[PATCH 1/3] drm/i915/dp: use fsleep instead of usleep_rage for LT

[Arun R Murthy]

Aux RD Interval value depends on the value read from the dpcd register
which is updated from the sink device use flseep thereby we adhere to
the Documentation/timers/timers-howto.rst

Signed-off-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v at intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_link_training.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index 397cc4ebae52..f41b69840ad9 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -898,7 +898,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp,
 
 	voltage_tries = 1;
 	for (cr_tries = 0; cr_tries < max_cr_tries; ++cr_tries) {
-		usleep_range(delay_us, 2 * delay_us);
+		fsleep(delay_us);
 
 		if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
 						     link_status) < 0) {
@@ -1040,7 +1040,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp,
 	}
 
 	for (tries = 0; tries < 5; tries++) {
-		usleep_range(delay_us, 2 * delay_us);
+		fsleep(delay_us);
 
 		if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy,
 						     link_status) < 0) {
@@ -1417,7 +1417,7 @@ intel_dp_128b132b_lane_eq(struct intel_dp *intel_dp,
 	deadline = jiffies + msecs_to_jiffies_timeout(400);
 
 	for (try = 0; try < max_tries; try++) {
-		usleep_range(delay_us, 2 * delay_us);
+		fsleep(delay_us);
 
 		/*
 		 * The delay may get updated. The transmitter shall read the
-- 
2.25.1