[PATCH v3] drm/i915/xe3lpd: Power request asserting/deasserting
Mika Kahola
mika.kahola at intel.com
Tue Oct 29 14:00:37 UTC 2024
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Gustavo)
Signed-off-by: Mika Kahola <mika.kahola at intel.com>
---
.../gpu/drm/i915/display/intel_cx0_phy_regs.h | 8 ++++
drivers/gpu/drm/i915/display/intel_tc.c | 39 +++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
index ab3ae110b68f..e04cf2e7c054 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
@@ -200,6 +200,14 @@
#define XELPDP_SSC_ENABLE_PLLA REG_BIT(1)
#define XELPDP_SSC_ENABLE_PLLB REG_BIT(0)
+#define TCSS_DISP_MAILBOX_IN_CMD _MMIO(0x161300)
+#define TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY REG_BIT(31)
+#define TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK REG_GENMASK(7, 0)
+#define TCSS_DISP_MAILBOX_IN_CMD_DATA(val) (TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY | \
+ REG_FIELD_PREP(TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK, val))
+
+#define TCSS_DISP_MAILBOX_IN_DATA _MMIO(0x161304)
+
/* C10 Vendor Registers */
#define PHY_C10_VDR_PLL(idx) (0xC00 + (idx))
#define C10_PLL0_FRACEN REG_BIT8(4)
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index 6f2ee7dbc43b..51e8f7b1b812 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -1013,6 +1013,38 @@ xelpdp_tc_phy_wait_for_tcss_power(struct intel_tc_port *tc, bool enabled)
return true;
}
+static void wa_14020908590(struct intel_display *display,
+ bool enable)
+{
+ bool error = false;
+
+ /* check if mailbox is running busy */
+ if (intel_de_wait_for_clear(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+ drm_dbg_kms(display->drm,
+ "Timeout waiting for TCSS mailbox run/busy bit to clear\n");
+ error = true;
+ goto out;
+ }
+
+ intel_de_write(display, TCSS_DISP_MAILBOX_IN_DATA, enable);
+ intel_de_write(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY |
+ TCSS_DISP_MAILBOX_IN_CMD_DATA(0x1));
+
+ /* wait to clear mailbox running busy bit before continuing */
+ if (intel_de_wait_for_clear(display, TCSS_DISP_MAILBOX_IN_CMD,
+ TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+ drm_dbg_kms(display->drm,
+ "Timeout after writing data to mailbox. Mailbox run/busy bit did not clear\n");
+ error = true;
+ goto out;
+ }
+
+out:
+ drm_WARN_ON(display->drm, error);
+}
+
static void __xelpdp_tc_phy_enable_tcss_power(struct intel_tc_port *tc, bool enable)
{
struct drm_i915_private *i915 = tc_to_i915(tc);
@@ -1022,6 +1054,13 @@ static void __xelpdp_tc_phy_enable_tcss_power(struct intel_tc_port *tc, bool ena
assert_tc_cold_blocked(tc);
+ /*
+ * Gfx driver WA 14020908590 for PTL tcss_rxdetect_clkswb_req/ack
+ * handshake violation when pwwreq= 0->1 during TC7/10 entry
+ */
+ if (DISPLAY_VER(i915) == 30)
+ wa_14020908590(&i915->display, enable);
+
val = intel_de_read(i915, reg);
if (enable)
val |= XELPDP_TCSS_POWER_REQUEST;
--
2.43.0
More information about the Intel-gfx
mailing list