[PATCH 1/9] drm/i915/pfit: Check pipe source size against pfit limits on ILK-BDW

[Jani Nikula]

On Wed, 16 Oct 2024, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> The ILK-BDW panel fitter imposes extra limits on the maximum
> pipe source size we can use. Check for that.
>
> Only HSW/BDW are really affected by this since on older platforms
> the max hdisplay/vdisplay matches the max PIPESRC. But we'll
> put in the limits for all the platforms just to keep things
> clear.
>
> Note that pch_panel_fitting() is also used on SKL+, but we'll
> skip the checks for those as it's all supposed to be handled
> in the unified scaler code.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Looks sensible, but I'm just not going to dig through all the old specs
to verify all of this, and I don't expect anyone else to do it
either. I'll take your word for it, and I trust you to fix any fallout
as well.

With that,

Acked-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_panel.c | 52 +++++++++++++++++++++-
>  1 file changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
> index 71454ddef20f..b77017144818 100644
> --- a/drivers/gpu/drm/i915/display/intel_panel.c
> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
> @@ -383,15 +383,54 @@ void intel_panel_add_encoder_fixed_mode(struct intel_connector *connector,
>  				   "current (BIOS)");
>  }
>  
> +static int intel_pch_pfit_check_src_size(const struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_display *display = to_intel_display(crtc_state);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	int pipe_src_w = drm_rect_width(&crtc_state->pipe_src);
> +	int pipe_src_h = drm_rect_height(&crtc_state->pipe_src);
> +	int max_src_w, max_src_h;
> +
> +	if (DISPLAY_VER(display) >= 8) {
> +		max_src_w = 4096;
> +		max_src_h = 4096;
> +	} else if (DISPLAY_VER(display) >= 7) {
> +		/*
> +		 * PF0 7x5 capable
> +		 * PF1 3x3 capable (could be switched to 7x5
> +		 *                  mode on HSW when PF2 unused)
> +		 * PF2 3x3 capable
> +		 *
> +		 * This assumes we use a 1:1 mapping between pipe and PF.
> +		 */
> +		max_src_w = crtc->pipe == PIPE_A ? 4096 : 2048;
> +		max_src_h = 4096;
> +	} else {
> +		max_src_w = 4096;
> +		max_src_h = 4096;
> +	}
> +
> +	if (pipe_src_w > max_src_w || pipe_src_h > max_src_h) {
> +		drm_dbg_kms(display->drm,
> +			    "[CRTC:%d:%s] source size (%dx%d) exceeds pfit max (%dx%d)\n",
> +			    crtc->base.base.id, crtc->base.name,
> +			    pipe_src_w, pipe_src_h, max_src_w, max_src_h);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>  /* adjusted_mode has been preset to be the panel's fixed mode */
>  static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
>  			     const struct drm_connector_state *conn_state)
>  {
> +	struct intel_display *display = to_intel_display(crtc_state);
>  	const struct drm_display_mode *adjusted_mode =
>  		&crtc_state->hw.adjusted_mode;
>  	int pipe_src_w = drm_rect_width(&crtc_state->pipe_src);
>  	int pipe_src_h = drm_rect_height(&crtc_state->pipe_src);
> -	int x, y, width, height;
> +	int ret, x, y, width, height;
>  
>  	/* Native modes don't need fitting */
>  	if (adjusted_mode->crtc_hdisplay == pipe_src_w &&
> @@ -453,6 +492,17 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
>  		      x, y, width, height);
>  	crtc_state->pch_pfit.enabled = true;
>  
> +	/*
> +	 * SKL+ have unified scalers for pipes/planes so the
> +	 * checks are done in a single place for all scalers.
> +	 */
> +	if (DISPLAY_VER(display) >= 9)
> +		return 0;
> +
> +	ret = intel_pch_pfit_check_src_size(crtc_state);
> +	if (ret)
> +		return ret;
> +
>  	return 0;
>  }

-- 
Jani Nikula, Intel