[PATCH v5 1/6] drm/i915/hpd: Track HPD pins instead of ports for HPD pulse events

[Jani Nikula]

On Tue, 04 Mar 2025, Imre Deak <imre.deak at intel.com> wrote:
> Track the HPD pin instead of the corresponding encoder ports for pending
> short/long HPD pulse events. This is how the pending hotplug events are
> tracked and there is no reason for tracking the pulse events differently.
>
> After this change intel_hpd_trigger_irq() will set the short pulse event
> pending for all encoders using the given HPD pin. This doesn't change
> the behavior, as atm in case of multiple (2) encoders sharing the same
> pin only one will have a pulse handler, so for other encoders without a
> pulse handler the event is ignored. Also setting the pulse event pending
> for all encoders using the HPD pin is what happens after an actual HPD
> IRQ, the effect of calling intel_hpd_trigger_irq() should match this.
>
> In a following change this also makes it simpler to block the handling
> of a short/long pulse event on an HPD pin for all the encoders using
> this HPD pin.
>
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  .../gpu/drm/i915/display/intel_display_core.h |  4 +--
>  drivers/gpu/drm/i915/display/intel_hotplug.c  | 30 +++++++++----------
>  2 files changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h
> index 554870d2494b3..d9952007635e0 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_core.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_core.h
> @@ -169,8 +169,8 @@ struct intel_hotplug {
>  	u32 retry_bits;
>  	struct delayed_work reenable_work;
>  
> -	u32 long_port_mask;
> -	u32 short_port_mask;
> +	u32 long_hpd_pin_mask;
> +	u32 short_hpd_pin_mask;
>  	struct work_struct dig_port_work;
>  
>  	struct work_struct poll_init_work;
> diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
> index 00d7b1ccf1900..9692b5c01aea9 100644
> --- a/drivers/gpu/drm/i915/display/intel_hotplug.c
> +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
> @@ -353,28 +353,28 @@ static void i915_digport_work_func(struct work_struct *work)
>  {
>  	struct drm_i915_private *dev_priv =
>  		container_of(work, struct drm_i915_private, display.hotplug.dig_port_work);
> -	u32 long_port_mask, short_port_mask;
> +	u32 long_hpd_pin_mask, short_hpd_pin_mask;
>  	struct intel_encoder *encoder;
>  	u32 old_bits = 0;
>  
>  	spin_lock_irq(&dev_priv->irq_lock);
> -	long_port_mask = dev_priv->display.hotplug.long_port_mask;
> -	dev_priv->display.hotplug.long_port_mask = 0;
> -	short_port_mask = dev_priv->display.hotplug.short_port_mask;
> -	dev_priv->display.hotplug.short_port_mask = 0;
> +	long_hpd_pin_mask = dev_priv->display.hotplug.long_hpd_pin_mask;
> +	dev_priv->display.hotplug.long_hpd_pin_mask = 0;
> +	short_hpd_pin_mask = dev_priv->display.hotplug.short_hpd_pin_mask;
> +	dev_priv->display.hotplug.short_hpd_pin_mask = 0;
>  	spin_unlock_irq(&dev_priv->irq_lock);
>  
>  	for_each_intel_encoder(&dev_priv->drm, encoder) {
>  		struct intel_digital_port *dig_port;
> -		enum port port = encoder->port;
> +		enum hpd_pin pin = encoder->hpd_pin;
>  		bool long_hpd, short_hpd;
>  		enum irqreturn ret;
>  
>  		if (!intel_encoder_has_hpd_pulse(encoder))
>  			continue;
>  
> -		long_hpd = long_port_mask & BIT(port);
> -		short_hpd = short_port_mask & BIT(port);
> +		long_hpd = long_hpd_pin_mask & BIT(pin);
> +		short_hpd = short_hpd_pin_mask & BIT(pin);
>  
>  		if (!long_hpd && !short_hpd)
>  			continue;
> @@ -384,7 +384,7 @@ static void i915_digport_work_func(struct work_struct *work)
>  		ret = dig_port->hpd_pulse(dig_port, long_hpd);
>  		if (ret == IRQ_NONE) {
>  			/* fall back to old school hpd */
> -			old_bits |= BIT(encoder->hpd_pin);
> +			old_bits |= BIT(pin);
>  		}
>  	}
>  
> @@ -407,9 +407,10 @@ static void i915_digport_work_func(struct work_struct *work)
>  void intel_hpd_trigger_irq(struct intel_digital_port *dig_port)
>  {
>  	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> +	struct intel_encoder *encoder = &dig_port->base;
>  
>  	spin_lock_irq(&i915->irq_lock);
> -	i915->display.hotplug.short_port_mask |= BIT(dig_port->base.port);
> +	i915->display.hotplug.short_hpd_pin_mask |= BIT(encoder->hpd_pin);
>  	spin_unlock_irq(&i915->irq_lock);
>  
>  	queue_work(i915->display.hotplug.dp_wq, &i915->display.hotplug.dig_port_work);
> @@ -557,7 +558,6 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
>  	 * only the one of them (DP) will have ->hpd_pulse().
>  	 */
>  	for_each_intel_encoder(&dev_priv->drm, encoder) {
> -		enum port port = encoder->port;
>  		bool long_hpd;
>  
>  		pin = encoder->hpd_pin;
> @@ -577,10 +577,10 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
>  
>  		if (long_hpd) {
>  			long_hpd_pulse_mask |= BIT(pin);
> -			dev_priv->display.hotplug.long_port_mask |= BIT(port);
> +			dev_priv->display.hotplug.long_hpd_pin_mask |= BIT(pin);
>  		} else {
>  			short_hpd_pulse_mask |= BIT(pin);
> -			dev_priv->display.hotplug.short_port_mask |= BIT(port);
> +			dev_priv->display.hotplug.short_hpd_pin_mask |= BIT(pin);
>  		}
>  	}
>  
> @@ -920,8 +920,8 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
>  
>  	spin_lock_irq(&dev_priv->irq_lock);
>  
> -	dev_priv->display.hotplug.long_port_mask = 0;
> -	dev_priv->display.hotplug.short_port_mask = 0;
> +	dev_priv->display.hotplug.long_hpd_pin_mask = 0;
> +	dev_priv->display.hotplug.short_hpd_pin_mask = 0;
>  	dev_priv->display.hotplug.event_bits = 0;
>  	dev_priv->display.hotplug.retry_bits = 0;

-- 
Jani Nikula, Intel