[PATCH 6/9] drm/i915/pfit: Check pfit destination window on ILK-BDW
Ville Syrjala
ville.syrjala at linux.intel.com
Wed Oct 16 14:31:31 UTC 2024
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
The ILK-BDW panel fitter has several restrictions on the
destination window size. Check for those and reject the
configuration if things aren't entirely proper.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_panel.c | 55 ++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index 593e41907d53..d66ce8537f7d 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -383,6 +383,57 @@ void intel_panel_add_encoder_fixed_mode(struct intel_connector *connector,
"current (BIOS)");
}
+static int intel_pch_pfit_check_dst_window(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_display *display = to_intel_display(crtc_state);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->hw.adjusted_mode;
+ const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
+ int width = drm_rect_width(dst);
+ int height = drm_rect_height(dst);
+ int x = dst->x1;
+ int y = dst->y1;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE &&
+ (y & 1 || height & 1)) {
+ drm_dbg_kms(display->drm,
+ "[CRTC:%d:%s] pfit window (" DRM_RECT_FMT ") misaligned for interlaced output\n",
+ crtc->base.base.id, crtc->base.name, DRM_RECT_ARG(dst));
+ return -EINVAL;
+ }
+
+ /*
+ * "Restriction : When pipe scaling is enabled, the scaled
+ * output must equal the pipe active area, so Pipe active
+ * size = (2 * PF window position) + PF window size."
+ *
+ * The vertical direction seems more forgiving than the
+ * horizontal direction, but still has some issues so
+ * let's follow the same hard rule for both.
+ */
+ if (adjusted_mode->crtc_hdisplay != 2 * x + width ||
+ adjusted_mode->crtc_vdisplay != 2 * y + height) {
+ drm_dbg_kms(display->drm,
+ "[CRTC:%d:%s] pfit window (" DRM_RECT_FMT ") not centered\n",
+ crtc->base.base.id, crtc->base.name, DRM_RECT_ARG(dst));
+ return -EINVAL;
+ }
+
+ /*
+ * "Restriction : The X position must not be programmed
+ * to be 1 (28:16=0 0000 0000 0001b)."
+ */
+ if (x == 1) {
+ drm_dbg_kms(display->drm,
+ "[CRTC:%d:%s] pfit window (" DRM_RECT_FMT ") badly positioned\n",
+ crtc->base.base.id, crtc->base.name, DRM_RECT_ARG(dst));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int intel_pch_pfit_check_src_size(const struct intel_crtc_state *crtc_state)
{
struct intel_display *display = to_intel_display(crtc_state);
@@ -575,6 +626,10 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
if (DISPLAY_VER(display) >= 9)
return 0;
+ ret = intel_pch_pfit_check_dst_window(crtc_state);
+ if (ret)
+ return ret;
+
ret = intel_pch_pfit_check_src_size(crtc_state);
if (ret)
return ret;
--
2.45.2
More information about the Intel-gfx
mailing list