[PATCH 5/7] drm/i915/dp: Refactor pipe_bpp limits with dsc

Kandpal, Suraj suraj.kandpal at intel.com
Sun Oct 13 15:37:33 UTC 2024



> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Thursday, October 3, 2024 4:14 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: intel-xe at lists.freedesktop.org; Kandpal, Suraj
> <suraj.kandpal at intel.com>; jani.nikula at linux.intel.com
> Subject: [PATCH 5/7] drm/i915/dp: Refactor pipe_bpp limits with dsc
> 
> With DSC there are additional limits for pipe_bpp. Currently these are
> scattered in different places.
> Instead set the limits->pipe.max/min_bpp in one place and use them
> wherever required.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>

LGTM,
Reviewed-by: Suraj Kandpal <suraj.kandpal at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 43 ++++++++++---------------
>  1 file changed, 17 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 46f3b680afe9..55ee438a4fec 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2166,21 +2166,11 @@ int intel_dp_dsc_min_src_input_bpc(struct
> intel_display *display)  }
> 
>  static
> -bool is_dsc_pipe_bpp_sufficient(struct drm_i915_private *i915,
> -				struct link_config_limits *limits,
> +bool is_dsc_pipe_bpp_sufficient(struct link_config_limits *limits,
>  				int pipe_bpp)
>  {
> -	struct intel_display *display = to_intel_display(&i915->drm);
> -	int dsc_max_bpc, dsc_min_bpc, dsc_max_pipe_bpp,
> dsc_min_pipe_bpp;
> -
> -	dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(display);
> -	dsc_min_bpc = intel_dp_dsc_min_src_input_bpc(display);
> -
> -	dsc_max_pipe_bpp = min(dsc_max_bpc * 3, limits->pipe.max_bpp);
> -	dsc_min_pipe_bpp = max(dsc_min_bpc * 3, limits->pipe.min_bpp);
> -
> -	return pipe_bpp >= dsc_min_pipe_bpp &&
> -	       pipe_bpp <= dsc_max_pipe_bpp;
> +	return pipe_bpp >= limits->pipe.min_bpp &&
> +	       pipe_bpp <= limits->pipe.max_bpp;
>  }
> 
>  static
> @@ -2195,7 +2185,7 @@ int intel_dp_force_dsc_pipe_bpp(struct intel_dp
> *intel_dp,
> 
>  	forced_bpp = intel_dp->force_dsc_bpc * 3;
> 
> -	if (is_dsc_pipe_bpp_sufficient(i915, limits, forced_bpp)) {
> +	if (is_dsc_pipe_bpp_sufficient(limits, forced_bpp)) {
>  		drm_dbg_kms(&i915->drm, "Input DSC BPC forced to %d\n",
> intel_dp->force_dsc_bpc);
>  		return forced_bpp;
>  	}
> @@ -2212,11 +2202,10 @@ static int
> intel_dp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp,
>  					 struct link_config_limits *limits,
>  					 int timeslots)
>  {
> -	struct intel_display *display = to_intel_display(intel_dp);
>  	const struct intel_connector *connector =
>  		to_intel_connector(conn_state->connector);
> -	int dsc_max_bpc, dsc_max_bpp;
> -	int dsc_min_bpc, dsc_min_bpp;
> +	int dsc_max_bpp;
> +	int dsc_min_bpp;
>  	u8 dsc_bpc[3] = {};
>  	int forced_bpp, pipe_bpp;
>  	int num_bpc, i, ret;
> @@ -2232,14 +2221,8 @@ static int intel_dp_dsc_compute_pipe_bpp(struct
> intel_dp *intel_dp,
>  		}
>  	}
> 
> -	dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(display);
> -	if (!dsc_max_bpc)
> -		return -EINVAL;
> -
> -	dsc_max_bpp = min(dsc_max_bpc * 3, limits->pipe.max_bpp);
> -
> -	dsc_min_bpc = intel_dp_dsc_min_src_input_bpc(display);
> -	dsc_min_bpp = max(dsc_min_bpc * 3, limits->pipe.min_bpp);
> +	dsc_max_bpp = limits->pipe.max_bpp;
> +	dsc_min_bpp = limits->pipe.min_bpp;
> 
>  	/*
>  	 * Get the maximum DSC bpc that will be supported by any valid
> @@ -2284,7 +2267,7 @@ static int intel_edp_dsc_compute_pipe_bpp(struct
> intel_dp *intel_dp,
> 
>  		/* For eDP use max bpp that can be supported with DSC. */
>  		pipe_bpp = intel_dp_dsc_compute_max_bpp(connector,
> max_bpc);
> -		if (!is_dsc_pipe_bpp_sufficient(i915, limits, pipe_bpp)) {
> +		if (!is_dsc_pipe_bpp_sufficient(limits, pipe_bpp)) {
>  			drm_dbg_kms(&i915->drm,
>  				    "Computed BPC is not in DSC BPC
> limits\n");
>  			return -EINVAL;
> @@ -2502,6 +2485,14 @@ intel_dp_compute_config_limits(struct intel_dp
> *intel_dp,
>  	limits->pipe.min_bpp = intel_dp_min_bpp(crtc_state-
> >output_format);
>  	limits->pipe.max_bpp = intel_dp_max_bpp(intel_dp, crtc_state,
> 
> respect_downstream_limits);
> +	if (dsc) {
> +		struct intel_display *display = to_intel_display(intel_dp);
> +		int dsc_min_bpc = intel_dp_dsc_min_src_input_bpc(display);
> +		int dsc_max_bpc =
> intel_dp_dsc_max_src_input_bpc(display);
> +
> +		limits->pipe.max_bpp = min(limits->pipe.max_bpp,
> dsc_max_bpc * 3);
> +		limits->pipe.min_bpp = max(limits->pipe.min_bpp,
> dsc_min_bpc * 3);
> +	}
> 
>  	if (intel_dp->use_max_params) {
>  		/*
> --
> 2.45.2



More information about the Intel-gfx mailing list