> > > @@ -2844,51 +2838,12 @@ static int skl_wm_add_affected_planes(struct
> > intel_atomic_state *state,
> > > return 0;
> > > }
> > >
> > > -/*
> > > - * If Fixed Refresh Rate or For VRR case Vmin = Vmax = Flipline:
> > > - * Program DEEP PKG_C_LATENCY Pkg C with highest valid latency from
> > > - * watermark level1 and up and above. If watermark level 1 is
> > > - * invalid program it with all 1's.
> > > - * Program PKG_C_LATENCY Added Wake Time = DSB execution time
> > > - * If Variable Refresh Rate where Vmin != Vmax != Flipline:
> > > - * Program DEEP PKG_C_LATENCY Pkg C with all 1's.
> > > - * Program PKG_C_LATENCY Added Wake Time = 0
> > > - */
> > > -static void
> > > -skl_program_dpkgc_latency(struct drm_i915_private *i915, bool
> > enable_dpkgc)
> > > -{
> > > - u32 max_latency = 0;
> > > - u32 clear = 0, val = 0;
> > > - u32 added_wake_time = 0;
> > > -
> > > - if (DISPLAY_VER(i915) < 20)
> > > - return;
> > > -
> > > - if (enable_dpkgc) {
> > > - max_latency = skl_watermark_max_latency(i915, 1);
> > > - if (max_latency == 0)
> > > - max_latency = LNL_PKG_C_LATENCY_MASK;
> > > - added_wake_time = DSB_EXE_TIME +
> > > - i915->display.sagv.block_time_us;
> > > - } else {
> > > - max_latency = LNL_PKG_C_LATENCY_MASK;
> > > - added_wake_time = 0;
> > > - }
> > > -
> > > - clear |= LNL_ADDED_WAKE_TIME_MASK |
> > LNL_PKG_C_LATENCY_MASK;
> > > - val |= REG_FIELD_PREP(LNL_PKG_C_LATENCY_MASK, max_latency);
> > > - val |= REG_FIELD_PREP(LNL_ADDED_WAKE_TIME_MASK,
> > added_wake_time);
> > > -
> > > - intel_uncore_rmw(&i915->uncore, LNL_PKG_C_LATENCY, clear, val);
> > > -}
> > > -
> > > static int
> > > skl_compute_wm(struct intel_atomic_state *state)
> > > {
> > > struct intel_crtc *crtc;
> > > struct intel_crtc_state __maybe_unused *new_crtc_state;
> > > int ret, i;
> > > - bool enable_dpkgc = false;
> > >
> > > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > > ret = skl_build_pipe_wm(state, crtc);
> > > @@ -2913,15 +2868,8 @@ skl_compute_wm(struct intel_atomic_state
> > *state)
> > > ret = skl_wm_add_affected_planes(state, crtc);
> > > if (ret)
> > > return ret;
> > > -
> > > - if ((new_crtc_state->vrr.vmin == new_crtc_state->vrr.vmax &&
> > > - new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline) ||
> > > - !new_crtc_state->vrr.enable)
> > > - enable_dpkgc = true;
> > > }
> > >
> > > - skl_program_dpkgc_latency(to_i915(state->base.dev), enable_dpkgc);
> > > -
> > > skl_print_wm_changes(state);
> > >
> > > return 0;
>
More information about the Intel-gfx
mailing list