[PATCH RFC 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
Abel Vesa
abel.vesa at linaro.org
Thu Oct 31 15:12:45 UTC 2024
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between this two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
Add a generic helper that allows switching between these modes.
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
drivers/gpu/drm/display/drm_dp_helper.c | 17 +++++++++++++++++
include/drm/display/drm_dp_helper.h | 1 +
2 files changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index 6ee51003de3ce616c3a52653c2f1979ad7658e21..38d612345986ad54b42228902ea718a089d169c4 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -2694,6 +2694,23 @@ int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE])
}
EXPORT_SYMBOL(drm_dp_lttpr_max_link_rate);
+/**
+ * drm_dp_lttpr_set_transparent_mode - set the LTTPR in transparent mode
+ * @aux: DisplayPort AUX channel
+ * @enable: Enable or disable transparent mode
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+
+int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable)
+{
+ u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT :
+ DP_PHY_REPEATER_MODE_NON_TRANSPARENT;
+
+ return drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE, val);
+}
+EXPORT_SYMBOL(drm_dp_lttpr_set_transparent_mode);
+
/**
* drm_dp_lttpr_max_lane_count - get the maximum lane count supported by all LTTPRs
* @caps: LTTPR common capabilities
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index 279624833ea9259809428162f4e845654359f8c9..8821ab2d36b0e04d38ccbdddcb703b34de7ed680 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -625,6 +625,7 @@ int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux,
u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]);
int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
+int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable);
int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
--
2.34.1
More information about the Intel-gfx
mailing list