volaris@Ubuntu-V8:~$ sudo dmesg [ 0.000000] Linux version 5.15.0-72-generic (buildd@lcy02-amd64-035) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #79-Ubuntu SMP Wed Apr 19 08:22:18 UTC 2023 (Ubuntu 5.15.0-72.79-generic 5.15.98) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.15.0-72-generic root=PARTUUID=3823eb34-02 ro failtobootos= ipv6.disable=1 biosdevname=0 net.ifnames=0 consoleblank=0 rw systemd.show_status=true drm.debug=6 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] signal: max sigframe size: 1440 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007eb79fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007eb7a000-0x000000007ebbbfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ebbc000-0x000000007ecd0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ecd1000-0x000000007ef7bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ef7c000-0x000000007ef7cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ef7d000-0x000000007efbffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007efc0000-0x000000007f56afff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f56b000-0x000000007f6e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f6e3000-0x000000007f6effff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Tiger Hill, BIOS 4.6.5 01/26/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1599.921 MHz processor [ 0.003781] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003798] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003831] last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000 [ 0.003929] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.014719] found SMP MP-table at [mem 0x000fd730-0x000fd73f] [ 0.016119] RAMDISK: [mem 0x2fe73000-0x33f30fff] [ 0.016142] ACPI: Early table checksum verification disabled [ 0.016160] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016179] ACPI: XSDT 0x000000007ECBE070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016206] ACPI: FACP 0x000000007ECC4690 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.016237] ACPI: DSDT 0x000000007ECBE170 00651C (v02 ALASKA A M I 00000002 INTL 20051117) [ 0.016259] ACPI: FACS 0x000000007ECCEF80 000040 [ 0.016277] ACPI: APIC 0x000000007ECC4788 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016298] ACPI: FPDT 0x000000007ECC4800 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016319] ACPI: MCFG 0x000000007ECC4848 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.016339] ACPI: HPET 0x000000007ECC4888 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.016359] ACPI: SSDT 0x000000007ECC48C0 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.016380] ACPI: SSDT 0x000000007ECC4F18 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.016401] ACPI: SSDT 0x000000007ECC5178 00020F (v01 PmRef ApTst 00003000 INTL 20051117) [ 0.016419] ACPI: Reserving FACP table memory at [mem 0x7ecc4690-0x7ecc4783] [ 0.016428] ACPI: Reserving DSDT table memory at [mem 0x7ecbe170-0x7ecc468b] [ 0.016436] ACPI: Reserving FACS table memory at [mem 0x7eccef80-0x7eccefbf] [ 0.016444] ACPI: Reserving APIC table memory at [mem 0x7ecc4788-0x7ecc47f9] [ 0.016452] ACPI: Reserving FPDT table memory at [mem 0x7ecc4800-0x7ecc4843] [ 0.016459] ACPI: Reserving MCFG table memory at [mem 0x7ecc4848-0x7ecc4883] [ 0.016467] ACPI: Reserving HPET table memory at [mem 0x7ecc4888-0x7ecc48bf] [ 0.016475] ACPI: Reserving SSDT table memory at [mem 0x7ecc48c0-0x7ecc4f14] [ 0.016483] ACPI: Reserving SSDT table memory at [mem 0x7ecc4f18-0x7ecc5170] [ 0.016491] ACPI: Reserving SSDT table memory at [mem 0x7ecc5178-0x7ecc5386] [ 0.017152] No NUMA configuration found [ 0.017163] Faking a node at [mem 0x0000000000000000-0x000000007f6effff] [ 0.017225] NODE_DATA(0) allocated [mem 0x7f541000-0x7f56afff] [ 0.018861] Zone ranges: [ 0.018872] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018883] DMA32 [mem 0x0000000001000000-0x000000007f6effff] [ 0.018893] Normal empty [ 0.018901] Device empty [ 0.018908] Movable zone start for each node [ 0.018920] Early memory node ranges [ 0.018925] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.018933] node 0: [mem 0x0000000000100000-0x000000007eb79fff] [ 0.018941] node 0: [mem 0x000000007ef7c000-0x000000007ef7cfff] [ 0.018949] node 0: [mem 0x000000007efc0000-0x000000007f56afff] [ 0.018956] node 0: [mem 0x000000007f6e3000-0x000000007f6effff] [ 0.018965] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff] [ 0.018987] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019134] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.048532] On node 0, zone DMA32: 1026 pages in unavailable ranges [ 0.048636] On node 0, zone DMA32: 67 pages in unavailable ranges [ 0.048682] On node 0, zone DMA32: 376 pages in unavailable ranges [ 0.048900] On node 0, zone DMA32: 2320 pages in unavailable ranges [ 0.049441] ACPI: PM-Timer IO Port: 0x408 [ 0.049518] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.049565] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.049591] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.049604] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.049636] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.049651] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.049681] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.049817] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.049835] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.049845] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.049854] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.049870] PM: hibernation: Registered nosave memory: [mem 0x7eb7a000-0x7ebbbfff] [ 0.049880] PM: hibernation: Registered nosave memory: [mem 0x7ebbc000-0x7ecd0fff] [ 0.049889] PM: hibernation: Registered nosave memory: [mem 0x7ecd1000-0x7ef7bfff] [ 0.049905] PM: hibernation: Registered nosave memory: [mem 0x7ef7d000-0x7efbffff] [ 0.049921] PM: hibernation: Registered nosave memory: [mem 0x7f56b000-0x7f6e2fff] [ 0.049934] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.049943] Booting paravirtualized kernel on bare hardware [ 0.049957] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.050006] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.056660] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288 [ 0.056704] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152 [ 0.056717] pcpu-alloc: [0] 0 1 2 3 [ 0.056885] Built 1 zonelists, mobility grouping on. Total pages: 512087 [ 0.056900] Policy zone: DMA32 [ 0.056907] Kernel command line: BOOT_IMAGE=/vmlinuz-5.15.0-72-generic root=PARTUUID=3823eb34-02 ro failtobootos= ipv6.disable=1 biosdevname=0 net.ifnames=0 consoleblank=0 rw systemd.show_status=true drm.debug=6 [ 0.057436] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.15.0-72-generic failtobootos= biosdevname=0", will be passed to user space. [ 0.059755] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.060939] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.061113] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.115074] Memory: 1932264K/2081604K available (16393K kernel code, 4383K rwdata, 10840K rodata, 3244K init, 6548K bss, 149080K reserved, 0K cma-reserved) [ 0.116471] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.116564] ftrace: allocating 50604 entries in 198 pages [ 0.179608] ftrace: allocated 198 pages with 4 groups [ 0.180195] rcu: Hierarchical RCU implementation. [ 0.180209] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.180216] Rude variant of Tasks RCU enabled. [ 0.180221] Tracing variant of Tasks RCU enabled. [ 0.180227] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.180233] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.203624] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.204299] spurious 8259A interrupt: IRQ7. [ 0.206940] Console: colour VGA+ 80x25 [ 0.215039] printk: console [tty0] enabled [ 0.215205] ACPI: Core revision 20210730 [ 0.215659] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.215789] APIC: Switch to symmetric I/O mode setup [ 0.216495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.235790] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170fda50301, max_idle_ns: 440795251484 ns [ 0.235900] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.84 BogoMIPS (lpj=6399684) [ 0.235997] pid_max: default: 32768 minimum: 301 [ 0.236317] LSM: Security Framework initializing [ 0.236442] landlock: Up and running. [ 0.236507] Yama: becoming mindful. [ 0.236697] AppArmor: AppArmor initialized [ 0.236987] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.237092] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.238458] Disabled fast string operations [ 0.238564] CPU0: Thermal monitoring enabled (TM2) [ 0.238656] process: using mwait in idle threads [ 0.238727] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.238794] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.304901] Freeing SMP alternatives memory: 44K [ 0.413918] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1) [ 0.415084] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver. [ 0.415206] ... version: 3 [ 0.415268] ... bit width: 40 [ 0.415329] ... generic registers: 2 [ 0.415390] ... value mask: 000000ffffffffff [ 0.415453] ... max period: 000000007fffffff [ 0.415517] ... fixed-purpose events: 3 [ 0.415578] ... event mask: 0000000700000003 [ 0.415888] rcu: Hierarchical SRCU implementation. [ 0.416453] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.417019] smp: Bringing up secondary CPUs ... [ 0.417860] x86: Booting SMP configuration: [ 0.417937] .... node #0, CPUs: #1 [ 0.015715] Disabled fast string operations [ 0.428698] #2 [ 0.015715] Disabled fast string operations [ 0.436637] #3 [ 0.015715] Disabled fast string operations [ 0.448088] smp: Brought up 1 node, 4 CPUs [ 0.448160] smpboot: Max logical packages: 1 [ 0.448224] smpboot: Total of 4 processors activated (12799.36 BogoMIPS) [ 0.449524] devtmpfs: initialized [ 0.449524] x86/mm: Memory block size: 128MB [ 0.452607] ACPI: PM: Registering ACPI NVS region [mem 0x7ebbc000-0x7ecd0fff] (1134592 bytes) [ 0.452607] ACPI: PM: Registering ACPI NVS region [mem 0x7ef7d000-0x7efbffff] (274432 bytes) [ 0.452742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.452885] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.453239] pinctrl core: initialized pinctrl subsystem [ 0.453781] PM: RTC time: 15:01:52, date: 2024-01-12 [ 0.454680] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.456420] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.456647] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.456951] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.457132] audit: initializing netlink subsys (disabled) [ 0.457290] audit: type=2000 audit(1705071712.240:1): state=initialized audit_enabled=0 res=1 [ 0.457290] thermal_sys: Registered thermal governor 'fair_share' [ 0.457290] thermal_sys: Registered thermal governor 'bang_bang' [ 0.457290] thermal_sys: Registered thermal governor 'step_wise' [ 0.457290] thermal_sys: Registered thermal governor 'user_space' [ 0.457290] thermal_sys: Registered thermal governor 'power_allocator' [ 0.457290] EISA bus registered [ 0.457290] cpuidle: using governor ladder [ 0.457334] cpuidle: using governor menu [ 0.457754] ACPI: bus type PCI registered [ 0.457825] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.458283] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.460037] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.460176] PCI: Using configuration type 1 for base access [ 0.469102] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.469227] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.479977] ACPI: Added _OSI(Module Device) [ 0.480056] ACPI: Added _OSI(Processor Device) [ 0.480120] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.480184] ACPI: Added _OSI(Processor Aggregator Device) [ 0.480250] ACPI: Added _OSI(Linux-Dell-Video) [ 0.480314] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.480379] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.508392] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.512371] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.513334] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ [ 0.513334] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ [ 0.516366] ACPI: Dynamic OEM Table Load: [ 0.516458] ACPI: SSDT 0xFFFF9F6B4127E400 0002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.519864] ACPI: Dynamic OEM Table Load: [ 0.519994] ACPI: SSDT 0xFFFF9F6B4194D800 0006DB (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.525006] ACPI: Dynamic OEM Table Load: [ 0.525097] ACPI: SSDT 0xFFFF9F6B411AD600 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.527769] ACPI: Dynamic OEM Table Load: [ 0.527853] ACPI: SSDT 0xFFFF9F6B41A48540 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.535328] ACPI: EC: EC started [ 0.535401] ACPI: EC: interrupt blocked [ 0.535648] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.535721] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.535807] ACPI: Interpreter enabled [ 0.535985] ACPI: PM: (supports S0 S1 S3 S4 S5) [ 0.536057] ACPI: Using IOAPIC for interrupt routing [ 0.536294] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.536386] PCI: Using E820 reservations for host bridge windows [ 0.538088] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.576817] ACPI: PM: Power Resource [FN00] [ 0.581277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.581379] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.581760] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) [ 0.583660] PCI host bridge to bus 0000:00 [ 0.583740] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.583813] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.583902] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.583980] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] [ 0.584089] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff window] [ 0.584538] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000 [ 0.585316] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000 [ 0.585404] pci 0000:00:02.0: reg 0x10: [mem 0xdfa00000-0xdfafffff] [ 0.585482] pci 0000:00:02.0: reg 0x14: [io 0xf0f0-0xf0f7] [ 0.585599] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.586411] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.586524] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit] [ 0.586783] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.587545] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.587821] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.588640] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.588921] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.589712] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.589992] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.590770] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.591048] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.591822] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.591991] pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] [ 0.592788] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.592951] pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] [ 0.593712] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.593872] pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] [ 0.594610] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.594768] pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f] [ 0.595532] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.595637] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff] [ 0.595930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.596691] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.597558] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.598462] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.598568] pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.598652] pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3] [ 0.598736] pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7] [ 0.598818] pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3] [ 0.598900] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af] [ 0.598984] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff] [ 0.599132] pci 0000:00:1f.2: PME# supported from D3hot [ 0.599831] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.599993] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.600727] pci 0000:01:00.0: [13a8:8358] type 00 class 0x070002 [ 0.600840] pci 0000:01:00.0: reg 0x10: [mem 0xdfe00000-0xdfe03fff] [ 0.601136] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.612012] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.612097] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.612460] pci 0000:02:00.0: [13a8:0358] type 00 class 0x070002 [ 0.612568] pci 0000:02:00.0: reg 0x10: [mem 0xdfd00000-0xdfd03fff] [ 0.612860] pci 0000:02:00.0: PME# supported from D0 D3hot [ 0.623993] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.624082] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.624446] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 [ 0.624560] pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc7ffff 64bit] [ 0.624704] pci 0000:03:00.0: reg 0x30: [mem 0xdfc80000-0xdfc8ffff pref] [ 0.624917] pci 0000:03:00.0: supports D1 [ 0.624983] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.625458] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.625538] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.625925] pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000 [ 0.626047] pci 0000:04:00.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff] [ 0.626165] pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.626258] pci 0000:04:00.0: reg 0x1c: [mem 0xdfb20000-0xdfb23fff] [ 0.626569] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.627091] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.627168] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.627242] pci 0000:00:1c.3: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.627361] pci_bus 0000:05: extended config space not accessible [ 0.627567] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.627657] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.627748] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.627837] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000fffff window] (subtractive decode) [ 0.627906] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebfffff window] (subtractive decode) [ 0.631389] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.631941] ACPI: PCI: Interrupt link LNKB configured for IRQ 5 [ 0.632426] ACPI: PCI: Interrupt link LNKC configured for IRQ 7 [ 0.632890] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.633346] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.633416] ACPI: PCI: Interrupt link LNKE disabled [ 0.633866] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.633936] ACPI: PCI: Interrupt link LNKF disabled [ 0.634387] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 [ 0.634847] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.636496] ACPI: EC: interrupt unblocked [ 0.636571] ACPI: EC: event unblocked [ 0.636640] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.636705] ACPI: EC: GPE=0x16 [ 0.637827] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.637902] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.638313] iommu: Default domain type: Translated [ 0.638313] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.638313] SCSI subsystem initialized [ 0.639918] libata version 3.00 loaded. [ 0.640015] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.640015] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.640110] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.640179] vgaarb: loaded [ 0.640371] ACPI: bus type USB registered [ 0.640521] usbcore: registered new interface driver usbfs [ 0.640619] usbcore: registered new interface driver hub [ 0.640714] usbcore: registered new device driver usb [ 0.640908] pps_core: LinuxPPS API ver. 1 registered [ 0.640975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.641071] PTP clock support registered [ 0.641205] EDAC MC: Ver: 3.0.0 [ 0.641205] NetLabel: Initializing [ 0.641205] NetLabel: domain hash size = 128 [ 0.641205] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.641205] NetLabel: unlabeled traffic allowed by default [ 0.641205] PCI: Using ACPI for IRQ routing [ 0.658319] PCI: pci_cache_line_size set to 64 bytes [ 0.658444] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.658517] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.658526] e820: reserve RAM buffer [mem 0x7eb7a000-0x7fffffff] [ 0.658532] e820: reserve RAM buffer [mem 0x7ef7d000-0x7fffffff] [ 0.658538] e820: reserve RAM buffer [mem 0x7f56b000-0x7fffffff] [ 0.658543] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff] [ 0.665115] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.665210] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.668066] clocksource: Switched to clocksource tsc-early [ 0.734672] VFS: Disk quotas dquot_6.6.0 [ 0.734849] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.735782] AppArmor: AppArmor Filesystem Enabled [ 0.736091] pnp: PnP ACPI init [ 0.737128] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.737545] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.737628] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.737704] system 00:01: [io 0xffff] has been reserved [ 0.737778] system 00:01: [io 0xffff] has been reserved [ 0.737852] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.737927] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.738001] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.738456] system 00:02: [io 0x06a0-0x06af] has been reserved [ 0.738539] system 00:02: [io 0x06b0-0x06ff] has been reserved [ 0.739191] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.740118] system 00:05: [io 0x0a00-0x0a0f] has been reserved [ 0.742290] system 00:08: [io 0x029c-0x029d] has been reserved [ 0.743963] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.744057] system 00:09: [mem 0x00000000-0x00003fff] could not be reserved [ 0.744137] system 00:09: [mem 0x00000000-0x00000fff] could not be reserved [ 0.744215] system 00:09: [mem 0x00000000-0x00000fff] could not be reserved [ 0.744292] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.746184] system 00:0a: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.746274] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.747908] system 00:0b: [io 0x0400-0x047f] has been reserved [ 0.748000] system 00:0b: [io 0x0500-0x053f] has been reserved [ 0.748079] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.748158] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.748236] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.748314] system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.748392] system 00:0b: [mem 0xffe00000-0xffffffff] has been reserved [ 0.748509] pnp: PnP ACPI: found 12 devices [ 0.762863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.763494] NET: Registered PF_INET protocol family [ 0.763795] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.766210] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.766420] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.766572] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.766935] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.767189] TCP: Hash tables configured (established 16384 bind 16384) [ 0.767803] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 0.768132] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.768364] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.768678] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.768789] NET: Registered PF_XDP protocol family [ 0.768890] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.768986] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.769102] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.769193] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.769293] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.769383] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.769482] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.769604] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffff800000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.769706] clipped [mem size 0x00050000 64bit pref] to [mem size 0x00040000 64bit pref] for e820 entry [mem 0x000e0000-0x000fffff] [ 0.769803] clipped [mem size 0x60200000 64bit pref] to [mem size 0x5fa00000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.769900] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.769990] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffff800000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.770090] clipped [mem size 0x00050000 64bit pref] to [mem size 0x00040000 64bit pref] for e820 entry [mem 0x000e0000-0x000fffff] [ 0.770186] clipped [mem size 0x00800000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.770282] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.770372] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffff800000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.770471] clipped [mem size 0x00050000 64bit pref] to [mem size 0x00040000 64bit pref] for e820 entry [mem 0x000e0000-0x000fffff] [ 0.770567] clipped [mem size 0x00800000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.770663] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.770753] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffff800000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.770852] clipped [mem size 0x00050000 64bit pref] to [mem size 0x00040000 64bit pref] for e820 entry [mem 0x000e0000-0x000fffff] [ 0.770948] clipped [mem size 0x00800000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x7f6f0000-0x7fffffff] [ 0.771045] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 0.771137] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.771210] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.771285] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] [ 0.771374] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.771471] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.771556] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.771632] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.771747] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.771818] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.771894] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.771969] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.772065] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.772134] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.772209] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.772284] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.772380] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.772448] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.772522] pci 0000:00:1c.3: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.772597] pci 0000:00:1c.3: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 0.772694] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.772781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.772853] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.772922] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.772993] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xfebfffff window] [ 0.773071] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.773145] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.773215] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.773301] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.773369] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.773438] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.773524] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.773592] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.773662] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.773748] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.773817] pci_bus 0000:04: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.773887] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 0.773974] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.774044] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.774114] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.774185] pci_bus 0000:05: resource 7 [mem 0x7f800000-0xfebfffff window] [ 0.800010] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x160 took 23119 usecs [ 0.800181] PCI: CLS 64 bytes, default 64 [ 0.800555] Trying to unpack rootfs image as initramfs... [ 0.803540] Initialise system trusted keyrings [ 0.804969] Key type blacklist registered [ 0.807562] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 0.819341] zbud: loaded [ 0.821308] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.822581] fuse: init (API version 7.34) [ 0.823768] integrity: Platform Keyring initialized [ 0.840211] Key type asymmetric registered [ 0.840297] Asymmetric key parser 'x509' registered [ 0.840498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.840826] io scheduler mq-deadline registered [ 0.843772] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.847506] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.847710] ACPI: button: Lid Switch [LID1] [ 0.847927] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.848106] ACPI: button: Sleep Button [SLPB] [ 0.848312] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.848490] ACPI: button: Power Button [PWRB] [ 0.848694] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.849342] ACPI: button: Power Button [PWRF] [ 0.864545] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.864646] ACPI: thermal: Thermal Zone [TZ01] (27 C) [ 0.865793] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.879105] Linux agpgart interface v0.103 [ 0.891495] loop: module loaded [ 0.892478] ata_piix 0000:00:1f.2: version 2.13 [ 0.892745] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.052785] scsi host0: ata_piix [ 1.053615] scsi host1: ata_piix [ 1.053876] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 1.053955] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 1.054987] tun: Universal TUN/TAP device driver, 1.6 [ 1.055277] PPP generic driver version 2.4.2 [ 1.055737] VFIO - User Level meta-driver version: 0.3 [ 1.056180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.056284] ehci-pci: EHCI PCI platform driver [ 1.056767] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.056859] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.056974] ehci-pci 0000:00:1d.7: debug port 1 [ 1.061036] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 1.075736] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.076011] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.076107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.076194] usb usb1: Product: EHCI Host Controller [ 1.076261] usb usb1: Manufacturer: Linux 5.15.0-72-generic ehci_hcd [ 1.076331] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.076986] hub 1-0:1.0: USB hub found [ 1.077085] hub 1-0:1.0: 8 ports detected [ 1.078370] ehci-platform: EHCI generic platform driver [ 1.078502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.078589] ohci-pci: OHCI PCI platform driver [ 1.078695] ohci-platform: OHCI generic platform driver [ 1.078784] uhci_hcd: USB Universal Host Controller Interface driver [ 1.079194] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.079295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.079431] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.079570] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 1.079891] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.079988] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080077] usb usb2: Product: UHCI Host Controller [ 1.080143] usb usb2: Manufacturer: Linux 5.15.0-72-generic uhci_hcd [ 1.080215] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.080884] hub 2-0:1.0: USB hub found [ 1.080984] hub 2-0:1.0: 2 ports detected [ 1.081896] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.081993] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.082095] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.082200] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 1.082507] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.082603] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.082692] usb usb3: Product: UHCI Host Controller [ 1.082760] usb usb3: Manufacturer: Linux 5.15.0-72-generic uhci_hcd [ 1.082830] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.083509] hub 3-0:1.0: USB hub found [ 1.083612] hub 3-0:1.0: 2 ports detected [ 1.084505] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.084622] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.084726] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.084860] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 1.085228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.085325] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.085415] usb usb4: Product: UHCI Host Controller [ 1.085484] usb usb4: Manufacturer: Linux 5.15.0-72-generic uhci_hcd [ 1.085554] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.086236] hub 4-0:1.0: USB hub found [ 1.086340] hub 4-0:1.0: 2 ports detected [ 1.087247] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.087359] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.087477] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.087613] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 1.087988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.088082] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.088168] usb usb5: Product: UHCI Host Controller [ 1.088241] usb usb5: Manufacturer: Linux 5.15.0-72-generic uhci_hcd [ 1.088315] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.088981] hub 5-0:1.0: USB hub found [ 1.089102] hub 5-0:1.0: 2 ports detected [ 1.089953] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.090939] i8042: No controller found [ 1.091546] mousedev: PS/2 mouse device common for all mice [ 1.092369] rtc_cmos 00:03: RTC can wake from S4 [ 1.093165] rtc_cmos 00:03: registered as rtc0 [ 1.093295] rtc_cmos 00:03: setting system clock to 2024-01-12T15:01:53 UTC (1705071713) [ 1.093485] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 1.093601] i2c_dev: i2c /dev entries driver [ 1.095336] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.095601] device-mapper: uevent: version 1.0.3 [ 1.096087] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.096298] platform eisa.0: Probing EISA bus 0 [ 1.096388] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.096469] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.096540] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.096613] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.096687] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.096758] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.096829] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.096901] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.096972] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.097045] platform eisa.0: EISA: Detected 0 cards [ 1.097124] intel_pstate: CPU model not supported [ 1.098042] ledtrig-cpu: registered to indicate activity on CPUs [ 1.098513] drop_monitor: Initializing network drop monitor service [ 1.098796] IPv6: Loaded, but administratively disabled, reboot required to enable [ 1.098905] NET: Registered PF_PACKET protocol family [ 1.099220] Key type dns_resolver registered [ 1.101543] microcode: sig=0x30661, pf=0x8, revision=0x10d [ 1.101920] microcode: Microcode Update Driver: v2.2. [ 1.101938] IPI shorthand broadcast: enabled [ 1.102136] sched_clock: Marking stable (1090176189, 11715381)->(1104389809, -2498239) [ 1.103055] registered taskstats version 1 [ 1.103624] Loading compiled-in X.509 certificates [ 1.109913] Loaded X.509 cert 'Build time autogenerated kernel key: b90c334466bcc11badc67eaa0268e83fd80ac687' [ 1.115774] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.121516] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.121612] blacklist: Loading compiled-in revocation X.509 certificates [ 1.121790] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.121966] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.122143] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.122341] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.122520] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.122704] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.122890] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.123080] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.124226] zswap: loaded using pool lzo/zbud [ 1.127054] Key type .fscrypt registered [ 1.128306] Key type fscrypt-provisioning registered [ 1.228174] ata1.00: ATA-9: StorFly VSFCS2XI016G-150, 0202-000, max UDMA/133 [ 1.228286] ata1.00: 30867456 sectors, multi 2: LBA48 NCQ (depth 0/32) [ 1.229734] ata1.00: Features: Dev-Sleep [ 1.231902] scsi 0:0:0:0: Direct-Access ATA StorFly VSFCS2XI -000 PQ: 0 ANSI: 5 [ 1.233010] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.233388] sd 0:0:0:0: [sda] 30867456 512-byte logical blocks: (15.8 GB/14.7 GiB) [ 1.233564] sd 0:0:0:0: [sda] Write Protect is off [ 1.233641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.233742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.256879] sda: sda1 sda2 sda3 [ 1.276246] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.559941] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 1.755846] usb 2-1: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=54.00 [ 1.755974] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.756052] usb 2-1: Product: USB Optical Mouse [ 1.756121] usb 2-1: Manufacturer: Logitech [ 1.815946] tsc: Refined TSC clocksource calibration: 1599.999 MHz [ 1.816051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns [ 1.816219] clocksource: Switched to clocksource tsc [ 2.375955] usb 2-2: new low-speed USB device number 3 using uhci_hcd [ 2.571844] usb 2-2: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.77 [ 2.571970] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.572048] usb 2-2: Product: Dell QuietKey Keyboard [ 2.572117] usb 2-2: Manufacturer: Dell [ 3.144891] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 3.356883] usb 3-1: string descriptor 0 read error: -22 [ 3.356978] usb 3-1: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.01 [ 3.357092] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.767758] Freeing initrd memory: 66296K [ 3.782581] Key type encrypted registered [ 3.782678] AppArmor: AppArmor sha1 policy hashing enabled [ 3.782780] ima: No TPM chip found, activating TPM-bypass! [ 3.782867] Loading compiled-in module X.509 certificates [ 3.788650] Loaded X.509 cert 'Build time autogenerated kernel key: b90c334466bcc11badc67eaa0268e83fd80ac687' [ 3.788754] ima: Allocated hash algorithm: sha1 [ 3.788834] ima: No architecture policies found [ 3.788966] evm: Initialising EVM extended attributes: [ 3.789032] evm: security.selinux [ 3.789092] evm: security.SMACK64 [ 3.789152] evm: security.SMACK64EXEC [ 3.789212] evm: security.SMACK64TRANSMUTE [ 3.789273] evm: security.SMACK64MMAP [ 3.789333] evm: security.apparmor [ 3.789392] evm: security.ima [ 3.789451] evm: security.capability [ 3.789511] evm: HMAC attrs: 0x1 [ 3.790739] PM: Magic number: 8:422:32 [ 3.794859] RAS: Correctable Errors collector initialized. [ 3.803008] Freeing unused decrypted memory: 2036K [ 3.807182] Freeing unused kernel image (initmem) memory: 3244K [ 3.832019] Write protecting the kernel read-only data: 30720k [ 3.836142] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 3.838510] Freeing unused kernel image (rodata/data gap) memory: 1448K [ 3.840102] usb 1-4: new high-speed USB device number 5 using ehci-pci [ 3.942301] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.942402] Run /init as init process [ 3.942466] with arguments: [ 3.942470] /init [ 3.942474] with environment: [ 3.942477] HOME=/ [ 3.942480] TERM=linux [ 3.942484] BOOT_IMAGE=/vmlinuz-5.15.0-72-generic [ 3.942487] failtobootos= [ 3.942491] biosdevname=0 [ 4.002113] usb 1-4: config 1 has an invalid interface number: 8 but max is 3 [ 4.002203] usb 1-4: config 1 has no interface number 1 [ 4.003233] usb 1-4: New USB device found, idVendor=1199, idProduct=68c0, bcdDevice= 0.06 [ 4.003335] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.003406] usb 1-4: Product: MC7354 [ 4.003466] usb 1-4: Manufacturer: Sierra Wireless, Incorporated [ 4.560168] hid: raw HID events driver (C) Jiri Kosina [ 4.604233] e1000e: Intel(R) PRO/1000 Network Driver [ 4.604337] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.605059] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.606730] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20210730/utaddress-204) [ 4.606907] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210730/utaddress-204) [ 4.607064] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.607152] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20210730/utaddress-204) [ 4.607309] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.607392] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20210730/utaddress-204) [ 4.607544] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.607624] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.619798] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.623184] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 4.627510] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 4.641581] usbcore: registered new interface driver usbhid [ 4.641687] usbhid: USB HID core driver [ 4.659218] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock [ 4.716674] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:19:0f:16:fe:d4 [ 4.716840] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.717071] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 4.765704] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C05A.0001/input/input4 [ 4.767087] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 4.768668] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:413C:2106.0002/input/input5 [ 4.828553] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.0-2/input0 [ 4.858668] xr17v35x: loading out-of-tree module taints kernel. [ 4.859004] xr17v35x: module verification failed: signature and/or required key missing - tainting kernel [ 4.859784] Exar PCIe (XR17V35x) serial driver Revision: 2.6 [ 4.860550] 0000:01:00.0: ttyXR0 at MMIO 0xdfe00000 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.863134] init_one_xrpciserialcard line:0 [ 4.863260] 0000:01:00.0: ttyXR1 at MMIO 0xdfe00400 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.866005] init_one_xrpciserialcard line:1 [ 4.866154] 0000:01:00.0: ttyXR2 at MMIO 0xdfe00800 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.869292] init_one_xrpciserialcard line:2 [ 4.869423] 0000:01:00.0: ttyXR3 at MMIO 0xdfe00c00 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.871614] init_one_xrpciserialcard line:3 [ 4.871734] 0000:01:00.0: ttyXR4 at MMIO 0xdfe01000 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.874616] init_one_xrpciserialcard line:4 [ 4.874747] 0000:01:00.0: ttyXR5 at MMIO 0xdfe01400 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.877666] init_one_xrpciserialcard line:5 [ 4.877797] 0000:01:00.0: ttyXR6 at MMIO 0xdfe01800 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.880677] init_one_xrpciserialcard line:6 [ 4.880808] 0000:01:00.0: ttyXR7 at MMIO 0xdfe01c00 (irq = 16, base_baud = 7812500) is a XR17v35x [ 4.883629] init_one_xrpciserialcard line:7 [ 4.883761] 0000:01:00.0: ttyXR8 at MMIO 0xdfe02000 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.886656] init_one_xrpciserialcard line:8 [ 4.886790] 0000:01:00.0: ttyXR9 at MMIO 0xdfe02400 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.889737] init_one_xrpciserialcard line:9 [ 4.889869] 0000:01:00.0: ttyXR10 at MMIO 0xdfe02800 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.892760] init_one_xrpciserialcard line:10 [ 4.892895] 0000:01:00.0: ttyXR11 at MMIO 0xdfe02c00 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.895706] init_one_xrpciserialcard line:11 [ 4.895845] 0000:01:00.0: ttyXR12 at MMIO 0xdfe03000 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.898754] init_one_xrpciserialcard line:12 [ 4.898889] 0000:01:00.0: ttyXR13 at MMIO 0xdfe03400 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.901785] init_one_xrpciserialcard line:13 [ 4.901914] 0000:01:00.0: ttyXR14 at MMIO 0xdfe03800 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.904787] init_one_xrpciserialcard line:14 [ 4.904924] 0000:01:00.0: ttyXR15 at MMIO 0xdfe03c00 (irq = 16, base_baud = 3906250) is a XR17v35x [ 4.907777] init_one_xrpciserialcard line:15 [ 4.908292] 0000:02:00.0: ttyXR16 at MMIO 0xdfd00000 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.911134] init_one_xrpciserialcard line:16 [ 4.911270] 0000:02:00.0: ttyXR17 at MMIO 0xdfd00400 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.914218] init_one_xrpciserialcard line:17 [ 4.914352] 0000:02:00.0: ttyXR18 at MMIO 0xdfd00800 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.917274] init_one_xrpciserialcard line:18 [ 4.917410] 0000:02:00.0: ttyXR19 at MMIO 0xdfd00c00 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.919605] init_one_xrpciserialcard line:19 [ 4.919724] 0000:02:00.0: ttyXR20 at MMIO 0xdfd01000 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.923592] init_one_xrpciserialcard line:20 [ 4.923722] 0000:02:00.0: ttyXR21 at MMIO 0xdfd01400 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.925985] init_one_xrpciserialcard line:21 [ 4.926104] 0000:02:00.0: ttyXR22 at MMIO 0xdfd01800 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.929002] init_one_xrpciserialcard line:22 [ 4.929133] 0000:02:00.0: ttyXR23 at MMIO 0xdfd01c00 (irq = 17, base_baud = 7812500) is a XR17v35x [ 4.932161] init_one_xrpciserialcard line:23 [ 4.951126] EXT4-fs (sda2): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 4.952565] EXT4-fs (sda2): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 4.953811] EXT4-fs (sda2): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 4.959250] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 4.992262] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.010477] EXT4-fs (sda3): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 5.011854] EXT4-fs (sda3): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 5.013286] EXT4-fs (sda3): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 5.018321] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.174352] EXT4-fs (sda2): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 5.181385] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.696607] systemd[1]: Inserted module 'autofs4' [ 5.769138] systemd[1]: systemd 249.11-0ubuntu3.11 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.792605] systemd[1]: Detected architecture x86-64. [ 5.799813] systemd[1]: Hostname set to . [ 6.252326] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 6.476320] systemd[1]: Queued start job for default target Graphical Interface. [ 6.477964] random: systemd: uninitialized urandom read (16 bytes read) [ 6.482388] systemd[1]: Created slice Slice /system/modprobe. [ 6.483118] random: systemd: uninitialized urandom read (16 bytes read) [ 6.485018] systemd[1]: Created slice Slice /system/systemd-fsck. [ 6.485516] random: systemd: uninitialized urandom read (16 bytes read) [ 6.487632] systemd[1]: Created slice Slice /system/systemd-journald. [ 6.489939] systemd[1]: Created slice Slice /system/systemd-journald-varlink. [ 6.491750] systemd[1]: Created slice User and Session Slice. [ 6.492648] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.494059] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.494987] systemd[1]: Reached target Remote File Systems. [ 6.495471] systemd[1]: Reached target Slice Units. [ 6.496050] systemd[1]: Reached target Swaps. [ 6.496613] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.497901] systemd[1]: Listening on Syslog Socket. [ 6.498995] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.499837] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.501499] systemd[1]: Listening on Journal Audit Socket. [ 6.502570] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.503787] systemd[1]: Listening on Journal Socket. [ 6.505707] systemd[1]: Listening on udev Control Socket. [ 6.506825] systemd[1]: Listening on udev Kernel Socket. [ 6.511321] systemd[1]: Mounting Huge Pages File System... [ 6.516574] systemd[1]: Mounting POSIX Message Queue File System... [ 6.523995] systemd[1]: Mounting Kernel Debug File System... [ 6.531545] systemd[1]: Mounting Kernel Trace File System... [ 6.541843] systemd[1]: Starting Journal Service... [ 6.549842] systemd[1]: Starting Set the console keyboard layout... [ 6.557576] systemd[1]: Starting Create List of Static Device Nodes... [ 6.565708] systemd[1]: Starting Load Kernel Module configfs... [ 6.574057] systemd[1]: Starting Load Kernel Module drm... [ 6.582308] systemd[1]: Starting Load Kernel Module efi_pstore... [ 6.590431] systemd[1]: Starting Load Kernel Module fuse... [ 6.597969] systemd[1]: Starting nftables... [ 6.621695] systemd[1]: Starting Load Kernel Modules... [ 6.638308] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.644569] systemd[1]: Starting Coldplug All udev Devices... [ 6.658762] systemd[1]: Mounted Huge Pages File System. [ 6.660049] systemd[1]: Mounted POSIX Message Queue File System. [ 6.661335] systemd[1]: Mounted Kernel Debug File System. [ 6.662695] systemd[1]: Mounted Kernel Trace File System. [ 6.666111] systemd[1]: Finished Create List of Static Device Nodes. [ 6.669052] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.671035] systemd[1]: Finished Load Kernel Module configfs. [ 6.674088] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.676743] systemd[1]: Finished Load Kernel Module efi_pstore. [ 6.680084] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.681969] systemd[1]: Finished Load Kernel Module fuse. [ 6.685217] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.694654] systemd[1]: Mounting FUSE Control File System... [ 6.703122] systemd[1]: Mounting Kernel Configuration File System... [ 6.708250] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.724900] systemd[1]: Starting Load/Save Random Seed... [ 6.757759] systemd[1]: Starting Create System Users... [ 6.791172] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.793257] systemd[1]: Finished Load Kernel Module drm. [ 6.794770] systemd[1]: Mounted FUSE Control File System. [ 6.795835] systemd[1]: Mounted Kernel Configuration File System. [ 6.845200] systemd[1]: Finished Create System Users. [ 6.853630] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.947088] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.971051] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 7.006307] systemd[1]: Finished nftables. [ 7.045311] [drm:psb_intel_opregion_setup [gma500_gfx]] Public ACPI methods supported [ 7.045380] [drm:psb_intel_opregion_setup [gma500_gfx]] ASLE supported [ 7.045587] [drm:psb_intel_init_bios [gma500_gfx]] Using VBT from OpRegion: $VBT CEDARVIEW d [ 7.045647] [drm:psb_intel_init_bios [gma500_gfx]] LVDS VBT config bits: 0x1 [ 7.045705] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.045902] [drm:parse_sdvo_device_mapping [gma500_gfx]] No SDVO device info is found in VBT [ 7.045964] [drm:parse_edp [gma500_gfx]] EDP timing in vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 7.046017] [drm:parse_edp [gma500_gfx]] VBT reports EDP: Lane_count 1, Lane_rate 6, Bpp 18 [ 7.046069] [drm:parse_edp [gma500_gfx]] VBT reports EDP: VSwing 0, Preemph 0 [ 7.046237] pmd_set_huge: Cannot satisfy [mem 0x7f800000-0x7fa00000] with a huge-page mapping due to MTRR override. [ 7.071261] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.085158] acpi device:25: registered as cooling_device5 [ 7.085616] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 7.121495] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSDDC_C [ 7.129195] [drm:cdv_intel_dp_init [gma500_gfx]] i2c_init DPDDC-C [ 7.129755] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 7.129801] [drm:cdv_intel_dp_i2c_aux_ch [gma500_gfx]] aux_ch failed -110 [ 7.130345] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 7.130390] [drm:cdv_intel_dp_i2c_aux_ch [gma500_gfx]] aux_ch failed -110 [ 7.314535] systemd[1]: Started Journal Service. [ 7.420845] systemd-journald[263]: Received client request to flush runtime journal. [ 7.504848] [drm:drm_client_modeset_probe [drm]] [ 7.505065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 7.531999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] status updated from unknown to disconnected [ 7.532132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 7.532237] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 7.532337] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] status updated from unknown to connected [ 7.536986] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 7.537236] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 7.537348] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.537543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 7.551338] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 7.551521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] status updated from unknown to disconnected [ 7.551625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 7.551723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 7.552354] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 7.552416] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] status updated from unknown to disconnected [ 7.552515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 7.552610] [drm:drm_client_modeset_probe [drm]] connector 37 enabled? no [ 7.552774] [drm:drm_client_modeset_probe [drm]] connector 39 enabled? yes [ 7.552930] [drm:drm_client_modeset_probe [drm]] connector 41 enabled? no [ 7.553080] [drm:drm_client_modeset_probe [drm]] connector 43 enabled? no [ 7.553234] [drm:drm_client_target_preferred [drm]] looking for cmdline mode on connector 39 [ 7.553385] [drm:drm_client_target_preferred [drm]] looking for preferred mode on connector 39 0 [ 7.553538] [drm:drm_client_target_preferred [drm]] found mode 1024x600 [ 7.553694] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 4096x4096 config [ 7.553860] [drm:drm_client_modeset_probe [drm]] desired mode 1024x600 set on crtc 34 (0,0) [ 7.554029] gma500 0000:00:02.0: [drm:drm_fb_helper_single_fb_probe [drm_kms_helper]] test CRTC 0 primary plane [ 7.554135] gma500 0000:00:02.0: [drm:drm_fb_helper_single_fb_probe [drm_kms_helper]] test CRTC 1 primary plane [ 7.555713] fbcon: gma500drmfb (fb0) is primary device [ 7.557047] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 7.557151] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:32:crtc-0] [NOFB] [ 7.562392] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 7.567679] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 7.596983] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 7.597066] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 7.597142] [drm:drm_crtc_helper_set_config [drm_kms_helper]] crtc has no fb, full mode set [ 7.597216] [drm:drm_crtc_helper_set_config [drm_kms_helper]] modes are different, full mode set [ 7.597304] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 7.597472] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.597661] [drm:drm_crtc_helper_set_config [drm_kms_helper]] encoder changed, full mode switch [ 7.597762] [drm:drm_crtc_helper_set_config [drm_kms_helper]] crtc changed, full mode switch [ 7.597850] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 7.597950] [drm:drm_crtc_helper_set_config [drm_kms_helper]] attempting to set mode from userspace [ 7.598040] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.598238] [drm:drm_crtc_helper_set_mode [drm_kms_helper]] [CRTC:34:crtc-1] [ 7.618213] [drm:cdv_intel_crtc_mode_set [gma500_gfx]] Use SSC reference clock 100 Mhz [ 7.618282] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.627989] [drm:cdv_sb_write [gma500_gfx]] 0x00008038: 0x0068a701 (before) [ 7.628058] [drm:cdv_sb_write [gma500_gfx]] 0x00008038: 0x0068a701 [ 7.651988] [drm:cdv_sb_write [gma500_gfx]] 0x00008038: 0x0068a701 (after) [ 7.663986] [drm:cdv_dpll_set_clock_cdv.isra.0 [gma500_gfx]] use their DPLL for pipe A/B [ 7.676010] [drm:cdv_sb_write [gma500_gfx]] 0x00008030: 0x7e40221c (before) [ 7.676079] [drm:cdv_sb_write [gma500_gfx]] 0x00008030: 0x7e40221c [ 7.699990] [drm:cdv_sb_write [gma500_gfx]] 0x00008030: 0x7e40221c (after) [ 7.723988] [drm:cdv_sb_write [gma500_gfx]] 0x00008028: 0x3f00217f (before) [ 7.724057] [drm:cdv_sb_write [gma500_gfx]] 0x00008028: 0x3f00217f [ 7.748031] [drm:cdv_sb_write [gma500_gfx]] 0x00008028: 0x3f00217f (after) [ 7.772009] [drm:cdv_sb_write [gma500_gfx]] 0x00008034: 0x88000157 (before) [ 7.772073] [drm:cdv_sb_write [gma500_gfx]] 0x00008034: 0x88000157 [ 7.796000] [drm:cdv_sb_write [gma500_gfx]] 0x00008034: 0x88000157 (after) [ 7.819998] [drm:cdv_sb_write [gma500_gfx]] 0x0000803c: 0x85558000 (before) [ 7.820063] [drm:cdv_sb_write [gma500_gfx]] 0x0000803c: 0x85558000 [ 7.843972] [drm:cdv_sb_write [gma500_gfx]] 0x0000803c: 0x85558000 (after) [ 7.844189] [drm:cdv_intel_crtc_mode_set [gma500_gfx]] Mode for pipe B: [ 7.844235] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 7.891948] [drm:drm_crtc_helper_set_mode [drm_kms_helper]] [ENCODER:40:LVDS-40] set [MODE:1024x600] [ 7.932054] [drm:drm_crtc_helper_set_config [drm_kms_helper]] Setting connector DPMS state to on [ 7.932160] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] set DPMS on [ 8.011923] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 8.012025] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 8.012125] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 8.022356] Console: switching to colour frame buffer device 128x37 [ 8.022485] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 8.022579] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 8.022677] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 8.033626] gma500 0000:00:02.0: [drm] fb0: gma500drmfb frame buffer device [ 8.040398] random: systemd: uninitialized urandom read (16 bytes read) [ 8.079205] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0 [ 8.217330] [drm:psb_intel_opregion_asle_work [gma500_gfx]] asle set backlight 800000ff [ 8.518178] serialxr_set_termios: Port Index:5 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 8.518202] Using the 16x Mode [ 8.525511] Hardware Flow Control Disabled [ 8.528124] No Software Flow Control [ 8.530790] AUTO XANY NOT Enabled [ 8.570092] random: systemd: uninitialized urandom read (16 bytes read) [ 8.573468] random: systemd: uninitialized urandom read (16 bytes read) [ 8.580089] serialxr_set_termios: Port Index:5 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 8.580112] Using the 16x Mode [ 8.585080] random: systemd: uninitialized urandom read (16 bytes read) [ 8.586278] Hardware Flow Control Disabled [ 8.596334] No Software Flow Control [ 8.599984] AUTO XANY NOT Enabled [ 8.711985] random: crng init done [ 8.715535] random: 117 urandom warning(s) missed due to ratelimiting [ 8.867862] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.876845] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.076086] gma500 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] [ 9.076213] [drm:drm_client_modeset_probe [drm]] [ 9.076404] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 9.099957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 9.100100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 9.104735] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 9.105153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 9.105234] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 9.105359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 9.109996] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 9.110185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 9.110308] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 9.110913] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 9.110964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 9.111073] [drm:drm_client_modeset_probe [drm]] connector 37 enabled? no [ 9.111242] [drm:drm_client_modeset_probe [drm]] connector 39 enabled? yes [ 9.111408] [drm:drm_client_modeset_probe [drm]] connector 41 enabled? no [ 9.111581] [drm:drm_client_modeset_probe [drm]] connector 43 enabled? no [ 9.111739] [drm:drm_client_target_preferred [drm]] looking for cmdline mode on connector 39 [ 9.111887] [drm:drm_client_target_preferred [drm]] looking for preferred mode on connector 39 0 [ 9.112105] [drm:drm_client_target_preferred [drm]] found mode 1024x600 [ 9.112276] [drm:drm_client_modeset_probe [drm]] picking CRTCs for 1024x600 config [ 9.112466] [drm:drm_client_modeset_probe [drm]] desired mode 1024x600 set on crtc 34 (0,0) [ 9.112661] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 9.112763] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:32:crtc-0] [NOFB] [ 9.192360] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 9.192473] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 9.192729] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 9.290117] usbcore: registered new interface driver usbserial_generic [ 9.290179] usbserial: USB Serial support registered for generic [ 9.334852] usbcore: registered new interface driver qcserial [ 9.334910] usbserial: USB Serial support registered for Qualcomm USB modem [ 9.335637] qcserial 1-4:1.0: Qualcomm USB modem converter detected [ 9.344626] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB0 [ 9.363613] qcserial 1-4:1.2: Qualcomm USB modem converter detected [ 9.376173] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB1 [ 9.378042] qcserial 1-4:1.3: Qualcomm USB modem converter detected [ 9.454377] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB2 [ 9.477572] ath: EEPROM regdomain: 0x0 [ 9.477589] ath: EEPROM indicates default country code should be used [ 9.477594] ath: doing EEPROM country->regdmn map search [ 9.477601] ath: country maps to regdmn code: 0x3a [ 9.477607] ath: Country alpha2 being used: US [ 9.477613] ath: Regpair used: 0x3a [ 9.477871] Bluetooth: Core ver 2.22 [ 9.478060] NET: Registered PF_BLUETOOTH protocol family [ 9.478080] Bluetooth: HCI device and connection manager initialized [ 9.478099] Bluetooth: HCI socket layer initialized [ 9.478114] Bluetooth: L2CAP socket layer initialized [ 9.478161] at24 0-0051: supply vcc not found, using dummy regulator [ 9.478163] Bluetooth: SCO socket layer initialized [ 9.491682] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.515564] at24 0-0051: 256 byte spd EEPROM, read-only [ 9.532956] usbcore: registered new interface driver cdc_wdm [ 9.557192] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb8a240c00000, irq=18 [ 9.629854] qmi_wwan 1-4:1.8: cdc-wdm0: USB WDM device [ 9.631259] qmi_wwan 1-4:1.8 wwan0: register 'qmi_wwan' at usb-0000:00:1d.7-4, WWAN/QMI device, 2e:c5:29:21:21:d8 [ 9.631448] usbcore: registered new interface driver qmi_wwan [ 9.692837] usbcore: registered new interface driver btusb [ 9.790716] usb 3-1: Direct firmware load for ar3k/AthrBT_0x11020000.dfu failed with error -2 [ 9.790744] Bluetooth: Patch file not found ar3k/AthrBT_0x11020000.dfu [ 9.795061] Bluetooth: Loading patch file failed [ 9.799648] ath3k: probe of 3-1:1.0 failed with error -2 [ 9.830014] usbcore: registered new interface driver ath3k [ 10.139796] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD73E1X5: line_outs=4 (0xa/0xd/0xc/0xe/0x0) type:speaker [ 10.139820] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.139832] snd_hda_codec_idt hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.139843] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 10.139851] snd_hda_codec_idt hdaudioC0D0: inputs: [ 10.139858] snd_hda_codec_idt hdaudioC0D0: Line=0xb [ 10.318753] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 10.324462] EXT4-fs (sda3): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0 [ 10.364079] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 10.380942] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 10.691196] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 10.691320] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 10.691432] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 10.708469] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 10.708590] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 10.708704] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 10.750232] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 10.750347] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 10.750455] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 10.767548] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 10.767636] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 10.767714] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 11.958132] serialxr_set_termios: Port Index:5 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 11.958162] Using the 16x Mode [ 11.958176] Hardware Flow Control Disabled [ 11.958180] No Software Flow Control [ 11.958191] AUTO XANY NOT Enabled [ 13.139675] serialxr_set_termios: Port Index:5 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 13.139703] Using the 16x Mode [ 13.139713] Hardware Flow Control Disabled [ 13.139716] No Software Flow Control [ 13.139725] AUTO XANY NOT Enabled [ 13.141300] handling port<5> Parity error....(0) [ 13.260795] serialxr_set_termios: Port Index:0 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 13.260820] Using the 16x Mode [ 13.260829] Hardware Flow Control Disabled [ 13.260832] No Software Flow Control [ 13.260841] AUTO XANY NOT Enabled [ 13.267495] serialxr_set_termios: Port Index:0 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 13.267523] Using the 16x Mode [ 13.267534] Hardware Flow Control Disabled [ 13.267539] No Software Flow Control [ 13.267548] AUTO XANY NOT Enabled [ 14.212632] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 14.212737] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:32:crtc-0] [NOFB] [ 14.292651] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 14.292801] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 14.293004] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 14.372717] serialxr_set_termios: Port Index:3 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 14.372746] Using the 16x Mode [ 14.372760] Hardware Flow Control Disabled [ 14.372765] No Software Flow Control [ 14.372776] AUTO XANY NOT Enabled [ 14.372930] serialxr_set_termios: Port Index:3 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 14.372951] Using the 16x Mode [ 14.372962] Hardware Flow Control Disabled [ 14.372967] No Software Flow Control [ 14.372977] AUTO XANY NOT Enabled [ 14.406603] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 14.406744] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 14.406857] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 14.448653] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 14.448813] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:32:crtc-0] [NOFB] [ 14.488732] serialxr_set_termios: Port Index:5 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 14.488762] Using the 16x Mode [ 14.488775] Hardware Flow Control Disabled [ 14.488781] No Software Flow Control [ 14.488790] AUTO XANY NOT Enabled [ 14.529146] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 14.529252] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:47] #connectors=1 (x y) (0 0) [ 14.529693] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 14.542160] [drm:drm_mode_addfb2 [drm]] [FB:48] [ 14.545908] serialxr_set_termios: Port Index:0 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 14.545934] Using the 16x Mode [ 14.545946] Hardware Flow Control Disabled [ 14.545949] No Software Flow Control [ 14.545958] AUTO XANY NOT Enabled [ 14.776449] serialxr_set_termios: Port Index:5 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 14.776478] Using the 16x Mode [ 14.776491] Hardware Flow Control Disabled [ 14.776494] No Software Flow Control [ 14.776504] AUTO XANY NOT Enabled [ 15.136049] serialxr_set_termios: Port Index:5 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 15.136077] Using the 16x Mode [ 15.136090] Hardware Flow Control Disabled [ 15.136094] No Software Flow Control [ 15.136103] AUTO XANY NOT Enabled [ 15.700923] input: UPDD single touch as /devices/virtual/input/input8 [ 15.708109] input: UPDD right mouse button as /devices/virtual/input/input9 [ 16.064762] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 16.092066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 16.092827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 16.097541] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 16.097807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 16.097943] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 16.098475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 16.104052] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 16.104234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 16.104680] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 16.105272] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 16.105335] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 16.106624] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 16.139991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 16.140302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 16.144993] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 16.145286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 16.145419] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 16.150645] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 16.155416] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 16.155602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 16.156079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 16.156716] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 16.156768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 16.865091] e1000e 0000:04:00.0 eth0: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.865240] e1000e 0000:04:00.0 eth0: 10/100 speed: disabling TSO [ 17.235501] [drm:drm_mode_setcrtc [drm]] [CRTC:32:crtc-0] [ 17.235698] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 17.235811] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:32:crtc-0] [NOFB] [ 17.316300] [drm:drm_mode_addfb2 [drm]] [FB:48] [ 17.316545] [drm:drm_mode_setcrtc [drm]] [CRTC:34:crtc-1] [ 17.316755] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:39:LVDS-1] [ 17.316931] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [ 17.317041] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CRTC:34:crtc-1] [FB:48] #connectors=1 (x y) (0 0) [ 17.317150] [drm:drm_crtc_helper_set_config [drm_kms_helper]] [CONNECTOR:39:LVDS-1] to [CRTC:34:crtc-1] [ 20.371576] serialxr_set_termios: Port Index:0 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 20.371598] Using the 16x Mode [ 20.371607] Hardware Flow Control Disabled [ 20.371610] No Software Flow Control [ 20.371619] AUTO XANY NOT Enabled [ 20.371731] serialxr_set_termios: Port Index:0 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 20.371747] Using the 16x Mode [ 20.371754] Hardware Flow Control Disabled [ 20.371757] No Software Flow Control [ 20.371765] AUTO XANY NOT Enabled [ 20.371844] serialxr_set_termios: Port Index:0 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 20.371861] Using the 16x Mode [ 20.371869] Hardware Flow Control Disabled [ 20.371872] No Software Flow Control [ 20.371880] AUTO XANY NOT Enabled [ 22.514890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 22.548066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 22.548364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 22.553813] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 22.554058] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 22.554164] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 22.556718] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 22.563006] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 22.563186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 22.563392] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 22.564070] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 22.564124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 30.128933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] [ 30.152020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:37:VGA-1] disconnected [ 30.152258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] [ 30.157656] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 30.157944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:39:LVDS-1] probed modes : [ 30.158069] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x600": 42 29000 1024 1076 1080 1130 600 608 612 618 0x8 0xa [ 30.160381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] [ 30.165037] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter intel drm HDMIC [ 30.165165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:41:DVI-D-1] disconnected [ 30.165330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] [ 30.165908] [drm:cdv_intel_dp_aux_ch [gma500_gfx]] dp_aux_ch timeout status 0x51440064 [ 30.165938] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:DP-1] disconnected [ 32.359405] serialxr_set_termios: Port Index:12 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.359436] Using the 16x Mode [ 32.359451] Hardware Flow Control Disabled [ 32.359457] No Software Flow Control [ 32.359468] AUTO XANY NOT Enabled [ 32.359580] serialxr_set_termios: Port Index:12 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.359603] Using the 16x Mode [ 32.359615] Hardware Flow Control Disabled [ 32.359619] No Software Flow Control [ 32.359631] AUTO XANY NOT Enabled [ 32.359699] serialxr_set_termios: Port Index:12 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 32.359722] Using the 16x Mode [ 32.359733] Hardware Flow Control Disabled [ 32.359738] No Software Flow Control [ 32.359749] AUTO XANY NOT Enabled [ 32.359848] serialxr_set_termios: Port Index:12 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 32.359871] Using the 16x Mode [ 32.359882] Hardware Flow Control Disabled [ 32.359887] No Software Flow Control [ 32.359899] AUTO XANY NOT Enabled [ 32.371777] serialxr_set_termios: Port Index:13 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.371808] Using the 16x Mode [ 32.371827] Hardware Flow Control Disabled [ 32.371831] No Software Flow Control [ 32.371841] AUTO XANY NOT Enabled [ 32.372130] serialxr_set_termios: Port Index:13 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.372156] Using the 16x Mode [ 32.372168] Hardware Flow Control Disabled [ 32.372172] No Software Flow Control [ 32.372184] AUTO XANY NOT Enabled [ 32.372346] serialxr_set_termios: Port Index:13 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 32.372369] Using the 16x Mode [ 32.372381] Hardware Flow Control Disabled [ 32.372387] No Software Flow Control [ 32.372399] AUTO XANY NOT Enabled [ 32.372503] serialxr_set_termios: Port Index:13 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 32.372525] Using the 16x Mode [ 32.372537] Hardware Flow Control Disabled [ 32.372542] No Software Flow Control [ 32.372554] AUTO XANY NOT Enabled [ 32.395370] serialxr_set_termios: Port Index:1 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.395397] Using the 16x Mode [ 32.395409] Hardware Flow Control Disabled [ 32.395414] No Software Flow Control [ 32.395423] AUTO XANY NOT Enabled [ 32.395519] serialxr_set_termios: Port Index:1 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 32.395539] Using the 16x Mode [ 32.395549] Hardware Flow Control Disabled [ 32.395553] No Software Flow Control [ 32.395562] AUTO XANY NOT Enabled [ 32.395609] serialxr_set_termios: Port Index:1 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 32.395628] Using the 16x Mode [ 32.395637] Hardware Flow Control Disabled [ 32.395641] No Software Flow Control [ 32.395650] AUTO XANY NOT Enabled [ 32.395718] serialxr_set_termios: Port Index:1 c_ispeed:38400 c_ospeed:38400 baud=38400 [ 32.395736] Using the 16x Mode [ 32.395746] Hardware Flow Control Disabled [ 32.395749] No Software Flow Control [ 32.395759] AUTO XANY NOT Enabled [ 33.192742] serialxr_set_termios: Port Index:8 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 33.192766] Using the 16x Mode [ 33.192778] Hardware Flow Control Disabled [ 33.192782] No Software Flow Control [ 33.192791] AUTO XANY NOT Enabled [ 33.192898] serialxr_set_termios: Port Index:8 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 33.192919] Using the 16x Mode [ 33.192930] Hardware Flow Control Disabled [ 33.192934] No Software Flow Control [ 33.192945] AUTO XANY NOT Enabled [ 33.192999] serialxr_set_termios: Port Index:8 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 33.193019] Using the 16x Mode [ 33.193029] Hardware Flow Control Disabled [ 33.193033] No Software Flow Control [ 33.193044] AUTO XANY NOT Enabled [ 33.193118] serialxr_set_termios: Port Index:8 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 33.193137] Using the 16x Mode [ 33.193148] Hardware Flow Control Disabled [ 33.193153] No Software Flow Control [ 33.193163] AUTO XANY NOT Enabled [ 34.670071] serialxr_set_termios: Port Index:2 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 34.670108] Using the 16x Mode [ 34.670125] Hardware Flow Control Disabled [ 34.670132] No Software Flow Control [ 34.670144] AUTO XANY NOT Enabled [ 34.670389] serialxr_set_termios: Port Index:2 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 34.670417] Using the 16x Mode [ 34.670431] Hardware Flow Control Disabled [ 34.670437] No Software Flow Control [ 34.670449] AUTO XANY NOT Enabled [ 34.670532] serialxr_set_termios: Port Index:2 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 34.670558] Using the 16x Mode [ 34.670571] Hardware Flow Control Disabled [ 34.670577] No Software Flow Control [ 34.670589] AUTO XANY NOT Enabled [ 34.670716] serialxr_set_termios: Port Index:2 c_ispeed:115200 c_ospeed:115200 baud=115200 [ 34.670742] Using the 16x Mode [ 34.670754] Hardware Flow Control Disabled [ 34.670761] No Software Flow Control [ 34.670772] AUTO XANY NOT Enabled [ 36.011072] serialxr_set_termios: Port Index:6 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 36.011093] Using the 16x Mode [ 36.011102] Hardware Flow Control Disabled [ 36.011105] No Software Flow Control [ 36.011113] AUTO XANY NOT Enabled [ 36.011182] serialxr_set_termios: Port Index:6 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 36.011197] Using the 16x Mode [ 36.011204] Hardware Flow Control Disabled [ 36.011206] No Software Flow Control [ 36.011214] AUTO XANY NOT Enabled [ 36.011348] serialxr_set_termios: Port Index:6 c_ispeed:9600 c_ospeed:9600 baud=9600 [ 36.011363] Using the 16x Mode [ 36.011370] Hardware Flow Control Disabled [ 36.011373] No Software Flow Control [ 36.011381] AUTO XANY NOT Enabled [ 169.158904] perf: interrupt took too long (7643 > 2500), lowering kernel.perf_event_max_sample_rate to 26000 volaris@Ubuntu-V8:~$