[PATCH] drm/i915/color: Use correct variable to load lut
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Oct 9 08:50:30 UTC 2024
On Wed, Oct 09, 2024 at 08:46:20AM +0000, Kandpal, Suraj wrote:
>
>
> > -----Original Message-----
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Sent: Wednesday, October 9, 2024 12:25 PM
> > To: Kandpal, Suraj <suraj.kandpal at intel.com>
> > Cc: intel-xe at lists.freedesktop.org; intel-gfx at lists.freedesktop.org; Shankar,
> > Uma <uma.shankar at intel.com>; Borah, Chaitanya Kumar
> > <chaitanya.kumar.borah at intel.com>
> > Subject: Re: [PATCH] drm/i915/color: Use correct variable to load lut
> >
> > On Wed, Oct 09, 2024 at 12:07:53PM +0530, Suraj Kandpal wrote:
> > > Use the blob variable instead of post_csc_lut as it may end up being
> > > null.
> >
> > Not possible. We always have a LUT for each half in split gamma mode, and
> > if we don't then someone screwed up much earlier before we end up here.
> >
>
> If that is the case then the code line
> const struct drm_property_blob *blob = post_csc_lut ?: pre_csc_lut;
> wouldn't be needed but it has been added presumably because there are times
That is for the non-split gamma cases.
> that we reach here with post csc as null and in that case we at least make sure we are
> loading the correct lut hence the fix.
post_csc_lut is the correct one to load here. Trying to load
the pre_csc_lut twice is just complete nonsense. And if
post_csc_lut could somehow be NULL so could pre_csc_lut.
>
> Regards,
> Suraj Kandpal
>
> > >
> > > Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_color.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_color.c
> > > b/drivers/gpu/drm/i915/display/intel_color.c
> > > index caf1af039960..22b7090c4f6f 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_color.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_color.c
> > > @@ -1503,7 +1503,7 @@ static void ivb_load_luts(const struct
> > intel_crtc_state *crtc_state)
> > > ivb_load_lut_10(crtc_state, pre_csc_lut,
> > PAL_PREC_SPLIT_MODE |
> > > PAL_PREC_INDEX_VALUE(0));
> > > ivb_load_lut_ext_max(crtc_state);
> > > - ivb_load_lut_10(crtc_state, post_csc_lut,
> > PAL_PREC_SPLIT_MODE |
> > > + ivb_load_lut_10(crtc_state, blob, PAL_PREC_SPLIT_MODE |
> > > PAL_PREC_INDEX_VALUE(512));
> > > break;
> > > case GAMMA_MODE_MODE_10BIT:
> > > @@ -1531,7 +1531,7 @@ static void bdw_load_luts(const struct
> > intel_crtc_state *crtc_state)
> > > bdw_load_lut_10(crtc_state, pre_csc_lut,
> > PAL_PREC_SPLIT_MODE |
> > > PAL_PREC_INDEX_VALUE(0));
> > > ivb_load_lut_ext_max(crtc_state);
> > > - bdw_load_lut_10(crtc_state, post_csc_lut,
> > PAL_PREC_SPLIT_MODE |
> > > + bdw_load_lut_10(crtc_state, blob, PAL_PREC_SPLIT_MODE |
> > > PAL_PREC_INDEX_VALUE(512));
> > > break;
> > > case GAMMA_MODE_MODE_10BIT:
> > > --
> > > 2.43.2
> >
> > --
> > Ville Syrjälä
> > Intel
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list