[PATCH 06/14] drm/i915: Split current joiner hw state readout
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Sep 6 15:29:47 UTC 2024
On Fri, Sep 06, 2024 at 06:27:59PM +0530, Ankit Nautiyal wrote:
> From: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
>
> We need to add a new sanity checks and also do
> some preparations for adding ultrajoiner hw state readout.
> Lets first split reading of the uncompressed joiner and bigjoiner
> bit masks into separate functions.
>
> v2: Fixed checkpatch warnings (Ankit)
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> Reviewed-by: Suraj Kandpal <suraj.kandpal at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 65 +++++++++++++++-----
> 1 file changed, 48 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 3278debf47cc..cdc7531311fc 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3580,51 +3580,82 @@ static bool transcoder_ddi_func_is_enabled(struct drm_i915_private *dev_priv,
> return tmp & TRANS_DDI_FUNC_ENABLE;
> }
>
> -static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> - u8 *primary_pipes, u8 *secondary_pipes)
> +static void enabled_uncompressed_joiner_pipes(struct drm_i915_private *dev_priv,
> + u8 *primary_pipes, u8 *secondary_pipes)
> {
> struct intel_crtc *crtc;
>
> *primary_pipes = 0;
> *secondary_pipes = 0;
>
> + if (DISPLAY_VER(dev_priv) < 13)
> + return;
> +
> for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc,
> joiner_pipes(dev_priv)) {
> enum intel_display_power_domain power_domain;
> enum pipe pipe = crtc->pipe;
> intel_wakeref_t wakeref;
>
> - power_domain = intel_dsc_power_domain(crtc, (enum transcoder) pipe);
> + power_domain = POWER_DOMAIN_PIPE(pipe);
> with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) {
> u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe));
>
> - if (!(tmp & BIG_JOINER_ENABLE))
> - continue;
> -
> - if (tmp & PRIMARY_BIG_JOINER_ENABLE)
> + if (tmp & UNCOMPRESSED_JOINER_PRIMARY)
> *primary_pipes |= BIT(pipe);
> - else
> + if (tmp & UNCOMPRESSED_JOINER_SECONDARY)
> *secondary_pipes |= BIT(pipe);
> }
> + }
> +}
>
> - if (DISPLAY_VER(dev_priv) < 13)
> - continue;
> +static void enabled_bigjoiner_pipes(struct drm_i915_private *dev_priv,
> + u8 *primary_pipes, u8 *secondary_pipes)
> +{
> + struct intel_crtc *crtc;
>
> - power_domain = POWER_DOMAIN_PIPE(pipe);
> + *primary_pipes = 0;
> + *secondary_pipes = 0;
We seem to be missing any kind of check to make sure bigjoiner
is actually present in the hardware. Or am I just blind?
If that is the case we need to fix it up before the
refactoring goes in.
> +
> + for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc,
> + joiner_pipes(dev_priv)) {
> + enum intel_display_power_domain power_domain;
> + enum pipe pipe = crtc->pipe;
> + intel_wakeref_t wakeref;
> +
> + power_domain = intel_dsc_power_domain(crtc, (enum transcoder)pipe);
> with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) {
> u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe));
>
> - if (tmp & UNCOMPRESSED_JOINER_PRIMARY)
> + if (!(tmp & BIG_JOINER_ENABLE))
> + continue;
> +
> + if (tmp & PRIMARY_BIG_JOINER_ENABLE)
> *primary_pipes |= BIT(pipe);
> - if (tmp & UNCOMPRESSED_JOINER_SECONDARY)
> + else
> *secondary_pipes |= BIT(pipe);
> }
> }
> +}
> +
> +static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> + u8 *primary_pipes, u8 *secondary_pipes)
> +{
> + u8 primary_uncompressed_joiner_pipes, primary_bigjoiner_pipes;
> + u8 secondary_uncompressed_joiner_pipes, secondary_bigjoiner_pipes;
> +
> + enabled_uncompressed_joiner_pipes(dev_priv, &primary_uncompressed_joiner_pipes,
> + &secondary_uncompressed_joiner_pipes);
> +
> + enabled_bigjoiner_pipes(dev_priv, &primary_bigjoiner_pipes,
> + &secondary_bigjoiner_pipes);
> +
> + *primary_pipes = 0;
> + *secondary_pipes = 0;
These seem redundant.
> +
> + *primary_pipes = primary_uncompressed_joiner_pipes | primary_bigjoiner_pipes;
>
> - /* Joiner pipes should always be consecutive primary and secondary */
> - drm_WARN(&dev_priv->drm, *secondary_pipes != *primary_pipes << 1,
> - "Joiner misconfigured (primary pipes 0x%x, secondary pipes 0x%x)\n",
> - *primary_pipes, *secondary_pipes);
Where did this go?
> + *secondary_pipes = secondary_uncompressed_joiner_pipes | secondary_bigjoiner_pipes;
> }
>
> static enum pipe get_joiner_primary_pipe(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes)
> --
> 2.45.2
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list