<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
On 5/27/2021 01:53, Tvrtko Ursulin wrote:<br>
<blockquote type="cite"
cite="mid:018044c0-d238-2060-99a4-a477d225781e@linux.intel.com">
On 26/05/2021 19:45, John Harrison wrote:
<br>
<blockquote type="cite">On 5/26/2021 01:40, Tvrtko Ursulin wrote:
<br>
<blockquote type="cite">On 25/05/2021 18:52, Matthew Brost
wrote:
<br>
<blockquote type="cite">On Tue, May 25, 2021 at 11:16:12AM
+0100, Tvrtko Ursulin wrote:
<br>
<blockquote type="cite">
<br>
On 06/05/2021 20:14, Matthew Brost wrote:
<br>
<blockquote type="cite">From: John Harrison
<a class="moz-txt-link-rfc2396E" href="mailto:John.C.Harrison@Intel.com"><John.C.Harrison@Intel.com></a>
<br>
<br>
The serial number tracking of engines happens at the
backend of
<br>
request submission and was expecting to only be given
physical
<br>
engines. However, in GuC submission mode, the
decomposition of virtual
<br>
to physical engines does not happen in i915. Instead,
requests are
<br>
submitted to their virtual engine mask all the way
through to the
<br>
hardware (i.e. to GuC). This would mean that the heart
beat code
<br>
thinks the physical engines are idle due to the serial
number not
<br>
incrementing.
<br>
<br>
This patch updates the tracking to decompose virtual
engines into
<br>
their physical constituents and tracks the request
against each. This
<br>
is not entirely accurate as the GuC will only be issuing
the request
<br>
to one physical engine. However, it is the best that
i915 can do given
<br>
that it has no knowledge of the GuC's scheduling
decisions.
<br>
</blockquote>
<br>
Commit text sounds a bit defeatist. I think instead of
making up the serial
<br>
counts, which has downsides (could you please document in
the commit what
<br>
they are), we should think how to design things properly.
<br>
<br>
</blockquote>
<br>
IMO, I don't think fixing serial counts is the scope of this
series. We
<br>
should focus on getting GuC submission in not cleaning up
all the crap
<br>
that is in the i915. Let's make a note of this though so we
can revisit
<br>
later.
<br>
</blockquote>
<br>
I will say again - commit message implies it is introducing an
unspecified downside by not fully fixing an also unspecified
issue. It is completely reasonable, and customary even, to ask
for both to be documented in the commit message.
<br>
</blockquote>
Not sure what exactly is 'unspecified'. I thought the commit
message described both the problem (heartbeat not running when
using virtual engines) and the result (heartbeat running on more
engines than strictly necessary). But in greater detail...
<br>
<br>
The serial number tracking is a hack for the heartbeat code to
know whether an engine is busy or idle, and therefore whether it
should be pinged for aliveness. Whenever a submission is made to
an engine, the serial number is incremented. The heartbeat code
keeps a copy of the value. If the value has changed, the engine
is busy and needs to be pinged.
<br>
<br>
This works fine for execlist mode where virtual engine
decomposition is done inside i915. It fails miserably for GuC
mode where the decomposition is done by the hardware. The reason
being that the heartbeat code only looks at physical engines but
the serial count is only incremented on the virtual engine.
Thus, the heartbeat sees everything as idle and does not ping.
<br>
</blockquote>
<br>
So hangcheck does not work. Or it works because GuC does it
anyway. Either way, that's one thing to explicitly state in the
commit message.
<br>
<br>
<blockquote type="cite">This patch decomposes the virtual engines
for the sake of incrementing the serial count on each sub-engine
in order to keep the heartbeat code happy. The downside is that
now the heartbeat sees all sub-engines as busy rather than only
the one the submission actually ends up on. There really isn't
much that can be done about that. The heartbeat code is in i915
not GuC, the scheduler is in GuC not i915. The only way to
improve it is to either move the heartbeat code into GuC as well
and completely disable the i915 side, or add some way for i915
to interrogate GuC as to which engines are or are not active.
Technically, we do have both. GuC has (or at least had) an
option to force a context switch on every execution quantum
pre-emption. However, that is much, much, more heavy weight than
the heartbeat. For the latter, we do (almost) have the engine
usage statistics for PMU and such like. I'm not sure how much
effort it would be to wire that up to the heartbeat code instead
of using the serial count.
<br>
<br>
In short, the serial count is ever so slightly inefficient in
that it causes heartbeat pings on engines which are idle. On the
other hand, it is way more efficient and simpler than the
current alternatives.
<br>
</blockquote>
<br>
And the hack to make hangcheck work creates this inefficiency
where heartbeats are sent to idle engines. Which is probably fine
just needs to be explained.
<br>
<br>
<blockquote type="cite">Does that answer the questions?
<br>
</blockquote>
<br>
With the two points I re-raise clearly explained, possibly even
patch title changed, yeah. I am just wanting for it to be more
easily obvious to patch reader what it is functionally about - not
just what implementation details have been change but why as well.
<br>
<br>
</blockquote>
My understanding is that we don't explain every piece of code in
minute detail in every checkin email that touches it. I thought my
description was already pretty verbose. I've certainly seen way less
informative checkins that apparently made it through review without
issue.<br>
<br>
Regarding the problem statement, I thought this was fairly clear
that the heartbeat was broken for virtual engines:<br>
<blockquote>This would mean that the heart beat code
<br>
thinks the physical engines are idle due to the serial number not
<br>
incrementing.
<br>
</blockquote>
<br>
Regarding the inefficiency about heartbeating all physical engines
in a virtual engine, again, this seems clear to me:<br>
<blockquote>decompose virtual engines into
<br>
their physical constituents and tracks the request against each.
This
<br>
is not entirely accurate as the GuC will only be issuing the
request
<br>
to one physical engine.<br>
</blockquote>
<br>
For the subject, I guess you could say "Track 'heartbeat serial'
counts for virtual engines". However, the serial tracking count is
not explicitly named for heartbeats so it seems inaccurate to rename
it for a checkin email subject.<br>
<br>
If you have a suggestion for better wording then feel free to
propose something.<br>
<br>
John.<br>
<br>
<br>
<blockquote type="cite"
cite="mid:018044c0-d238-2060-99a4-a477d225781e@linux.intel.com">Regards,
<br>
<br>
Tvrtko
<br>
<br>
<blockquote type="cite">John.
<br>
<br>
<br>
<blockquote type="cite">
<br>
If we are abandoning the normal review process someone please
say so I don't waste my time reading it.
<br>
<br>
Regards,
<br>
<br>
Tvrtko
<br>
<br>
<blockquote type="cite">Matt
<br>
<br>
<blockquote type="cite">Regards,
<br>
<br>
Tvrtko
<br>
<br>
<blockquote type="cite">Signed-off-by: John Harrison
<a class="moz-txt-link-rfc2396E" href="mailto:John.C.Harrison@Intel.com"><John.C.Harrison@Intel.com></a>
<br>
Signed-off-by: Matthew Brost
<a class="moz-txt-link-rfc2396E" href="mailto:matthew.brost@intel.com"><matthew.brost@intel.com></a>
<br>
---
<br>
drivers/gpu/drm/i915/gt/intel_engine_types.h | 2
++
<br>
.../gpu/drm/i915/gt/intel_execlists_submission.c | 6
++++++
<br>
drivers/gpu/drm/i915/gt/intel_ring_submission.c | 6
++++++
<br>
drivers/gpu/drm/i915/gt/mock_engine.c | 6
++++++
<br>
.../gpu/drm/i915/gt/uc/intel_guc_submission.c | 16
++++++++++++++++
<br>
drivers/gpu/drm/i915/i915_request.c | 4
+++-
<br>
6 files changed, 39 insertions(+), 1 deletion(-)
<br>
<br>
diff --git
a/drivers/gpu/drm/i915/gt/intel_engine_types.h
b/drivers/gpu/drm/i915/gt/intel_engine_types.h
<br>
index 86302e6d86b2..e2b5cda6dbc4 100644
<br>
--- a/drivers/gpu/drm/i915/gt/intel_engine_types.h
<br>
+++ b/drivers/gpu/drm/i915/gt/intel_engine_types.h
<br>
@@ -389,6 +389,8 @@ struct intel_engine_cs {
<br>
void (*park)(struct intel_engine_cs
*engine);
<br>
void (*unpark)(struct intel_engine_cs
*engine);
<br>
+ void (*bump_serial)(struct intel_engine_cs
*engine);
<br>
+
<br>
void (*set_default_submission)(struct
intel_engine_cs *engine);
<br>
const struct intel_context_ops *cops;
<br>
diff --git
a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
<br>
index ae12d7f19ecd..02880ea5d693 100644
<br>
---
a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
<br>
+++
b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
<br>
@@ -3199,6 +3199,11 @@ static void
execlists_release(struct intel_engine_cs *engine)
<br>
lrc_fini_wa_ctx(engine);
<br>
}
<br>
+static void execlist_bump_serial(struct intel_engine_cs
*engine)
<br>
+{
<br>
+ engine->serial++;
<br>
+}
<br>
+
<br>
static void
<br>
logical_ring_default_vfuncs(struct intel_engine_cs
*engine)
<br>
{
<br>
@@ -3208,6 +3213,7 @@ logical_ring_default_vfuncs(struct
intel_engine_cs *engine)
<br>
engine->cops = &execlists_context_ops;
<br>
engine->request_alloc =
execlists_request_alloc;
<br>
+ engine->bump_serial = execlist_bump_serial;
<br>
engine->reset.prepare =
execlists_reset_prepare;
<br>
engine->reset.rewind = execlists_reset_rewind;
<br>
diff --git
a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
<br>
index 14aa31879a37..39dd7c4ed0a9 100644
<br>
--- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
<br>
+++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
<br>
@@ -1045,6 +1045,11 @@ static void setup_irq(struct
intel_engine_cs *engine)
<br>
}
<br>
}
<br>
+static void ring_bump_serial(struct intel_engine_cs
*engine)
<br>
+{
<br>
+ engine->serial++;
<br>
+}
<br>
+
<br>
static void setup_common(struct intel_engine_cs
*engine)
<br>
{
<br>
struct drm_i915_private *i915 = engine->i915;
<br>
@@ -1064,6 +1069,7 @@ static void setup_common(struct
intel_engine_cs *engine)
<br>
engine->cops = &ring_context_ops;
<br>
engine->request_alloc = ring_request_alloc;
<br>
+ engine->bump_serial = ring_bump_serial;
<br>
/*
<br>
* Using a global execution timeline; the
previous final breadcrumb is
<br>
diff --git a/drivers/gpu/drm/i915/gt/mock_engine.c
b/drivers/gpu/drm/i915/gt/mock_engine.c
<br>
index bd005c1b6fd5..97b10fd60b55 100644
<br>
--- a/drivers/gpu/drm/i915/gt/mock_engine.c
<br>
+++ b/drivers/gpu/drm/i915/gt/mock_engine.c
<br>
@@ -292,6 +292,11 @@ static void
mock_engine_release(struct intel_engine_cs *engine)
<br>
intel_engine_fini_retire(engine);
<br>
}
<br>
+static void mock_bump_serial(struct intel_engine_cs
*engine)
<br>
+{
<br>
+ engine->serial++;
<br>
+}
<br>
+
<br>
struct intel_engine_cs *mock_engine(struct
drm_i915_private *i915,
<br>
const char *name,
<br>
int id)
<br>
@@ -318,6 +323,7 @@ struct intel_engine_cs
*mock_engine(struct drm_i915_private *i915,
<br>
engine->base.cops = &mock_context_ops;
<br>
engine->base.request_alloc =
mock_request_alloc;
<br>
+ engine->base.bump_serial = mock_bump_serial;
<br>
engine->base.emit_flush = mock_emit_flush;
<br>
engine->base.emit_fini_breadcrumb =
mock_emit_breadcrumb;
<br>
engine->base.submit_request =
mock_submit_request;
<br>
diff --git
a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
<br>
index dc79d287c50a..f0e5731bcef6 100644
<br>
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
<br>
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
<br>
@@ -1500,6 +1500,20 @@ static void guc_release(struct
intel_engine_cs *engine)
<br>
lrc_fini_wa_ctx(engine);
<br>
}
<br>
+static void guc_bump_serial(struct intel_engine_cs
*engine)
<br>
+{
<br>
+ engine->serial++;
<br>
+}
<br>
+
<br>
+static void virtual_guc_bump_serial(struct
intel_engine_cs *engine)
<br>
+{
<br>
+ struct intel_engine_cs *e;
<br>
+ intel_engine_mask_t tmp, mask = engine->mask;
<br>
+
<br>
+ for_each_engine_masked(e, engine->gt, mask, tmp)
<br>
+ e->serial++;
<br>
+}
<br>
+
<br>
static void guc_default_vfuncs(struct intel_engine_cs
*engine)
<br>
{
<br>
/* Default vfuncs which can be overridden by each
engine. */
<br>
@@ -1508,6 +1522,7 @@ static void
guc_default_vfuncs(struct intel_engine_cs *engine)
<br>
engine->cops = &guc_context_ops;
<br>
engine->request_alloc = guc_request_alloc;
<br>
+ engine->bump_serial = guc_bump_serial;
<br>
engine->sched_engine->schedule =
i915_schedule;
<br>
@@ -1843,6 +1858,7 @@ guc_create_virtual(struct
intel_engine_cs **siblings, unsigned int count)
<br>
ve->base.cops = &virtual_guc_context_ops;
<br>
ve->base.request_alloc = guc_request_alloc;
<br>
+ ve->base.bump_serial = virtual_guc_bump_serial;
<br>
ve->base.submit_request = guc_submit_request;
<br>
diff --git a/drivers/gpu/drm/i915/i915_request.c
b/drivers/gpu/drm/i915/i915_request.c
<br>
index 9542a5baa45a..127d60b36422 100644
<br>
--- a/drivers/gpu/drm/i915/i915_request.c
<br>
+++ b/drivers/gpu/drm/i915/i915_request.c
<br>
@@ -692,7 +692,9 @@ bool __i915_request_submit(struct
i915_request *request)
<br>
request->ring->vaddr +
request->postfix);
<br>
trace_i915_request_execute(request);
<br>
- engine->serial++;
<br>
+ if (engine->bump_serial)
<br>
+ engine->bump_serial(engine);
<br>
+
<br>
result = true;
<br>
GEM_BUG_ON(test_bit(I915_FENCE_FLAG_ACTIVE,
&request->fence.flags));
<br>
<br>
</blockquote>
</blockquote>
</blockquote>
_______________________________________________
<br>
Intel-gfx mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:Intel-gfx@lists.freedesktop.org">Intel-gfx@lists.freedesktop.org</a>
<br>
<a class="moz-txt-link-freetext" href="https://lists.freedesktop.org/mailman/listinfo/intel-gfx">https://lists.freedesktop.org/mailman/listinfo/intel-gfx</a>
<br>
</blockquote>
<br>
</blockquote>
</blockquote>
<br>
</body>
</html>