[Intel-xe] [PATCH 18/42] drm/i915/xe2lpd: Move registers to PICA
Jani Nikula
jani.nikula at linux.intel.com
Thu Aug 24 08:34:59 UTC 2023
On Wed, 23 Aug 2023, Lucas De Marchi <lucas.demarchi at intel.com> wrote:
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> index cb5d1be2ba19..4b5b9a97142d 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> @@ -6,13 +6,15 @@
> #ifndef __INTEL_CX0_PHY_REGS_H__
> #define __INTEL_CX0_PHY_REGS_H__
>
> +#include "i915_drv.h"
Please don't do this. Please don't add inline functions that depend on
i915_drv.h etc. being included from headers. This simple headers just
changed to including like half the headers in the entire driver. It's
that bad.
I think the main question is why does anything other than
intel_cx0_phy_regs.c need the helpers? It's probably the division
between that and intel_ddi.c that's wrong in the first place.
That's actually been one of the benefits of splitting the register
macros by area; you can tell what registers are used where, and
sometimes it gives bad code smells about stuff being accessed in the
wrong place.
BR,
Jani.
> #include "i915_reg_defs.h"
> +#include "intel_display_limits.h"
>
> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A 0x64040
> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B 0x64140
> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1 0x16F240
> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2 0x16F440
> -#define XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_M2P_MSGBUS_CTL(idx, lane) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
> @@ -27,7 +29,7 @@
> #define XELPDP_PORT_M2P_TRANSACTION_RESET REG_BIT(15)
> #define XELPDP_PORT_M2P_ADDRESS_MASK REG_GENMASK(11, 0)
> #define XELPDP_PORT_M2P_ADDRESS(val) REG_FIELD_PREP(XELPDP_PORT_M2P_ADDRESS_MASK, val)
> -#define XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_P2M_MSGBUS_STATUS(idx, lane) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
> @@ -54,7 +56,7 @@
> #define _XELPDP_PORT_BUF_CTL1_LN0_B 0x64104
> #define _XELPDP_PORT_BUF_CTL1_LN0_USBC1 0x16F200
> #define _XELPDP_PORT_BUF_CTL1_LN0_USBC2 0x16F400
> -#define XELPDP_PORT_BUF_CTL1(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_BUF_CTL1(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_BUF_CTL1_LN0_A, \
> _XELPDP_PORT_BUF_CTL1_LN0_B, \
> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
> @@ -75,7 +77,7 @@
> #define XELPDP_PORT_WIDTH_MASK REG_GENMASK(3, 1)
> #define XELPDP_PORT_WIDTH(val) REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, val)
>
> -#define XELPDP_PORT_BUF_CTL2(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_BUF_CTL2(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_BUF_CTL1_LN0_A, \
> _XELPDP_PORT_BUF_CTL1_LN0_B, \
> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
> @@ -95,7 +97,7 @@
> #define XELPDP_POWER_STATE_READY_MASK REG_GENMASK(7, 4)
> #define XELPDP_POWER_STATE_READY(val) REG_FIELD_PREP(XELPDP_POWER_STATE_READY_MASK, val)
>
> -#define XELPDP_PORT_BUF_CTL3(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_BUF_CTL3(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_BUF_CTL1_LN0_A, \
> _XELPDP_PORT_BUF_CTL1_LN0_B, \
> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
> @@ -114,7 +116,7 @@
> #define _XELPDP_PORT_CLOCK_CTL_B 0x641E0
> #define _XELPDP_PORT_CLOCK_CTL_USBC1 0x16F260
> #define _XELPDP_PORT_CLOCK_CTL_USBC2 0x16F460
> -#define XELPDP_PORT_CLOCK_CTL(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
> +#define XELPDP_PORT_CLOCK_CTL(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
> _XELPDP_PORT_CLOCK_CTL_A, \
> _XELPDP_PORT_CLOCK_CTL_B, \
> _XELPDP_PORT_CLOCK_CTL_USBC1, \
> @@ -271,4 +273,61 @@
> #define HDMI_DIV_MASK REG_GENMASK16(2, 0)
> #define HDMI_DIV(val) REG_FIELD_PREP16(HDMI_DIV_MASK, val)
>
> +/*
> + * All registers are in the same IP, with a single range. However the registers
> + * for TC_PORT come first.
> + */
> +static inline enum port xe2lpd_port_idx(enum port port)
> +{
> + return port >= PORT_TC1 ? port : PORT_TC4 + 1 + port - PORT_A;
> +}
> +
> +static inline i915_reg_t xelpdp_port_clock_ctl_reg(struct drm_i915_private *i915,
> + enum port port)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_CLOCK_CTL(xe2lpd_port_idx(port)) :
> + XELPDP_PORT_CLOCK_CTL(port);
> +}
> +
> +static inline i915_reg_t xelpdp_port_buf_ctl3_reg(struct drm_i915_private *i915,
> + enum port port)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_BUF_CTL3(xe2lpd_port_idx(port)) :
> + XELPDP_PORT_BUF_CTL3(port);
> +}
> +
> +static inline i915_reg_t xelpdp_port_buf_ctl2_reg(struct drm_i915_private *i915,
> + enum port port)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_BUF_CTL2(xe2lpd_port_idx(port)) :
> + XELPDP_PORT_BUF_CTL2(port);
> +}
> +
> +static inline i915_reg_t xelpdp_port_buf_ctl1_reg(struct drm_i915_private *i915,
> + enum port port)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_BUF_CTL1(xe2lpd_port_idx(port)) :
> + XELPDP_PORT_BUF_CTL1(port);
> +}
> +
> +static inline i915_reg_t xelpdp_port_m2p_msgbus_ctl_reg(struct drm_i915_private *i915,
> + enum port port, int lane)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_M2P_MSGBUS_CTL(xe2lpd_port_idx(port), lane) :
> + XELPDP_PORT_M2P_MSGBUS_CTL(port, lane);
> +}
> +
> +static inline i915_reg_t xelpdp_port_p2m_msgbus_status_reg(struct drm_i915_private *i915,
> + enum port port, int lane)
> +{
> + return DISPLAY_VER(i915) >= 20 ?
> + XELPDP_PORT_P2M_MSGBUS_STATUS(xe2lpd_port_idx(port), lane) :
> + XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane);
> +}
> +
> #endif /* __INTEL_CX0_REG_DEFS_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 3147ed174d83..3587ddc6d8ed 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -176,7 +176,7 @@ static void mtl_wait_ddi_buf_idle(struct drm_i915_private *i915, enum port port)
> int ret;
>
> /* FIXME: find out why Bspec's 100us timeout is too short */
> - ret = wait_for_us((intel_de_read(i915, XELPDP_PORT_BUF_CTL1(port)) &
> + ret = wait_for_us((intel_de_read(i915, xelpdp_port_buf_ctl1_reg(i915, port)) &
> XELPDP_PORT_BUF_PHY_IDLE), 10000);
> if (ret)
> drm_err(&i915->drm, "Timeout waiting for DDI BUF %c to get idle\n",
> @@ -224,7 +224,9 @@ static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv,
> }
>
> if (DISPLAY_VER(dev_priv) >= 14)
> - ret = _wait_for(!(intel_de_read(dev_priv, XELPDP_PORT_BUF_CTL1(port)) & XELPDP_PORT_BUF_PHY_IDLE),
> + ret = _wait_for(!(intel_de_read(dev_priv,
> + xelpdp_port_buf_ctl1_reg(dev_priv, port)) &
> + XELPDP_PORT_BUF_PHY_IDLE),
> timeout_us, 10, 10);
> else
> ret = _wait_for(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) & DDI_BUF_IS_IDLE),
> @@ -2365,7 +2367,7 @@ mtl_ddi_enable_d2d(struct intel_encoder *encoder)
> dig_port->saved_port_bits |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
> wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE;
> } else {
> - reg = XELPDP_PORT_BUF_CTL1(port);
> + reg = xelpdp_port_buf_ctl1_reg(dev_priv, port);
> set_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE;
> wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE;
> }
> @@ -2385,7 +2387,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
> enum port port = encoder->port;
> u32 val;
>
> - val = intel_de_read(i915, XELPDP_PORT_BUF_CTL1(port));
> + val = intel_de_read(i915, xelpdp_port_buf_ctl1_reg(i915, port));
> val &= ~XELPDP_PORT_WIDTH_MASK;
> val |= XELPDP_PORT_WIDTH(mtl_get_port_width(crtc_state->lane_count));
>
> @@ -2398,7 +2400,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
> if (dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL)
> val |= XELPDP_PORT_REVERSAL;
>
> - intel_de_write(i915, XELPDP_PORT_BUF_CTL1(port), val);
> + intel_de_write(i915, xelpdp_port_buf_ctl1_reg(i915, port), val);
> }
>
> static void mtl_port_buf_ctl_io_selection(struct intel_encoder *encoder)
> @@ -2409,7 +2411,7 @@ static void mtl_port_buf_ctl_io_selection(struct intel_encoder *encoder)
>
> val = intel_tc_port_in_tbt_alt_mode(dig_port) ?
> XELPDP_PORT_BUF_IO_SELECT_TBT : 0;
> - intel_de_rmw(i915, XELPDP_PORT_BUF_CTL1(encoder->port),
> + intel_de_rmw(i915, xelpdp_port_buf_ctl1_reg(i915, encoder->port),
> XELPDP_PORT_BUF_IO_SELECT_TBT, val);
> }
>
> @@ -2829,7 +2831,7 @@ mtl_ddi_disable_d2d_link(struct intel_encoder *encoder)
> dig_port->saved_port_bits &= ~XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
> wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE;
> } else {
> - reg = XELPDP_PORT_BUF_CTL1(port);
> + reg = xelpdp_port_buf_ctl1_reg(dev_priv, port);
> clr_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE;
> wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE;
> }
> @@ -2967,7 +2969,7 @@ static void intel_ddi_post_disable_dp(struct intel_atomic_state *state,
>
> /* De-select Thunderbolt */
> if (DISPLAY_VER(dev_priv) >= 14)
> - intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(encoder->port),
> + intel_de_rmw(dev_priv, xelpdp_port_buf_ctl1_reg(dev_priv, encoder->port),
> XELPDP_PORT_BUF_IO_SELECT_TBT, 0);
> }
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-xe
mailing list