[PATCH] drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY

[Colin Xu]

Guest kernel will write to BXT_PHY_CTL_FAMILY to reset DDI PHY
and pull BXT_PHY_CTL to check PHY status. Previous handling will
set/reset BXT_PHY_CTL of all PHYs at same time on receiving vreg
write to some BXT_PHY_CTL_FAMILY. If some BXT_PHY_CTL is already
enabled, following reset to another BXT_PHY_CTL_FAMILY will clear
the enabled BXT_PHY_CTL, which result in guest kernel print:

-----------------------------------
[drm:intel_ddi_get_hw_state [i915]]
*ERROR* Port B enabled but PHY powered down? (PHY_CTL 00000000)
-----------------------------------

The correct handling should operate BXT_PHY_CTL_FAMILY and
BXT_PHY_CTL on the same DDI.

Signed-off-by: Colin Xu <colin.xu at intel.com>
---
 drivers/gpu/drm/i915/gvt/handlers.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index b47986a22332..7c9fc53d7d77 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -1526,9 +1526,17 @@ static int bxt_phy_ctl_family_write(struct intel_vgpu *vgpu,
 	u32 v = *(u32 *)p_data;
 	u32 data = v & COMMON_RESET_DIS ? BXT_PHY_LANE_ENABLED : 0;
 
-	vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_A) = data;
-	vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_B) = data;
-	vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_C) = data;
+	switch (offset) {
+	case _PHY_CTL_FAMILY_EDP:
+		vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_A) = data;
+		break;
+	case _PHY_CTL_FAMILY_DDI:
+		vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_B) = data;
+		break;
+	case _PHY_CTL_FAMILY_DDI_C:
+		vgpu_vreg(vgpu, _BXT_PHY_CTL_DDI_C) = data;
+		break;
+	}
 
 	vgpu_vreg(vgpu, offset) = v;
 
@@ -3058,6 +3066,8 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt)
 		NULL, bxt_phy_ctl_family_write);
 	MMIO_DH(BXT_PHY_CTL_FAMILY(DPIO_PHY1), D_BXT,
 		NULL, bxt_phy_ctl_family_write);
+	MMIO_DH(BXT_PHY_CTL_FAMILY(DPIO_PHY2), D_BXT,
+		NULL, bxt_phy_ctl_family_write);
 	MMIO_D(BXT_PHY_CTL(PORT_A), D_BXT);
 	MMIO_D(BXT_PHY_CTL(PORT_B), D_BXT);
 	MMIO_D(BXT_PHY_CTL(PORT_C), D_BXT);
-- 
2.18.0