[PATCH v3 12/12] drm/client: Add client-lib module
Cavitt, Jonathan
jonathan.cavitt at intel.com
Tue Oct 8 21:42:35 UTC 2024
-----Original Message-----
From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of Thomas Zimmermann
Sent: Tuesday, October 8, 2024 5:00 AM
To: simona at ffwll.ch; airlied at gmail.com; javierm at redhat.com; jfalempe at redhat.com
Cc: dri-devel at lists.freedesktop.org; amd-gfx at lists.freedesktop.org; intel-gfx at lists.freedesktop.org; intel-xe at lists.freedesktop.org; Thomas Zimmermann <tzimmermann at suse.de>
Subject: [PATCH v3 12/12] drm/client: Add client-lib module
>
> Add drm_client_lib.ko to contain DRM's built-in client. Move the
> existing client for fbdev emulation into the new module. Protect the
> new module behind CONFIG_DRM_CLIENT_LIB.
>
> The Kconfig rules separate the DRM drivers from the DRM clients. A
> driver can opt into the default clients, but the user configures
> each client individually. To do so, DRM drivers still select
> DRM_CLIENT_SELECTION. The option is now a tristate that further
> selects all dependencies of the enabled DRM clients. There's
> a menu option for each client. Enabling at least one client also
> selects DRM_CLIENT_SETUP, so that drivers call drm_client_setup().
> New DRM clients should depend on DRM_CLIENT_SELECTION.
>
> There are existing kernel options in drm_fb_helper.o, so leave this
> file in the KMS-helper module for now.
>
> v3:
> - fix commit changelog
> v2:
> - keep client code in core
> - protect lib with DRM_CLIENT_LIB
> - remove duplicate line from Makefile (Jocelyn)
>
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
LGTM.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt at intel.com>
-Jonathan Cavitt
> ---
> drivers/gpu/drm/Kconfig | 26 ++++++++++++++++++++-----
> drivers/gpu/drm/Makefile | 14 +++++++++----
> drivers/gpu/drm/drm_client_setup.c | 3 +++
> drivers/gpu/drm/drm_kms_helper_common.c | 3 +++
> 4 files changed, 37 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index ea1cc924528c..a9055c0b9a1a 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -9,8 +9,6 @@ menuconfig DRM
> tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
> depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
> select DRM_PANEL_ORIENTATION_QUIRKS
> - select DRM_KMS_HELPER if DRM_FBDEV_EMULATION
> - select FB_CORE if DRM_FBDEV_EMULATION
> select HDMI
> select I2C
> select DMA_SHARED_BUFFER
> @@ -218,10 +216,19 @@ config DRM_CLIENT
> option. Drivers that support the default clients should
> select DRM_CLIENT_SELECTION instead.
>
> +config DRM_CLIENT_LIB
> + tristate
> + depends on DRM
> + select DRM_KMS_HELPER if DRM_FBDEV_EMULATION
> + select FB_CORE if DRM_FBDEV_EMULATION
> + help
> + This option enables the DRM client library and selects all
> + modules and components according to the enabled clients.
> +
> config DRM_CLIENT_SELECTION
> - bool
> + tristate
> depends on DRM
> - select DRM_CLIENT_SETUP if DRM_FBDEV_EMULATION
> + select DRM_CLIENT_LIB if DRM_FBDEV_EMULATION
> help
> Drivers that support in-kernel DRM clients have to select this
> option.
> @@ -229,11 +236,18 @@ config DRM_CLIENT_SELECTION
> config DRM_CLIENT_SETUP
> bool
> depends on DRM_CLIENT_SELECTION
> + help
> + Enables the DRM client selection. DRM drivers that support the
> + default clients should select DRM_CLIENT_SELECTION instead.
> +
> +menu "Supported DRM clients"
> + depends on DRM_CLIENT_SELECTION
>
> config DRM_FBDEV_EMULATION
> bool "Enable legacy fbdev support for your modesetting driver"
> - depends on DRM
> + depends on DRM_CLIENT_SELECTION
> select DRM_CLIENT
> + select DRM_CLIENT_SETUP
> select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
> default FB
> help
> @@ -272,6 +286,8 @@ config DRM_FBDEV_LEAK_PHYS_SMEM
> If in doubt, say "N" or spread the word to your closed source
> library vendor.
>
> +endmenu
> +
> config DRM_LOAD_EDID_FIRMWARE
> bool "Allow to specify an EDID data set instead of probing for it"
> depends on DRM
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index c3e5d353588e..edfd2ebaf153 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -145,13 +145,19 @@ drm_kms_helper-y := \
> drm_probe_helper.o \
> drm_self_refresh_helper.o \
> drm_simple_kms_helper.o
> -drm_kms_helper-$(CONFIG_DRM_CLIENT_SETUP) += \
> - drm_client_setup.o
> drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
> -drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += \
> +obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
> +
> +#
> +# DRM clients
> +#
> +
> +drm_client_lib-y := \
> + drm_client_setup.o
> +drm_client_lib-$(CONFIG_DRM_FBDEV_EMULATION) += \
> drm_fbdev_client.o \
> drm_fb_helper.o
> -obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
> +obj-$(CONFIG_DRM_CLIENT_LIB) += drm_client_lib.o
>
> #
> # Drivers and the rest
> diff --git a/drivers/gpu/drm/drm_client_setup.c b/drivers/gpu/drm/drm_client_setup.c
> index 5969c4ffe31b..c14221ca5a0d 100644
> --- a/drivers/gpu/drm/drm_client_setup.c
> +++ b/drivers/gpu/drm/drm_client_setup.c
> @@ -64,3 +64,6 @@ void drm_client_setup_with_color_mode(struct drm_device *dev, unsigned int color
> drm_client_setup_with_fourcc(dev, fourcc);
> }
> EXPORT_SYMBOL(drm_client_setup_with_color_mode);
> +
> +MODULE_DESCRIPTION("In-kernel DRM clients");
> +MODULE_LICENSE("GPL and additional rights");
> diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
> index cfdbc1ac88dc..ecff0b1414ac 100644
> --- a/drivers/gpu/drm/drm_kms_helper_common.c
> +++ b/drivers/gpu/drm/drm_kms_helper_common.c
> @@ -31,11 +31,13 @@
>
> #if defined(CONFIG_DRM_FBDEV_EMULATION)
> bool drm_fbdev_emulation = true;
> +EXPORT_SYMBOL(drm_fbdev_emulation);
> module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
> MODULE_PARM_DESC(fbdev_emulation,
> "Enable legacy fbdev emulation [default=true]");
>
> int drm_fbdev_overalloc = CONFIG_DRM_FBDEV_OVERALLOC;
> +EXPORT_SYMBOL(drm_fbdev_overalloc);
> module_param(drm_fbdev_overalloc, int, 0444);
> MODULE_PARM_DESC(drm_fbdev_overalloc,
> "Overallocation of the fbdev buffer (%) [default="
> @@ -55,6 +57,7 @@ MODULE_PARM_DESC(drm_fbdev_overalloc,
> * considered as a broken and legacy behaviour from a modern fbdev device.
> */
> bool drm_leak_fbdev_smem;
> +EXPORT_SYMBOL(drm_leak_fbdev_smem);
> #if IS_ENABLED(CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM)
> module_param_unsafe(drm_leak_fbdev_smem, bool, 0600);
> MODULE_PARM_DESC(drm_leak_fbdev_smem,
> --
> 2.46.0
>
>
More information about the Intel-gfx
mailing list