[PATCH] drm/i915/dmc: Add debugfs for dc6 counter

[Gustavo Sousa]

Quoting Imre Deak (2025-02-03 12:14:10-03:00)
>On Mon, Feb 03, 2025 at 11:59:59AM -0300, Gustavo Sousa wrote:
>> Quoting Imre Deak (2025-02-03 11:26:19-03:00)
>> >On Mon, Feb 03, 2025 at 10:39:54AM -0300, Gustavo Sousa wrote:
>> >> Quoting Imre Deak (2025-02-03 09:43:38-03:00)
>> >> >On Mon, Feb 03, 2025 at 02:26:13PM +0530, Mohammed Thasleem wrote:
>> >> >> Starting from MTl we don't have a platform agnostic way to validate DC6 state
>> >> >> due to dc6 counter has been removed to validate DC state.
>> >> >> Adding dc6_entry_counter at display dirver to validate dc6 state.
>> >> >> 
>> >> >> Signed-off-by: Mohammed Thasleem <mohammed.thasleem at intel.com>
>> >> >> ---
>> >> >>  drivers/gpu/drm/i915/display/intel_display_core.h       | 1 +
>> >> >>  drivers/gpu/drm/i915/display/intel_display_power_well.c | 2 ++
>> >> >>  drivers/gpu/drm/i915/display/intel_dmc.c                | 1 +
>> >> >>  3 files changed, 4 insertions(+)
>> >> >> 
>> >> >> diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h
>> >> >> index 554870d2494b..cc244617011f 100644
>> >> >> --- a/drivers/gpu/drm/i915/display/intel_display_core.h
>> >> >> +++ b/drivers/gpu/drm/i915/display/intel_display_core.h
>> >> >> @@ -376,6 +376,7 @@ struct intel_display {
>> >> >>          struct {
>> >> >>                  struct intel_dmc *dmc;
>> >> >>                  intel_wakeref_t wakeref;
>> >> >> +                u32 dc6_entry_counter;
>> >> >>          } dmc;
>> >> >>  
>> >> >>          struct {
>> >> >> diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c b/drivers/gpu/drm/i915/display/intel_display_power_well.c
>> >> >> index f45a4f9ba23c..0eb178aa618d 100644
>> >> >> --- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
>> >> >> +++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
>> >> >> @@ -869,6 +869,8 @@ void skl_enable_dc6(struct intel_display *display)
>> >> >>          intel_dmc_wl_enable(display, DC_STATE_EN_UPTO_DC6);
>> >> >>  
>> >> >>          gen9_set_dc_state(display, DC_STATE_EN_UPTO_DC6);
>> >> >> +
>> >> >> +        display->dmc.dc6_entry_counter++;
>> >> >
>> >> >AFAIU the goal is to validate that the display HW can reach the DC6
>> >> >power state. There is no HW DC6 residency counter (and there wasn't such
>> >> >a counter earlier either), so an alternative way is required. According
>> >> >to the HW team the display driver has programmed everything correctly in
>> >> >order to allow the DC6 power state if the DC5 power state is reached
>> >> >(indicated by the HW DC5 residency counter incrementing) and DC6 is
>> >> >enabled by the driver.
>> >> 
>> >> Yep. That's what I learned as well when looking into this stuff a while
>> >> ago.
>> >> 
>> >> >Based on the above, we'd need a DC6 residency counter maintained by the
>> >> >driver which is incremented if the DC5 residency counter increments
>> 
>> By the way, the counter that we currently have in our driver is the one
>> incremented by the DMC. I was meaning to send a patch for the residency
>> counter maintained by the hardware, but have not yet... In theory, that
>> one should be more accurate, but would require us to enable and disable
>> that counter as the IGT test starts and finishes.
>> 
>> >> >while DC6 is enabled. The dc6_entry_counter in this patch is not enough
>> >> >for this, since it doesn't take into account the DC5 residency. While
>> >> >user space could check both dc6_entry_counter and the DC5 residency,
>> >> >that check would be racy wrt. the driver enabling/disabling the DC6
>> >> >state asynchronously.
>> >> 
>> >> I'm not sure doing a driver-maintained dc6 entry counter would be
>> >> something worth implementing. Even if we have successfully entered DC5
>> >> and, in theory, DC6 would follow if enabled, this would be a synthetic
>> >> counter and it could be masking some hardware bug that could be
>> >> preventing DC6.
>> >
>> >According to the HW team the DC5 residency counter incrementing while
>> >DC6 is enabled is a guarantee that the display is configured correctly
>> >to allow the HW entering DC6 at all times. IOW this is the HW team's
>> >suggestion to validate DC6 at the moment.
>> >
>> >> On the IGT side, we could just skip if we are on a platform that does
>> >> not support DC6 counters, at least while we do not have a reliable
>> >> alternative way of checking for DC6.
>> >
>> >I think IGT would need to validate DC6 in the above way suggested by the
>> >HW team.
>> 
>> I'm still inclined to think that we should defer DC6 checking for when
>> we actually have a way to verify it. The way suggested above sounds
>> like: *trust* that DC6 is reached when DC5 is reached with DC6 enabled.
>> 
>> In that case, just checking for DC5 should be enough for the time
>> being...
>
>That's not the same as DC5 incrementing while DC6 is enabled.

Ah, I see.

You mean that, with DC6 enabled, hardware/firmware flows for DC5 might
be different, right?

Yeah, that would make sense. In that case, maybe a flag (or counter)
from driver that we got into DC5 with DC6 enabled would be helpful
indeed.

--
Gustavo Sousa

>
>> I won't object further if we do the other way though.
>> 
>> >
>> >> It would be good if we could detect that PG0 was in fact disabled, which
>> >> I believe is a stronger indication of DC6.
>> >
>> >It would be good to have a HW DC6 residency counter, but there isn't one
>> >at the moment. Other ways may have a dependency on other, non-display HW
>> >blocks, for instance in case of shared clock/voltage resources, the
>> >display functionality validation shouldn't be affected by these HW
>> >blocks.
>> 
>> As far as I understand by reading the docs, DC6 is DC5 with PG0
>> disabled. That's why my suggestion above.
>> 
>> --
>> Gustavo Sousa
>> 
>> >
>> >> --
>> >> Gustavo Sousa
>> >> 
>> >> >
>> >> >I suppose the driver could take a snapshot of the DC5 residency counter
>> >> >right after it enables DC6 (dc5_residency_start) and increment the SW
>> >> >DC6 residency counter right before it disables DC6 or when user space
>> >> >reads the DC6 counter. So the driver would update the counter at these
>> >> >two points in the following way:
>> >> >dc6_residency += dc5_residency_current - dc5_residency_start
>> >> >
>> >> >The commit log would need a justification, something along the above
>> >> >lines.
>> >> >
>> >> >>  }
>> >> >>  
>> >> >>  void bxt_enable_dc9(struct intel_display *display)
>> >> >> diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c b/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> >> index 221d3abda791..f51bd8e6011d 100644
>> >> >> --- a/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> >> +++ b/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> >> @@ -1293,6 +1293,7 @@ static int intel_dmc_debugfs_status_show(struct seq_file *m, void *unused)
>> >> >>          if (i915_mmio_reg_valid(dc6_reg))
>> >> >>                  seq_printf(m, "DC5 -> DC6 count: %d\n",
>> >> >>                             intel_de_read(display, dc6_reg));
>> >> >> +        seq_printf(m, "DC6 entry count: %d\n", display->dmc.dc6_entry_counter);
>> >> >>  
>> >> >>          seq_printf(m, "program base: 0x%08x\n",
>> >> >>                     intel_de_read(display, DMC_PROGRAM(dmc->dmc_info[DMC_FW_MAIN].start_mmioaddr, 0)));
>> >> >> -- 
>> >> >> 2.43.0
>> >> >>