[PATCH 6/7] drm/i915/psr: Add VRR send push interface for PSR usage

[Jani Nikula]

On Thu, 10 Oct 2024, Jouni Högander <jouni.hogander at intel.com> wrote:
> Add own interface for PSR usage to perform push on frontbuffer tracking
> invalidate and flush call backs. Use this new interface from PSR code.
>
> Signed-off-by: Jouni Högander <jouni.hogander at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_psr.c |  7 ++++++-
>  drivers/gpu/drm/i915/display/intel_vrr.c | 18 ++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_vrr.h |  4 ++++
>  3 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> index 5be8076475f0b..7959a33771b13 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -2326,8 +2326,13 @@ static void psr_force_exit(struct intel_dp *intel_dp)
>  	 * This workaround do not exist for platforms with display 10 or newer
>  	 * but testing proved that it works for up display 13, for newer
>  	 * than that testing will be needed.
> +	 *
> +	 * In Lunarlake we can use TRANS_PUSH mechanism to force sending update
> +	 * to sink.
>  	 */
> -	intel_de_write(display, CURSURFLIVE(display, intel_dp->psr.pipe), 0);
> +	DISPLAY_VER(display) >= 20 ?
> +		intel_vrr_psr_send_push(display, cpu_transcoder) :
> +		intel_de_write(display, CURSURFLIVE(display, intel_dp->psr.pipe), 0);
>  }
>  
>  void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_state)
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
> index 5925ade4591d4..d51830d173b61 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> @@ -328,6 +328,24 @@ void intel_vrr_send_push(const struct intel_crtc_state *crtc_state)
>  		       trans_push_val);
>  }
>  
> +/**
> + * intel_vrr_psr_send_push - Send push interface for PSR code
> + * @display: Intel display
> + * @cpu_transcoder: cpu_transcode
> + *
> + * This is for PSR usage to perform push on frontbuffer tracking invalidate and
> + * flush call back. PSR mutex should be taken by caller.
> + */
> +void intel_vrr_psr_send_push(struct intel_display *display,
> +			     enum transcoder cpu_transcoder)
> +{
> +	if (DISPLAY_VER(display) < 20)
> +		return;
> +
> +	intel_de_rmw(display, TRANS_PUSH(display, cpu_transcoder), 0,
> +		     TRANS_PUSH_SEND | LNL_TRANS_PUSH_PSR_PR_EN);
> +}
> +
>  bool intel_vrr_is_push_sent(const struct intel_crtc_state *crtc_state)
>  {
>  	struct intel_display *display = to_intel_display(crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.h b/drivers/gpu/drm/i915/display/intel_vrr.h
> index a75f159168c11..3da7ba12697ff 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.h
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.h
> @@ -12,6 +12,8 @@ struct drm_connector_state;
>  struct intel_atomic_state;
>  struct intel_connector;
>  struct intel_crtc_state;
> +struct intel_display;
> +enum transcoder;
>  
>  bool intel_vrr_is_capable(struct intel_connector *connector);
>  bool intel_vrr_is_in_range(struct intel_connector *connector, int vrefresh);
> @@ -25,6 +27,8 @@ bool intel_vrr_is_push_sent(const struct intel_crtc_state *crtc_state);
>  void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state);
>  void intel_vrr_psr_frame_change_enable(const struct intel_crtc_state *crtc_state);
>  void intel_vrr_psr_frame_change_disable(const struct intel_crtc_state *crtc_state);
> +void intel_vrr_psr_send_push(struct intel_display *display,
> +			     enum transcoder cpu_transcoder);

Nitpick, why not just make that parameter crtc_state like for all the
other functions?

BR,
Jani.

>  void intel_vrr_get_config(struct intel_crtc_state *crtc_state);
>  int intel_vrr_vmax_vblank_start(const struct intel_crtc_state *crtc_state);
>  int intel_vrr_vmin_vblank_start(const struct intel_crtc_state *crtc_state);

-- 
Jani Nikula, Intel