[PATCH] drm/i915/xe3lpd: Disable HDCP Line Rekeying for Xe3

[Kandpal, Suraj]

> -----Original Message-----
> From: Pottumuttu, Sai Teja <sai.teja.pottumuttu at intel.com>
> Sent: Tuesday, October 29, 2024 2:13 PM
> To: Kandpal, Suraj <suraj.kandpal at intel.com>; intel-xe at lists.freedesktop.org;
> intel-gfx at lists.freedesktop.org
> Subject: Re: [PATCH] drm/i915/xe3lpd: Disable HDCP Line Rekeying for Xe3
> 
> 
> On 29-10-2024 10:56, Suraj Kandpal wrote:
> > We need to disable HDCP Line Rekeying for Xe3 when we are using an
> > HDMI encoder. Also remove the Wa comment tag as this follows the bspec
> > and does not implement the wa.
> >
> > v2: add additional definition instead of function, commit message typo
> > fix and update.
> > v3: restore lost conditional from v2.
> > v4: subject line and subject message updated, fix the if ladder order,
> > fix the bit definition order.
> > v5: Add the bspec link and remove the Wa comment tag
> >
> > Bspec: 69964
> I don't think we still address the why? part. The register and bit doesn't give
> any explanation about disabling line rekeying on xe3 right?

Yes it does have a look at the bit definition where it asks us to disable hdcp line rekeying for hdcp2 and above for HDMI transcoder.
Also please add new lines before and after your comment otherwise it ends up getting overlooked

Regards,
Suraj Kandpal

> > Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> > ---
> >   drivers/gpu/drm/i915/display/intel_hdcp.c | 11 +++++++----
> >   drivers/gpu/drm/i915/i915_reg.h           |  1 +
> >   2 files changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > index ed6aa87403e2..7a32bfef8d87 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > @@ -31,7 +31,6 @@
> >   #define KEY_LOAD_TRIES	5
> >   #define HDCP2_LC_RETRY_CNT			3
> >
> > -/* WA: 16022217614 */
> Probably instead of removing it we can add the lineage of the workaround
> (Wa_16021352814) somewhere inside the function so that we know why are
> we disabling line rekeying for those specific ip versions and steppings.
> >   static void
> >   intel_hdcp_disable_hdcp_line_rekeying(struct intel_encoder *encoder,
> >   				      struct intel_hdcp *hdcp)
> > @@ -43,14 +42,18 @@ intel_hdcp_disable_hdcp_line_rekeying(struct
> intel_encoder *encoder,
> >   		return;
> >
> >   	if (DISPLAY_VER(display) >= 14) {
> 
> Not related to this patch but probably we can remove the above if right?
> The internal if else ladder would take care of everything.
> 
> Thank You
> Sai Teja
> 
> > -		if (IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_D0,
> STEP_FOREVER))
> > -			intel_de_rmw(display, MTL_CHICKEN_TRANS(hdcp-
> >cpu_transcoder),
> > -				     0, HDCP_LINE_REKEY_DISABLE);
> > +		if (DISPLAY_VER(display) >= 30)
> > +			intel_de_rmw(display,
> > +				     TRANS_DDI_FUNC_CTL(display, hdcp-
> >cpu_transcoder),
> > +				     0,
> XE3_TRANS_DDI_HDCP_LINE_REKEY_DISABLE);
> >   		else if (IS_DISPLAY_VER_STEP(display, IP_VER(14, 1), STEP_B0,
> STEP_FOREVER) ||
> >   			 IS_DISPLAY_VER_STEP(display, IP_VER(20, 0),
> STEP_B0, STEP_FOREVER))
> >   			intel_de_rmw(display,
> >   				     TRANS_DDI_FUNC_CTL(display, hdcp-
> >cpu_transcoder),
> >   				     0,
> TRANS_DDI_HDCP_LINE_REKEY_DISABLE);
> > +		else if (IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_D0,
> STEP_FOREVER))
> > +			intel_de_rmw(display, MTL_CHICKEN_TRANS(hdcp-
> >cpu_transcoder),
> > +				     0, HDCP_LINE_REKEY_DISABLE);
> >   	}
> >   }
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h index 405f409e9761..184420011a88
> > 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -3816,6 +3816,7 @@ enum skl_power_gate {
> >   #define  TRANS_DDI_PVSYNC		(1 << 17)
> >   #define  TRANS_DDI_PHSYNC		(1 << 16)
> >   #define  TRANS_DDI_PORT_SYNC_ENABLE	REG_BIT(15)
> > +#define  XE3_TRANS_DDI_HDCP_LINE_REKEY_DISABLE	REG_BIT(15)
> >   #define  TRANS_DDI_EDP_INPUT_MASK	(7 << 12)
> >   #define  TRANS_DDI_EDP_INPUT_A_ON	(0 << 12)
> >   #define  TRANS_DDI_EDP_INPUT_A_ONOFF	(4 << 12)