[PATCH v6 4/8] drm/i915/lobf: Update lobf if any change in dependent parameters

[Hogander, Jouni]

On Thu, 2025-03-27 at 10:43 +0000, Manna, Animesh wrote:
> 
> 
> > -----Original Message-----
> > From: Hogander, Jouni <jouni.hogander at intel.com>
> > Sent: Monday, March 24, 2025 1:36 PM
> > To: intel-xe at lists.freedesktop.org; Manna, Animesh
> > <animesh.manna at intel.com>; intel-gfx at lists.freedesktop.org
> > Cc: Nikula, Jani <jani.nikula at intel.com>; B, Jeevan
> > <jeevan.b at intel.com>
> > Subject: Re: [PATCH v6 4/8] drm/i915/lobf: Update lobf if any
> > change in
> > dependent parameters
> > 
> > On Thu, 2025-03-20 at 00:45 +0530, Animesh Manna wrote:
> > > For every commit the dependent condition for LOBF is checked and
> > > accordingly update has_lobf flag which will be used to update the
> > > ALPM_CTL register during commit.
> > > 
> > > v1: Initial version.
> > > v2: Avoid reading h/w register without has_lobf check. [Jani]
> > > v3: Update LOBF in post plane update instead of separate
> > > function.
> > > [Jouni]
> > > 
> > > Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_alpm.c | 5 ++++-
> > >  1 file changed, 4 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c
> > > b/drivers/gpu/drm/i915/display/intel_alpm.c
> > > index c2862888466f..5df1253a6b6c 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> > > @@ -378,9 +378,12 @@ void intel_alpm_post_plane_update(struct
> > > intel_atomic_state *state,
> > >  	struct intel_display *display = to_intel_display(state);
> > >  	const struct intel_crtc_state *crtc_state =
> > >  		intel_atomic_get_new_crtc_state(state, crtc);
> > > +	const struct intel_crtc_state *old_crtc_state =
> > > +		intel_atomic_get_old_crtc_state(state, crtc);
> > >  	struct intel_encoder *encoder;
> > > 
> > > -	if (!crtc_state->has_lobf && !crtc_state->has_psr)
> > > +	if (!crtc_state->has_lobf && !crtc_state->has_psr &&
> > > +	    !old_crtc_state->has_lobf)
> > 
> > I don't really understand this change? Where lobf is disabled when
> > has_lobf
> > is false?
> 
> When crtc_state->has_lobf = false and old_crtc_state->has_lobf =
> true,
> then (!crtc_state->has_lobf && !crtc_state->has_psr &&
> !old_crtc_state->has_lobf) = false, so return will not happen.

Ok, I see. How about crtc_state->has_lobf = true and old_crtc_state-
>has_lobf = true. Do you still want to configure it? How about
crtc_state->has_lobf != old_crtc_state->has_lobf?

> Next lnl_alpm_configure() will program other aux-wake/aux-less alpm
> related bits except lobf-enable. Do you see any issue here?

I think it should be. Thank you for the clarification.

BR,

Jouni Högander

> 
> Regards,
> Animesh
> > 
> > BR,
> > 
> > Jouni Högander
> > >  		return;
> > > 
> > >  	for_each_intel_encoder_mask(display->drm, encoder,
>