[PATCH v2 3/5] drm/i915/dp_mst: Add a way to disable the DP2 config

[Jani Nikula]

On Wed, 30 Oct 2024, Imre Deak <imre.deak at intel.com> wrote:
> Add a way to disable the DP2 configuration, required by the next patch
> during transcoder disabling.
>
> While at it drop the redundant encoder parameter.
>
> v2:
> - Keep intel_ddi_config_transcoder_dp2() static. (Jani)
> - Remove the encoder parameter.
>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 069cca4b38b2e..dcd43087fa7ed 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -455,14 +455,18 @@ static u32 bdw_trans_port_sync_master_select(enum transcoder master_transcoder)
>  }
>  
>  static void
> -intel_ddi_config_transcoder_dp2(struct intel_encoder *encoder,
> -				const struct intel_crtc_state *crtc_state)
> +intel_ddi_config_transcoder_dp2(const struct intel_crtc_state *crtc_state,
> +				bool enable)
>  {
> -	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> +	struct intel_display *display = to_intel_display(crtc_state);
> +	struct drm_i915_private *i915 = to_i915(display->drm);

You don't need i915 for anything here, might as well change them all.

BR,
Jani.

>  	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>  	u32 val = 0;
>  
> -	if (intel_dp_is_uhbr(crtc_state))
> +	if (!HAS_DP20(i915))
> +		return;
> +
> +	if (enable && intel_dp_is_uhbr(crtc_state))
>  		val = TRANS_DP2_128B132B_CHANNEL_CODING;
>  
>  	intel_de_write(i915, TRANS_DP2_CTL(cpu_transcoder), val);
> @@ -2549,7 +2553,7 @@ static void mtl_ddi_pre_enable_dp(struct intel_atomic_state *state,
>  	/*
>  	 * 6.b If DP v2.0/128b mode - Configure TRANS_DP2_CTL register settings.
>  	 */
> -	intel_ddi_config_transcoder_dp2(encoder, crtc_state);
> +	intel_ddi_config_transcoder_dp2(crtc_state, true);
>  
>  	/*
>  	 * 6.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
> @@ -2686,8 +2690,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
>  	 */
>  	intel_ddi_enable_transcoder_clock(encoder, crtc_state);
>  
> -	if (HAS_DP20(dev_priv))
> -		intel_ddi_config_transcoder_dp2(encoder, crtc_state);
> +	intel_ddi_config_transcoder_dp2(crtc_state, true);
>  
>  	/*
>  	 * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST

-- 
Jani Nikula, Intel