[PATCH i-g-t 2/2] tests/xe_pmu: Add frequency test
Belgaumkar, Vinay
vinay.belgaumkar at intel.com
Fri Apr 11 22:36:37 UTC 2025
On 4/11/2025 12:33 AM, Riana Tauro wrote:
> Hi Vinay
>
> On 4/10/2025 7:03 AM, Vinay Belgaumkar wrote:
>> Add a basic test that uses PMU to read GT actual and requested
>> frequencies while running a workload.
>>
>> v2: Rebase and comments (Riana)
>> v3: Address review comments (Kamil and Riana)
>>
>> Cc: Lucas De Marchi <lucas.demarchi at intel.com>
>> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
>> Cc: Riana Tauro <riana.tauro at intel.com>
>> Cc: Kamil Konieczny <kamil.konieczny at linux.intel.com>
>> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
>> ---
>> tests/intel/xe_pmu.c | 147 +++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 147 insertions(+)
>>
>> diff --git a/tests/intel/xe_pmu.c b/tests/intel/xe_pmu.c
>> index 175bbf374..589c7cbde 100644
>> --- a/tests/intel/xe_pmu.c
>> +++ b/tests/intel/xe_pmu.c
>> @@ -376,6 +376,94 @@ static void test_gt_c6_idle(int xe, unsigned int
>> gt)
>> close(pmu_fd);
>> }
>> +/**
>> + * SUBTEST: gt-frequency
>> + * Description: Validate we can collect accurate frequency PMU stats
>> + * while running a workload.
>> + */
>> +static void test_gt_frequency(int fd, struct
>> drm_xe_engine_class_instance *eci)
>> +{
>> + struct xe_cork *cork = NULL;
>> + uint64_t end[2], start[2];
>> + unsigned long config_rq_freq, config_act_freq;
>> + double min[2], max[2];
>> + uint32_t gt = eci->gt_id;
>> + uint32_t orig_min = xe_gt_get_freq(fd, eci->gt_id, "min");
>> + uint32_t orig_max = xe_gt_get_freq(fd, eci->gt_id, "max");
>> + uint32_t vm;
>> + int pmu_fd[2];
>> +
>> + config_rq_freq = get_event_config(gt, NULL,
>> "gt-requested-frequency");
>> + pmu_fd[0] = open_group(fd, config_rq_freq, -1);
>> +
>> + config_act_freq = get_event_config(gt, NULL,
>> "gt-actual-frequency");
>> + pmu_fd[1] = open_group(fd, config_act_freq, pmu_fd[0]);
>> +
>> + vm = xe_vm_create(fd, 0, 0);
>> +
>> + cork = xe_cork_create_opts(fd, eci, vm, 1, 1);
>> + xe_cork_sync_start(fd, cork);
>> +
>> + /*
>> + * Set GPU to min frequency and read PMU counters.
>> + */
>> + igt_assert(xe_gt_set_freq(fd, gt, "max", orig_min) > 0);
>> + igt_assert(xe_gt_get_freq(fd, gt, "max") == orig_min);
>> +
>> + pmu_read_multi(pmu_fd[0], 2, start);
>> + usleep(SLEEP_DURATION * USEC_PER_SEC);
>> + pmu_read_multi(pmu_fd[0], 2, end);
>> +
>> + min[0] = (end[0] - start[0]);
>> + min[1] = (end[1] - start[1]);
>> +
>> + /*
>> + * Set GPU to max frequency and read PMU counters.
>> + */
>> + igt_assert(xe_gt_set_freq(fd, gt, "max", orig_max) > 0);
>> + igt_assert(xe_gt_get_freq(fd, gt, "max") == orig_max);
>> + igt_assert(xe_gt_set_freq(fd, gt, "min", orig_max) > 0);
>> + igt_assert(xe_gt_get_freq(fd, gt, "min") == orig_max);
>> +
>> + pmu_read_multi(pmu_fd[0], 2, start);
>> + usleep(SLEEP_DURATION * USEC_PER_SEC);
>> + pmu_read_multi(pmu_fd[0], 2, end);
>> +
>> + max[0] = (end[0] - start[0]);
>> + max[1] = (end[1] - start[1]);
>> +
>> + xe_cork_sync_end(fd, cork);
>> +
>> + /*
>> + * Restore min/max.
>> + */
>> + igt_assert(xe_gt_set_freq(fd, gt, "min", orig_min) > 0);
>> + igt_assert(xe_gt_get_freq(fd, gt, "min") == orig_min);
>> +
>> + igt_info("Minimum frequency: requested %.1f, actual %.1f\n",
>> + min[0], min[1]);
>> + igt_info("Maximum frequency: requested %.1f, actual %.1f\n",
>> + max[0], max[1]);
>> +
>> + close(pmu_fd[0]);
>> + close(pmu_fd[1]);
>> +
>> + if (cork)
>> + xe_cork_destroy(fd, cork);
>> +
>> + xe_vm_destroy(fd, vm);
>> +
>> + close(pmu_fd[0]);
>> + close(pmu_fd[1]);
>> +
>> + assert_within_epsilon(min[0], orig_min, tolerance);
>> + /*
>> + * On thermally throttled devices we cannot be sure maximum
>> frequency
>> + * can be reached so use larger tolerance downwards.
>> + */
>> + assert_within_epsilon_up_down(max[0], orig_max, tolerance, 0.15f);
>> +}
>> +
>> static unsigned int enable_and_provision_vfs(int fd)
>> {
>> unsigned int gt, num_vfs;
>> @@ -427,6 +515,35 @@ static void disable_vfs(int fd)
>> "Failed to restore sriov_drivers_autoprobe value\n");
>> }
>> +static void stash_gt_freq(int fd, uint32_t **stash_min, uint32_t
>> **stash_max)
>> +{
>> + int num_gts, gt;
>> +
>> + num_gts = xe_number_gt(fd);
>> +
>> + *stash_min = (uint32_t *) malloc(sizeof(uint32_t) * num_gts);
>> + *stash_max = (uint32_t *) malloc(sizeof(uint32_t) * num_gts);
>> +
>> + igt_skip_on(*stash_min == NULL || *stash_max == NULL);
>> +
>> + xe_for_each_gt(fd, gt) {
>> + *stash_min[gt] = xe_gt_get_freq(fd, gt, "min");
>> + *stash_max[gt] = xe_gt_get_freq(fd, gt, "max");
>> + }
>> +}
>> +
>> +static void restore_gt_freq(int fd, uint32_t *stash_min, uint32_t
>> *stash_max)
>> +{
>> + int gt;
>> +
>> + xe_for_each_gt(fd, gt) {
>> + xe_gt_set_freq(fd, gt, "max", stash_max[gt]);
>> + xe_gt_set_freq(fd, gt, "min", stash_min[gt]);
>> + }
>> + free(stash_min);
>> + free(stash_max);
>> +}
>> +
>> igt_main
>> {
>> int fd, gt;
>> @@ -482,6 +599,36 @@ igt_main
>> disable_vfs(fd);
>> }
>> + igt_subtest_group {
>> + bool has_freq0_node, needs_freq_restore = false;
>> + uint32_t *stash_min, *stash_max;
>> +
>> + igt_fixture {
>> + has_freq0_node = xe_sysfs_gt_has_node(fd, 0, "freq0");
>> + }
>> +
>> + igt_describe("Validate PMU GT freq measured is within the
>> tolerance");
>> + igt_subtest_with_dynamic("gt-frequency") {
>> + igt_skip_on(!has_freq0_node);
>> + stash_gt_freq(fd, &stash_min, &stash_max);
>> + needs_freq_restore = true;
>> + xe_for_each_gt(fd, gt) {
> Since it's one test, i thought it could be something like this, to
> avoid subtest group
>
> int orig_min = xe_gt_get_freq(fd, gt, "min");
> int orig_max = xe_gt_get_freq(fd, gt, "max");> +
> igt_dynamic_f("gt%u", gt)
>> + xe_for_each_engine(fd, eci) {
>> + if (gt == eci->gt_id) {
>> + test_gt_frequency(fd, eci);
>> + break;
>> + }
>> + }
> xe_gt_set_freq(fd, gt, "max", orig_max);
> xe_gt_set_freq(fd, gt, "min", orig_min);
Didn't have subtest group before before, but fixture was needed to
ensure freq restore happens when the test asserts due to an error. I'd
like to be able to add more subtests at a later date as well, so keeping
as is.
Thanks,
Vinay.
>
> But if there are additional tests planned
> Reviewed-by: Riana Tauro <riana.tauro at intel.com>>
>
>> + }
>> + }
>> +
>> + igt_fixture {
>> + if (needs_freq_restore)
>> + restore_gt_freq(fd, stash_min, stash_max);
>> + }
>> + }
>> +
>> igt_fixture {
>> close(fd);
>> }
>
More information about the Intel-gfx
mailing list