[PATCH 1/2] drm/i915/display: Refactor handling of dpkgc latency programming
Kandpal, Suraj
suraj.kandpal at intel.com
Fri Nov 15 10:28:47 UTC 2024
> -----Original Message-----
> From: Jani Nikula <jani.nikula at linux.intel.com>
> Sent: Friday, November 15, 2024 3:50 PM
> To: Kandpal, Suraj <suraj.kandpal at intel.com>; intel-xe at lists.freedesktop.org;
> intel-gfx at lists.freedesktop.org
> Cc: Govindapillai, Vinod <vinod.govindapillai at intel.com>; Syrjala, Ville
> <ville.syrjala at intel.com>; Kandpal, Suraj <suraj.kandpal at intel.com>
> Subject: Re: [PATCH 1/2] drm/i915/display: Refactor handling of dpkgc latency
> programming
>
> On Fri, 15 Nov 2024, Suraj Kandpal <suraj.kandpal at intel.com> wrote:
> > - We want to make sure we have all the required values specially
> > linetime which is computed after intel_wm_compute, this will also help
> > implement some WA's which require linetime.
> > -We do not want to write into any registers during compute_config
> > phase While we are at it do some more refactors in the function like:
> > -Use intel_display wherever possible
> > -Move away from using enable_dpkgc bool and call it fixed_refresh_rate
> > -Optimize value prepration
>
> Please write proper sentences instead of bullet points. And the general advice
> is to do one thing per patch.
Sure will fix that.
It was previously divided into 6 patches but squashed it after Vinod suggested to do you want me to go back to that convention
https://patchwork.freedesktop.org/series/141200/
>
> >
> > --v2
> > -No need to save anything in intel_display structure [Vinod] -Move
> > computation and writing into register to intel_atomic_commit_tail
> > [Vinod]
> >
> > --v3
> > -Rename the subject [Vinod]
> > -Rearrange the variable initialization and declaration [Vinod]
> > -Reaarange condition evaluation for fixed_refresh_rate [Vinod]
> >
> > Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 2 +
> > drivers/gpu/drm/i915/display/intel_wm.c | 56 ++++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_wm.h | 1 +
> > drivers/gpu/drm/i915/display/skl_watermark.c | 52 ------------------
> > 4 files changed, 59 insertions(+), 52 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index e790a2de5b3d..d1880e0a5d29 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -7826,6 +7826,8 @@ static void intel_atomic_commit_tail(struct
> intel_atomic_state *state)
> > /* Now enable the clocks, plane, pipe, and connectors that we set up.
> */
> > dev_priv->display.funcs.display->commit_modeset_enables(state);
> >
> > + intel_program_dpkgc_latency(state);
> > +
> > if (state->modeset)
> > intel_set_cdclk_post_plane_update(state);
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_wm.c
> > b/drivers/gpu/drm/i915/display/intel_wm.c
> > index d7dc49aecd27..4a2caf9cb03e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_wm.c
> > +++ b/drivers/gpu/drm/i915/display/intel_wm.c
> > @@ -7,9 +7,18 @@
> >
> > #include "i915_drv.h"
> > #include "i9xx_wm.h"
> > +#include "intel_de.h"
> > #include "intel_display_types.h"
> > #include "intel_wm.h"
> > #include "skl_watermark.h"
> > +#include "skl_watermark_regs.h"
> > +
> > +/*
> > + * It is expected that DSB can do posted writes to every register in
> > + * the pipe and planes within 100us. For flip queue use case, the
> > + * recommended DSB execution time is 100us + one SAGV block time.
> > + */
> > +#define DSB_EXE_TIME 100
> >
> > /**
> > * intel_update_watermarks - update FIFO watermark values based on
> > current modes @@ -131,6 +140,53 @@ bool intel_wm_plane_visible(const
> struct intel_crtc_state *crtc_state,
> > return plane_state->uapi.visible;
> > }
> >
> > +/*
> > + * If Fixed Refresh Rate or For VRR case Vmin = Vmax = Flipline:
> > + * Program DEEP PKG_C_LATENCY Pkg C with highest valid latency from
> > + * watermark level1 and up and above. If watermark level 1 is
> > + * invalid program it with all 1's.
> > + * Program PKG_C_LATENCY Added Wake Time = DSB execution time
> > + * If Variable Refresh Rate where Vmin != Vmax != Flipline:
> > + * Program DEEP PKG_C_LATENCY Pkg C with all 1's.
> > + * Program PKG_C_LATENCY Added Wake Time = 0 */ void
> > +intel_program_dpkgc_latency(struct intel_atomic_state *state)
>
> The function prefix should match the file name i.e. a function in intel_foo.[ch]
> should be named intel_foo_bar().
>
Well it was previously intel_wm_program_dpkgc_latency but Vinod had asked to rename the function
> But why is the function being relocated at all? That's also not explained in the
> commit message.
The reason is in the commit message
"- We want to make sure we have all the required values specially
linetime which is computed after intel_wm_compute, this will also help
implement some WA's which require linetime."
Will reword the commit message into sentences to make it more clearer.
Regards,
Suraj Kandpal
>
> > +{
> > + struct intel_display *display = to_intel_display(state);
> > + struct drm_i915_private *i915 = to_i915(display->drm);
> > + struct intel_crtc *crtc;
> > + struct intel_crtc_state *new_crtc_state;
> > + u32 max_latency = LNL_PKG_C_LATENCY_MASK, added_waketime = 0;
> > + bool fixed_refresh_rate = false;
> > + u32 clear, val;
> > + int i;
> > +
> > + if (DISPLAY_VER(display) < 20)
> > + return;
> > +
> > + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > + if (!new_crtc_state->vrr.enable ||
> > + (new_crtc_state->vrr.vmin == new_crtc_state->vrr.vmax &&
> > + new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline))
> > + fixed_refresh_rate = true;
> > + }
> > +
> > + if (fixed_refresh_rate) {
> > + max_latency = skl_watermark_max_latency(i915, 1);
> > + if (max_latency == 0)
> > + max_latency = LNL_PKG_C_LATENCY_MASK;
> > + added_waketime = DSB_EXE_TIME +
> > + display->sagv.block_time_us;
> > + }
> > +
> > + clear = LNL_ADDED_WAKE_TIME_MASK |
> LNL_PKG_C_LATENCY_MASK;
> > + val = REG_FIELD_PREP(LNL_PKG_C_LATENCY_MASK, max_latency) |
> > + REG_FIELD_PREP(LNL_ADDED_WAKE_TIME_MASK,
> added_waketime);
> > +
> > + intel_de_rmw(display, LNL_PKG_C_LATENCY, clear, val); }
> > +
> > void intel_print_wm_latency(struct drm_i915_private *dev_priv,
> > const char *name, const u16 wm[]) { diff --git
> > a/drivers/gpu/drm/i915/display/intel_wm.h
> > b/drivers/gpu/drm/i915/display/intel_wm.h
> > index e97cdca89a5c..07e3d9359d73 100644
> > --- a/drivers/gpu/drm/i915/display/intel_wm.h
> > +++ b/drivers/gpu/drm/i915/display/intel_wm.h
> > @@ -31,5 +31,6 @@ void intel_print_wm_latency(struct drm_i915_private
> *i915,
> > const char *name, const u16 wm[]); void
> intel_wm_init(struct
> > drm_i915_private *i915); void intel_wm_debugfs_register(struct
> > drm_i915_private *i915);
> > +void intel_program_dpkgc_latency(struct intel_atomic_state *state);
> >
> > #endif /* __INTEL_WM_H__ */
> > diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c
> > b/drivers/gpu/drm/i915/display/skl_watermark.c
> > index 1a4c1fa24820..d419edb196c6 100644
> > --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> > +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> > @@ -28,12 +28,6 @@
> > #include "skl_watermark.h"
> > #include "skl_watermark_regs.h"
> >
> > -/*It is expected that DSB can do posted writes to every register in
> > - * the pipe and planes within 100us. For flip queue use case, the
> > - * recommended DSB execution time is 100us + one SAGV block time.
> > - */
> > -#define DSB_EXE_TIME 100
> > -
> > static void skl_sagv_disable(struct drm_i915_private *i915);
> >
> > /* Stores plane specific WM parameters */ @@ -2844,51 +2838,12 @@
> > static int skl_wm_add_affected_planes(struct intel_atomic_state *state,
> > return 0;
> > }
> >
> > -/*
> > - * If Fixed Refresh Rate or For VRR case Vmin = Vmax = Flipline:
> > - * Program DEEP PKG_C_LATENCY Pkg C with highest valid latency from
> > - * watermark level1 and up and above. If watermark level 1 is
> > - * invalid program it with all 1's.
> > - * Program PKG_C_LATENCY Added Wake Time = DSB execution time
> > - * If Variable Refresh Rate where Vmin != Vmax != Flipline:
> > - * Program DEEP PKG_C_LATENCY Pkg C with all 1's.
> > - * Program PKG_C_LATENCY Added Wake Time = 0
> > - */
> > -static void
> > -skl_program_dpkgc_latency(struct drm_i915_private *i915, bool
> > enable_dpkgc) -{
> > - u32 max_latency = 0;
> > - u32 clear = 0, val = 0;
> > - u32 added_wake_time = 0;
> > -
> > - if (DISPLAY_VER(i915) < 20)
> > - return;
> > -
> > - if (enable_dpkgc) {
> > - max_latency = skl_watermark_max_latency(i915, 1);
> > - if (max_latency == 0)
> > - max_latency = LNL_PKG_C_LATENCY_MASK;
> > - added_wake_time = DSB_EXE_TIME +
> > - i915->display.sagv.block_time_us;
> > - } else {
> > - max_latency = LNL_PKG_C_LATENCY_MASK;
> > - added_wake_time = 0;
> > - }
> > -
> > - clear |= LNL_ADDED_WAKE_TIME_MASK |
> LNL_PKG_C_LATENCY_MASK;
> > - val |= REG_FIELD_PREP(LNL_PKG_C_LATENCY_MASK, max_latency);
> > - val |= REG_FIELD_PREP(LNL_ADDED_WAKE_TIME_MASK,
> added_wake_time);
> > -
> > - intel_uncore_rmw(&i915->uncore, LNL_PKG_C_LATENCY, clear, val);
> > -}
> > -
> > static int
> > skl_compute_wm(struct intel_atomic_state *state) {
> > struct intel_crtc *crtc;
> > struct intel_crtc_state __maybe_unused *new_crtc_state;
> > int ret, i;
> > - bool enable_dpkgc = false;
> >
> > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > ret = skl_build_pipe_wm(state, crtc); @@ -2913,15 +2868,8
> @@
> > skl_compute_wm(struct intel_atomic_state *state)
> > ret = skl_wm_add_affected_planes(state, crtc);
> > if (ret)
> > return ret;
> > -
> > - if ((new_crtc_state->vrr.vmin == new_crtc_state->vrr.vmax &&
> > - new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline)
> ||
> > - !new_crtc_state->vrr.enable)
> > - enable_dpkgc = true;
> > }
> >
> > - skl_program_dpkgc_latency(to_i915(state->base.dev), enable_dpkgc);
> > -
> > skl_print_wm_changes(state);
> >
> > return 0;
>
> --
> Jani Nikula, Intel
More information about the Intel-gfx
mailing list