[PATCH 08/10] drm/i915/xe3lpd: Add new bit range of MAX swing setup

[Jani Nikula]

On Tue, 08 Oct 2024, Matt Atwood <matthew.s.atwood at intel.com> wrote:
> From: Suraj Kandpal <suraj.kandpal at intel.com>
>
> Add new bit range for Max PHY Swing Setup in PORT_ALPM_CTL
> register for DISPLAY_VER >= 30.
>
> Bspec: 70277
> Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> Signed-off-by: Matt Atwood <matthew.s.atwood at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_alpm.c     | 2 +-
>  drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 +++-
>  2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
> index 55f3ae1e68c9..100ce776a203 100644
> --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> @@ -334,7 +334,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
>  		intel_de_write(display,
>  			       PORT_ALPM_CTL(port),
>  			       PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
> -			       PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
> +			       PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(display, 15) |
>  			       PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
>  			       PORT_ALPM_CTL_SILENCE_PERIOD(
>  				       intel_dp->alpm_parameters.silence_period_sym_clocks));
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index 0841242543ca..046e400704e8 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -299,7 +299,9 @@
>  #define PORT_ALPM_CTL(port)			_MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B)
>  #define  PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE	REG_BIT(31)
>  #define  PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK	REG_GENMASK(23, 20)
> -#define  PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val)	REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val)
> +#define  PTL_PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK	REG_GENMASK(25, 20)
> +#define  PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(display, val)	(DISPLAY_VER(display) >= 30 ? REG_FIELD_PREP(PTL_PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val) :\
> +							 REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val))

I'm inclined to think this is not a good direction. Please define
separate macros for different platforms.

BR,
Jani.


>  #define  PORT_ALPM_CTL_MAX_PHY_SWING_HOLD_MASK	REG_GENMASK(19, 16)
>  #define  PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(val)	REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_HOLD_MASK, val)
>  #define  PORT_ALPM_CTL_SILENCE_PERIOD_MASK	REG_GENMASK(7, 0)

-- 
Jani Nikula, Intel