[PATCH 08/13] drm/i915/dmc_wl: Allow simpler syntax for single reg in range tables
Gustavo Sousa
gustavo.sousa at intel.com
Mon Oct 21 22:27:27 UTC 2024
Allow simpler syntax for defining entries for single registers in range
tables. That makes them easier to type as well as to read, allowing one
to quickly tell whether a range actually refers to a single register or
a "true range".
Signed-off-by: Gustavo Sousa <gustavo.sousa at intel.com>
---
drivers/gpu/drm/i915/display/intel_dmc_wl.c | 118 ++++++++++----------
1 file changed, 60 insertions(+), 58 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dmc_wl.c b/drivers/gpu/drm/i915/display/intel_dmc_wl.c
index 8bf2f32be859..6992ce654e75 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc_wl.c
+++ b/drivers/gpu/drm/i915/display/intel_dmc_wl.c
@@ -54,82 +54,82 @@ static struct intel_dmc_wl_range lnl_wl_range[] = {
};
static struct intel_dmc_wl_range xe3lpd_dc5_dc6_wl_ranges[] = {
- { .start = 0x45500, .end = 0x45500 }, /* DC_STATE_SEL */
+ { .start = 0x45500 }, /* DC_STATE_SEL */
{ .start = 0x457a0, .end = 0x457b0 }, /* DC*_RESIDENCY_COUNTER */
- { .start = 0x45504, .end = 0x45504 }, /* DC_STATE_EN */
+ { .start = 0x45504 }, /* DC_STATE_EN */
{ .start = 0x45400, .end = 0x4540c }, /* PWR_WELL_CTL_* */
- { .start = 0x454f0, .end = 0x454f0 }, /* RETENTION_CTRL */
+ { .start = 0x454f0 }, /* RETENTION_CTRL */
/* DBUF_CTL_* */
- { .start = 0x44300, .end = 0x44300 },
- { .start = 0x44304, .end = 0x44304 },
- { .start = 0x44f00, .end = 0x44f00 },
- { .start = 0x44f04, .end = 0x44f04 },
- { .start = 0x44fe8, .end = 0x44fe8 },
- { .start = 0x45008, .end = 0x45008 },
+ { .start = 0x44300 },
+ { .start = 0x44304 },
+ { .start = 0x44f00 },
+ { .start = 0x44f04 },
+ { .start = 0x44fe8 },
+ { .start = 0x45008 },
- { .start = 0x46070, .end = 0x46070 }, /* CDCLK_PLL_ENABLE */
- { .start = 0x46000, .end = 0x46000 }, /* CDCLK_CTL */
- { .start = 0x46008, .end = 0x46008 }, /* CDCLK_SQUASH_CTL */
+ { .start = 0x46070 }, /* CDCLK_PLL_ENABLE */
+ { .start = 0x46000 }, /* CDCLK_CTL */
+ { .start = 0x46008 }, /* CDCLK_SQUASH_CTL */
/* TRANS_CMTG_CTL_* */
- { .start = 0x6fa88, .end = 0x6fa88 },
- { .start = 0x6fb88, .end = 0x6fb88 },
-
- { .start = 0x46430, .end = 0x46430 }, /* CHICKEN_DCPR_1 */
- { .start = 0x46434, .end = 0x46434 }, /* CHICKEN_DCPR_2 */
- { .start = 0x454a0, .end = 0x454a0 }, /* CHICKEN_DCPR_4 */
- { .start = 0x42084, .end = 0x42084 }, /* CHICKEN_MISC_2 */
- { .start = 0x42088, .end = 0x42088 }, /* CHICKEN_MISC_3 */
- { .start = 0x46160, .end = 0x46160 }, /* CMTG_CLK_SEL */
+ { .start = 0x6fa88 },
+ { .start = 0x6fb88 },
+
+ { .start = 0x46430 }, /* CHICKEN_DCPR_1 */
+ { .start = 0x46434 }, /* CHICKEN_DCPR_2 */
+ { .start = 0x454a0 }, /* CHICKEN_DCPR_4 */
+ { .start = 0x42084 }, /* CHICKEN_MISC_2 */
+ { .start = 0x42088 }, /* CHICKEN_MISC_3 */
+ { .start = 0x46160 }, /* CMTG_CLK_SEL */
{ .start = 0x8f000, .end = 0x8ffff }, /* Main DMC registers */
{},
};
static struct intel_dmc_wl_range xe3lpd_dc3co_wl_ranges[] = {
- { .start = 0x454a0, .end = 0x454a0 }, /* CHICKEN_DCPR_4 */
+ { .start = 0x454a0 }, /* CHICKEN_DCPR_4 */
- { .start = 0x45504, .end = 0x45504 }, /* DC_STATE_EN */
+ { .start = 0x45504 }, /* DC_STATE_EN */
/* DBUF_CTL_* */
- { .start = 0x44300, .end = 0x44300 },
- { .start = 0x44304, .end = 0x44304 },
- { .start = 0x44f00, .end = 0x44f00 },
- { .start = 0x44f04, .end = 0x44f04 },
- { .start = 0x44fe8, .end = 0x44fe8 },
- { .start = 0x45008, .end = 0x45008 },
-
- { .start = 0x46070, .end = 0x46070 }, /* CDCLK_PLL_ENABLE */
- { .start = 0x46000, .end = 0x46000 }, /* CDCLK_CTL */
- { .start = 0x46008, .end = 0x46008 }, /* CDCLK_SQUASH_CTL */
+ { .start = 0x44300 },
+ { .start = 0x44304 },
+ { .start = 0x44f00 },
+ { .start = 0x44f04 },
+ { .start = 0x44fe8 },
+ { .start = 0x45008 },
+
+ { .start = 0x46070 }, /* CDCLK_PLL_ENABLE */
+ { .start = 0x46000 }, /* CDCLK_CTL */
+ { .start = 0x46008 }, /* CDCLK_SQUASH_CTL */
{ .start = 0x8f000, .end = 0x8ffff }, /* Main DMC registers */
/* Scanline registers */
- { .start = 0x70000, .end = 0x70000 },
- { .start = 0x70004, .end = 0x70004 },
- { .start = 0x70014, .end = 0x70014 },
- { .start = 0x70018, .end = 0x70018 },
- { .start = 0x71000, .end = 0x71000 },
- { .start = 0x71004, .end = 0x71004 },
- { .start = 0x71014, .end = 0x71014 },
- { .start = 0x71018, .end = 0x71018 },
- { .start = 0x72000, .end = 0x72000 },
- { .start = 0x72004, .end = 0x72004 },
- { .start = 0x72014, .end = 0x72014 },
- { .start = 0x72018, .end = 0x72018 },
- { .start = 0x73000, .end = 0x73000 },
- { .start = 0x73004, .end = 0x73004 },
- { .start = 0x73014, .end = 0x73014 },
- { .start = 0x73018, .end = 0x73018 },
- { .start = 0x7b000, .end = 0x7b000 },
- { .start = 0x7b004, .end = 0x7b004 },
- { .start = 0x7b014, .end = 0x7b014 },
- { .start = 0x7b018, .end = 0x7b018 },
- { .start = 0x7c000, .end = 0x7c000 },
- { .start = 0x7c004, .end = 0x7c004 },
- { .start = 0x7c014, .end = 0x7c014 },
- { .start = 0x7c018, .end = 0x7c018 },
+ { .start = 0x70000 },
+ { .start = 0x70004 },
+ { .start = 0x70014 },
+ { .start = 0x70018 },
+ { .start = 0x71000 },
+ { .start = 0x71004 },
+ { .start = 0x71014 },
+ { .start = 0x71018 },
+ { .start = 0x72000 },
+ { .start = 0x72004 },
+ { .start = 0x72014 },
+ { .start = 0x72018 },
+ { .start = 0x73000 },
+ { .start = 0x73004 },
+ { .start = 0x73014 },
+ { .start = 0x73018 },
+ { .start = 0x7b000 },
+ { .start = 0x7b004 },
+ { .start = 0x7b014 },
+ { .start = 0x7b018 },
+ { .start = 0x7c000 },
+ { .start = 0x7c004 },
+ { .start = 0x7c014 },
+ { .start = 0x7c018 },
{},
};
@@ -181,7 +181,9 @@ static bool intel_dmc_wl_addr_in_range(u32 address,
const struct intel_dmc_wl_range ranges[])
{
for (int i = 0; ranges[i].start; i++) {
- if (ranges[i].start <= address && address <= ranges[i].end)
+ u32 end = ranges[i].end ?: ranges[i].start;
+
+ if (ranges[i].start <= address && address <= end)
return true;
}
--
2.47.0
More information about the Intel-gfx
mailing list