[Intel-xe] [Intel-gfx] [RFC PATCH 2/4] drm/cgroup: Add memory accounting to DRM cgroup
Tvrtko Ursulin
tvrtko.ursulin at linux.intel.com
Wed May 3 15:31:19 UTC 2023
On 03/05/2023 09:34, Maarten Lankhorst wrote:
> Based roughly on the rdma and misc cgroup controllers, with a lot of
> the accounting code borrowed from rdma.
>
> The interface is simple:
> - populate drmcgroup_device->regions[..] name and size for each active
> region.
> - Call drm(m)cg_register_device()
> - Use drmcg_try_charge to check if you can allocate a chunk of memory,
> use drmcg_uncharge when freeing it. This may return an error code,
> or -EAGAIN when the cgroup limit is reached.
>
> The ttm code transforms -EAGAIN back to -ENOSPC since it has specific
> logic for -ENOSPC, and returning -EAGAIN to userspace causes drmIoctl
> to restart infinitely.
>
> This API allows you to limit stuff with cgroups.
> You can see the supported cards in /sys/fs/cgroup/drm.capacity
> You need to echo +drm to cgroup.subtree_control, and then you can
> partition memory.
>
> In each cgroup subdir:
> drm.max shows the current limits of the cgroup.
> drm.current the current amount of allocated memory used by this cgroup.
> drm.events shows the amount of time max memory was reached.
Events is not in the patch?
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> Documentation/admin-guide/cgroup-v2.rst | 46 ++
> Documentation/gpu/drm-compute.rst | 54 +++
> include/linux/cgroup_drm.h | 81 ++++
> kernel/cgroup/drm.c | 539 +++++++++++++++++++++++-
> 4 files changed, 699 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/gpu/drm-compute.rst
>
> diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
> index f67c0829350b..b858d99cb2ef 100644
> --- a/Documentation/admin-guide/cgroup-v2.rst
> +++ b/Documentation/admin-guide/cgroup-v2.rst
> @@ -2374,6 +2374,52 @@ RDMA Interface Files
> mlx4_0 hca_handle=1 hca_object=20
> ocrdma1 hca_handle=1 hca_object=23
>
> +DRM
> +----
> +
> +The "drm" controller regulates the distribution and accounting of
> +DRM resources.
> +
> +DRM Interface Files
> +~~~~~~~~~~~~~~~~~~~~
> +
> + drm.max
> + A readwrite nested-keyed file that exists for all the cgroups
> + except root that describes current configured resource limit
> + for a DRM device.
> +
> + Lines are keyed by device name and are not ordered.
> + Each line contains space separated resource name and its configured
> + limit that can be distributed.
> +
> + The following nested keys are defined.
> +
> + ========== =======================================================
> + region.* Maximum amount of bytes that allocatable in this region
> + ========== =======================================================
> +
> + An example for xe follows::
> +
> + 0000:03:00.0 region.vram0=1073741824 region.stolen=max
> +
> + drm.capacity
> + A read-only file that describes maximum region capacity.
> + It only exists on the root cgroup. Not all memory can be
> + allocated by cgroups, as the kernel reserves some for
> + internal use.
> +
> + An example for xe follows::
> +
> + 0000:03:00.0 region.vram0=8514437120 region.stolen=67108864
> +
> + drm.current
> + A read-only file that describes current resource usage.
> + It exists for all the cgroup except root.
> +
> + An example for xe follows::
> +
> + 0000:03:00.0 region.vram0=12550144 region.stolen=8650752
> +
> HugeTLB
> -------
>
> diff --git a/Documentation/gpu/drm-compute.rst b/Documentation/gpu/drm-compute.rst
> new file mode 100644
> index 000000000000..116270976ef7
> --- /dev/null
> +++ b/Documentation/gpu/drm-compute.rst
> @@ -0,0 +1,54 @@
> +==================================
> +Long running workloads and compute
> +==================================
> +
> +Long running workloads (compute) are workloads that will not complete in 10
> +seconds. (The time let the user wait before he reaches for the power button).
> +This means that other techniques need to be used to manage those workloads,
> +that cannot use fences.
> +
> +Some hardware may schedule compute jobs, and have no way to pre-empt them, or
> +have their memory swapped out from them. Or they simply want their workload
> +not to be preempted or swapped out at all.
> +
> +This means that it differs from what is described in driver-api/dma-buf.rst.
> +
> +As with normal compute jobs, dma-fence may not be used at all. In this case,
> +not even to force preemption. The driver with is simply forced to unmap a BO
> +from the long compute job's address space on unbind immediately, not even
> +waiting for the workload to complete. Effectively this terminates the workload
> +when there is no hardware support to recover.
> +
> +Since this is undesirable, there need to be mitigations to prevent a workload
> +from being terminated. There are several possible approach, all with their
> +advantages and drawbacks.
> +
> +The first approach you will likely try is to pin all buffers used by compute.
> +This guarantees that the job will run uninterrupted, but also allows a very
> +denial of service attack by pinning as much memory as possible, hogging the
> +all GPU memory, and possibly a huge chunk of CPU memory.
> +
> +A second approach that will work slightly better on its own is adding an option
> +not to evict when creating a new job (any kind). If all of userspace opts in
> +to this flag, it would prevent cooperating userspace from forced terminating
> +older compute jobs to start a new one.
> +
> +If job preemption and recoverable pagefaults are not available, those are the
> +only approaches possible. So even with those, you want a separate way of
> +controlling resources. The standard kernel way of doing so is cgroups.
> +
> +This creates a third option, using cgroups to prevent eviction. Both GPU and
> +driver-allocated CPU memory would be accounted to the correct cgroup, and
> +eviction would be made cgroup aware. This allows the GPU to be partitioned
> +into cgroups, that will allow jobs to run next to each other without
> +interference.
The 3rd approach is only valid if used strictly with device local
memory, right? Because as soon as system memory backed buffers are used
this approach cannot guarantee no eviction can be triggered.
> +
> +The interface to the cgroup would be similar to the current CPU memory
> +interface, with similar semantics for min/low/high/max, if eviction can
> +be made cgroup aware. For now only max is implemented.
> +
> +What should be noted is that each memory region (tiled memory for example)
> +should have its own accounting, using $card key0 = value0 key1 = value1.
> +
> +The key is set to the regionid set by the driver, for example "tile0".
> +For the value of $card, we use drmGetUnique().
> diff --git a/include/linux/cgroup_drm.h b/include/linux/cgroup_drm.h
> index 8ef66a47619f..4f17b1c85f47 100644
> --- a/include/linux/cgroup_drm.h
> +++ b/include/linux/cgroup_drm.h
> @@ -6,4 +6,85 @@
> #ifndef _CGROUP_DRM_H
> #define _CGROUP_DRM_H
>
> +#include <linux/types.h>
> +
> +#include <drm/drm_managed.h>
> +
> +struct drm_device;
> +struct drm_file;
> +
> +struct drmcgroup_state;
> +
> +/*
> + * Use 8 as max, because of N^2 lookup when setting things, can be bumped if needed
> + * Identical to TTM_NUM_MEM_TYPES to allow simplifying that code.
> + */
> +#define DRMCG_MAX_REGIONS 8
> +
> +struct drmcgroup_device {
> + struct list_head list;
> + struct list_head pools;
> +
> + struct {
> + u64 size;
> + const char *name;
> + } regions[DRMCG_MAX_REGIONS];
> +
> + /* Name describing the card, set by drmcg_register_device */
> + const char *name;
> +
> +};
> +
> +#if IS_ENABLED(CONFIG_CGROUP_DRM)
> +int drmcg_register_device(struct drm_device *dev,
> + struct drmcgroup_device *drm_cg);
> +void drmcg_unregister_device(struct drmcgroup_device *cgdev);
> +int drmcg_try_charge(struct drmcgroup_state **drmcg,
> + struct drmcgroup_device *cgdev,
> + u32 index, u64 size);
> +void drmcg_uncharge(struct drmcgroup_state *drmcg,
> + struct drmcgroup_device *cgdev,
> + u32 index, u64 size);
> +#else
> +static inline int
> +drmcg_register_device(struct drm_device *dev,
> + struct drm_cgroup *drm_cg)
> +{
> + return 0;
> +}
> +
> +static inline void drmcg_unregister_device(struct drmcgroup_device *cgdev)
> +{
> +}
> +
> +static inline int drmcg_try_charge(struct drmcgroup_state **drmcg,
> + struct drmcgroup_device *cgdev,
> + u32 index, u64 size)
> +{
> + *drmcg = NULL;
> + return 0;
> +}
> +
> +static inline void drmcg_uncharge(struct drmcgroup_state *drmcg,
> + struct drmcgroup_device *cgdev,
> + u32 index, u64 size)
> +{ }
> +#endif
> +
> +static inline void drmmcg_unregister_device(struct drm_device *dev, void *arg)
> +{
> + drmcg_unregister_device(arg);
> +}
> +
> +/*
> + * This needs to be done as inline, because cgroup lives in the core
> + * kernel and it cannot call drm calls directly
> + */
> +static inline int drmmcg_register_device(struct drm_device *dev,
> + struct drmcgroup_device *cgdev)
> +{
> + return drmcg_register_device(dev, cgdev) ?:
> + drmm_add_action_or_reset(dev, drmmcg_unregister_device, cgdev);
> +}
> +
> #endif /* _CGROUP_DRM_H */
> diff --git a/kernel/cgroup/drm.c b/kernel/cgroup/drm.c
> index 02c8eaa633d3..a93d9344fd36 100644
> --- a/kernel/cgroup/drm.c
> +++ b/kernel/cgroup/drm.c
> @@ -1,60 +1,557 @@
> -/* SPDX-License-Identifier: MIT */
> +// SPDX-License-Identifier: GPL-2.0
> /*
> - * Copyright © 2023 Intel Corporation
> + * Copyright 2023 Intel
> + * Partially based on the rdma and misc controllers, which bear the following copyrights:
> + *
> + * Copyright 2020 Google LLC
> + * Copyright (C) 2016 Parav Pandit <pandit.parav at gmail.com>
> */
>
> #include <linux/cgroup.h>
> #include <linux/cgroup_drm.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/parser.h>
> #include <linux/slab.h>
>
> -struct drm_cgroup_state {
As a side note, it'd be easier to read the diff if you left the name as
is, and some other details too, like the static root group (I need to
remind myself if/why I needed it, but does it harm you?) and my missed
static keywords and needless static struct initialization. I will fix
that up in my patch localy. Aynway, that way it would maybe be less
churn from one patch to the other in the series.
> +#include <drm/drm_device.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_file.h>
> +#include <drm/drm_managed.h>
> +
> +struct drmcgroup_state {
> struct cgroup_subsys_state css;
> +
> + struct list_head pools;
> };
>
> -struct drm_root_cgroup_state {
> - struct drm_cgroup_state drmcs;
> +struct drmcgroup_pool_state {
> + struct drmcgroup_device *device;
> + struct drmcgroup_resource {
> + s64 max, used;
> + } resources[DRMCG_MAX_REGIONS];
> +
> + s64 usage_sum;
> +
> + struct list_head cg_node;
cg always makes me think cgroup and not css so it is a bit confusing.
Why are two lists needed?
> + struct list_head dev_node;
> };
>
> -static struct drm_root_cgroup_state root_drmcs;
> +static DEFINE_MUTEX(drmcg_mutex);
> +static LIST_HEAD(drmcg_devices);
>
> -static inline struct drm_cgroup_state *
> +static inline struct drmcgroup_state *
> css_to_drmcs(struct cgroup_subsys_state *css)
> {
> - return container_of(css, struct drm_cgroup_state, css);
> + return container_of(css, struct drmcgroup_state, css);
> +}
> +
> +static inline struct drmcgroup_state *get_current_drmcg(void)
> +{
> + return css_to_drmcs(task_get_css(current, drm_cgrp_id));
> +}
> +
> +static struct drmcgroup_state *parent_drmcg(struct drmcgroup_state *cg)
> +{
> + return css_to_drmcs(cg->css.parent);
> +}
> +
> +static void free_cg_pool_locked(struct drmcgroup_pool_state *pool)
> +{
> + lockdep_assert_held(&drmcg_mutex);
> +
> + list_del(&pool->cg_node);
> + list_del(&pool->dev_node);
> + kfree(pool);
> +}
> +
> +static void
> +set_resource_max(struct drmcgroup_pool_state *pool, int i, u64 new_max)
> +{
> + pool->resources[i].max = new_max;
> +}
> +
> +static void set_all_resource_max_limit(struct drmcgroup_pool_state *rpool)
> +{
> + int i;
> +
> + for (i = 0; i < DRMCG_MAX_REGIONS; i++)
> + set_resource_max(rpool, i, S64_MAX);
> +}
> +
> +static void drmcs_offline(struct cgroup_subsys_state *css)
> +{
> + struct drmcgroup_state *drmcs = css_to_drmcs(css);
> + struct drmcgroup_pool_state *pool, *next;
> +
> + mutex_lock(&drmcg_mutex);
> + list_for_each_entry_safe(pool, next, &drmcs->pools, cg_node) {
> + if (!pool->usage_sum) {
> + free_cg_pool_locked(pool);
> + } else {
> + /* Reset all regions, last uncharge will remove pool */
> + set_all_resource_max_limit(pool);
> + }
> + }
> + mutex_unlock(&drmcg_mutex);
> }
>
> static void drmcs_free(struct cgroup_subsys_state *css)
> {
> - struct drm_cgroup_state *drmcs = css_to_drmcs(css);
> + struct drmcgroup_state *drmcs = css_to_drmcs(css);
>
> - if (drmcs != &root_drmcs.drmcs)
> - kfree(drmcs);
> + kfree(drmcs);
> }
>
> static struct cgroup_subsys_state *
> drmcs_alloc(struct cgroup_subsys_state *parent_css)
> {
> - struct drm_cgroup_state *drmcs;
> + struct drmcgroup_state *drmcs = kzalloc(sizeof(*drmcs), GFP_KERNEL);
> + if (!drmcs)
> + return ERR_PTR(-ENOMEM);
> +
> + INIT_LIST_HEAD(&drmcs->pools);
> + return &drmcs->css;
> +}
> +
> +static struct drmcgroup_pool_state *
> +find_cg_pool_locked(struct drmcgroup_state *drmcs, struct drmcgroup_device *dev)
> +{
> + struct drmcgroup_pool_state *pool;
> +
> + list_for_each_entry(pool, &drmcs->pools, cg_node)
> + if (pool->device == dev)
> + return pool;
> +
> + return NULL;
> +}
> +
> +static struct drmcgroup_pool_state *
> +get_cg_pool_locked(struct drmcgroup_state *drmcs, struct drmcgroup_device *dev)
> +{
> + struct drmcgroup_pool_state *pool;
> +
> + pool = find_cg_pool_locked(drmcs, dev);
> + if (pool)
> + return pool;
> +
> + pool = kzalloc(sizeof(*pool), GFP_KERNEL);
> + if (!pool)
> + return ERR_PTR(-ENOMEM);
> +
> + pool->device = dev;
> + set_all_resource_max_limit(pool);
>
> - if (!parent_css) {
> - drmcs = &root_drmcs.drmcs;
> - } else {
> - drmcs = kzalloc(sizeof(*drmcs), GFP_KERNEL);
> - if (!drmcs)
> - return ERR_PTR(-ENOMEM);
> + INIT_LIST_HEAD(&pool->cg_node);
> + INIT_LIST_HEAD(&pool->dev_node);
> + list_add_tail(&pool->cg_node, &drmcs->pools);
> + list_add_tail(&pool->dev_node, &dev->pools);
> + return pool;
> +}
> +
> +void drmcg_unregister_device(struct drmcgroup_device *cgdev)
> +{
> + struct drmcgroup_pool_state *pool, *next;
> +
> + mutex_lock(&drmcg_mutex);
> + list_del(&cgdev->list);
> +
> + list_for_each_entry_safe(pool, next, &cgdev->pools, dev_node)
> + free_cg_pool_locked(pool);
> + mutex_unlock(&drmcg_mutex);
> + kfree(cgdev->name);
> +}
> +
> +EXPORT_SYMBOL_GPL(drmcg_unregister_device);
> +
> +int drmcg_register_device(struct drm_device *dev,
> + struct drmcgroup_device *cgdev)
> +{
> + char *name = kstrdup(dev->unique, GFP_KERNEL);
> + if (!name)
> + return -ENOMEM;
> +
> + INIT_LIST_HEAD(&cgdev->pools);
> + mutex_lock(&drmcg_mutex);
> + cgdev->name = name;
> + list_add_tail(&cgdev->list, &drmcg_devices);
> + mutex_unlock(&drmcg_mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(drmcg_register_device);
> +
> +static int drmcg_max_show(struct seq_file *sf, void *v)
> +{
> + struct drmcgroup_state *drmcs = css_to_drmcs(seq_css(sf));
> + struct drmcgroup_pool_state *pool;
> +
> + mutex_lock(&drmcg_mutex);
> + list_for_each_entry(pool, &drmcs->pools, cg_node) {
> + struct drmcgroup_device *dev = pool->device;
> + int i;
> +
> + seq_puts(sf, dev->name);
> +
> + for (i = 0; i < DRMCG_MAX_REGIONS; i++) {
> + if (!dev->regions[i].name)
> + continue;
> +
> + if (pool->resources[i].max < S64_MAX)
> + seq_printf(sf, " region.%s=%lld", dev->regions[i].name,
> + pool->resources[i].max);
> + else
> + seq_printf(sf, " region.%s=max", dev->regions[i].name);
> + }
> +
> + seq_putc(sf, '\n');
> }
> + mutex_unlock(&drmcg_mutex);
>
> - return &drmcs->css;
> + return 0;
> +}
> +
> +static struct drmcgroup_device *drmcg_get_device_locked(const char *name)
> +{
> + struct drmcgroup_device *dev;
> +
> + lockdep_assert_held(&drmcg_mutex);
> +
> + list_for_each_entry(dev, &drmcg_devices, list)
> + if (!strcmp(name, dev->name))
> + return dev;
> +
> + return NULL;
> +}
> +
> +static void try_to_free_cg_pool_locked(struct drmcgroup_pool_state *pool)
> +{
> + struct drmcgroup_device *dev = pool->device;
> + u32 i;
> +
> + /* Memory charged to this pool */
> + if (pool->usage_sum)
> + return;
> +
> + for (i = 0; i < DRMCG_MAX_REGIONS; i++) {
> + if (!dev->regions[i].name)
> + continue;
> +
> + /* Is a specific limit set? */
> + if (pool->resources[i].max < S64_MAX)
> + return;
> + }
> +
> + /*
> + * No user of the pool and all entries are set to defaults;
> + * safe to delete this pool.
> + */
> + free_cg_pool_locked(pool);
> +}
> +
> +
> +static void
> +uncharge_cg_locked(struct drmcgroup_state *drmcs,
> + struct drmcgroup_device *cgdev,
> + u32 index, u64 size)
> +{
> + struct drmcgroup_pool_state *pool;
> +
> + pool = find_cg_pool_locked(drmcs, cgdev);
> +
> + if (unlikely(!pool)) {
> + pr_warn("Invalid device %p or drm cgroup %p\n", cgdev, drmcs);
> + return;
> + }
> +
> + pool->resources[index].used -= size;
> +
> + /*
> + * A negative count (or overflow) is invalid,
> + * it indicates a bug in the rdma controller.
> + */
> + WARN_ON_ONCE(pool->resources[index].used < 0);
> + pool->usage_sum--;
> + try_to_free_cg_pool_locked(pool);
> +}
> +
> +static void drmcg_uncharge_hierarchy(struct drmcgroup_state *drmcs,
> + struct drmcgroup_device *cgdev,
> + struct drmcgroup_state *stop_cg,
> + u32 index, u64 size)
> +{
> + struct drmcgroup_state *p;
> +
> + mutex_lock(&drmcg_mutex);
> +
> + for (p = drmcs; p != stop_cg; p = parent_drmcg(p))
> + uncharge_cg_locked(p, cgdev, index, size);
> +
> + mutex_unlock(&drmcg_mutex);
> +
> + css_put(&drmcs->css);
> +}
> +
> +void drmcg_uncharge(struct drmcgroup_state *drmcs,
> + struct drmcgroup_device *cgdev,
> + u32 index,
> + u64 size)
> +{
> + if (index >= DRMCG_MAX_REGIONS)
> + return;
> +
> + drmcg_uncharge_hierarchy(drmcs, cgdev, NULL, index, size);
> +}
> +EXPORT_SYMBOL_GPL(drmcg_uncharge);
> +
> +int drmcg_try_charge(struct drmcgroup_state **drmcs,
> + struct drmcgroup_device *cgdev,
> + u32 index,
> + u64 size)
> +{
> + struct drmcgroup_state *cg, *p;
> + struct drmcgroup_pool_state *pool;
> + u64 new;
> + int ret = 0;
> +
> + if (index >= DRMCG_MAX_REGIONS)
> + return -EINVAL;
> +
> + /*
> + * hold on to css, as cgroup can be removed but resource
> + * accounting happens on css.
> + */
> + cg = get_current_drmcg();
1)
I am not familiar with the Xe flows - charging is at the point of actual
backing store allocation?
What about buffer sharing?
Also, given how the css is permanently stored in the caller - you
deliberately decided not to deal with task migrations? I am not sure
that will work. Or maybe just omitted for RFC v1?
2)
Buffer objects which Xe can migrate between memory regions will be
correctly charge/uncharged as they are moved?
Regards,
Tvrtko
> +
> + mutex_lock(&drmcg_mutex);
> + for (p = cg; p; p = parent_drmcg(p)) {
> + pool = get_cg_pool_locked(p, cgdev);
> + if (IS_ERR(pool)) {
> + ret = PTR_ERR(pool);
> + goto err;
> + } else {
> + new = pool->resources[index].used + size;
> + if (new > pool->resources[index].max || new > S64_MAX) {
> + ret = -EAGAIN;
> + goto err;
> + } else {
> + pool->resources[index].used = new;
> + pool->usage_sum++;
> + }
> + }
> + }
> + mutex_unlock(&drmcg_mutex);
> +
> + *drmcs = cg;
> + return 0;
> +
> +err:
> + mutex_unlock(&drmcg_mutex);
> + drmcg_uncharge_hierarchy(cg, cgdev, p, index, size);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(drmcg_try_charge);
> +
> +static s64 parse_resource(char *c, char **retname)
> +{
> + substring_t argstr;
> + char *name, *value = c;
> + size_t len;
> + int ret;
> + u64 retval;
> +
> + name = strsep(&value, "=");
> + if (!name || !value)
> + return -EINVAL;
> +
> + /* Only support region setting for now */
> + if (strncmp(name, "region.", 7))
> + return -EINVAL;
> + else
> + name += 7;
> +
> + *retname = name;
> + len = strlen(value);
> +
> + argstr.from = value;
> + argstr.to = value + len;
> +
> + ret = match_u64(&argstr, &retval);
> + if (ret >= 0) {
> + if (retval > S64_MAX)
> + return -EINVAL;
> + return retval;
> + }
> + if (!strncmp(value, "max", len))
> + return S64_MAX;
> +
> + /* Not u64 or max, error */
> + return -EINVAL;
> +}
> +
> +static int drmcg_parse_limits(char *options,
> + u64 *limits, char **enables)
> +{
> + char *c;
> + int num_limits = 0;
> +
> + /* parse resource options */
> + while ((c = strsep(&options, " ")) != NULL) {
> + s64 limit;
> +
> + if (num_limits >= DRMCG_MAX_REGIONS)
> + return -EINVAL;
> +
> + limit = parse_resource(c, &enables[num_limits]);
> + if (limit < 0)
> + return limit;
> +
> + limits[num_limits++] = limit;
> + }
> + return num_limits;
> +}
> +
> +static ssize_t drmcg_max_write(struct kernfs_open_file *of,
> + char *buf, size_t nbytes, loff_t off)
> +{
> + struct drmcgroup_state *drmcs = css_to_drmcs(of_css(of));
> + struct drmcgroup_device *dev;
> + struct drmcgroup_pool_state *pool;
> + char *options = strstrip(buf);
> + char *dev_name = strsep(&options, " ");
> + u64 limits[DRMCG_MAX_REGIONS];
> + u64 new_limits[DRMCG_MAX_REGIONS];
> + char *regions[DRMCG_MAX_REGIONS];
> + int num_limits, i;
> + unsigned long set_mask = 0;
> + int err = 0;
> +
> + if (!dev_name)
> + return -EINVAL;
> +
> + num_limits = drmcg_parse_limits(options, limits, regions);
> + if (num_limits < 0)
> + return num_limits;
> + if (!num_limits)
> + return -EINVAL;
> +
> + /*
> + * Everything is parsed into key=value pairs now, take lock and attempt to update
> + * For good measure, set -EINVAL when a key is set twice.
> + */
> + mutex_lock(&drmcg_mutex);
> +
> + dev = drmcg_get_device_locked(dev_name);
> + if (!dev) {
> + err = -ENODEV;
> + goto err;
> + }
> +
> + pool = get_cg_pool_locked(drmcs, dev);
> + if (IS_ERR(pool)) {
> + err = PTR_ERR(pool);
> + goto err;
> + }
> +
> + /* Lookup region names and set new_limits to the index */
> + for (i = 0; i < num_limits; i++) {
> + int j;
> +
> + for (j = 0; j < DRMCG_MAX_REGIONS; j++)
> + if (dev->regions[j].name &&
> + !strcmp(regions[i], dev->regions[j].name))
> + break;
> +
> + if (j == DRMCG_MAX_REGIONS ||
> + set_mask & BIT(j)) {
> + err = -EINVAL;
> + goto err_put;
> + }
> +
> + set_mask |= BIT(j);
> + new_limits[j] = limits[i];
> + }
> +
> + /* And commit */
> + for_each_set_bit(i, &set_mask, DRMCG_MAX_REGIONS)
> + set_resource_max(pool, i, new_limits[i]);
> +
> +err_put:
> + try_to_free_cg_pool_locked(pool);
> +err:
> + mutex_unlock(&drmcg_mutex);
> +
> + return err ?: nbytes;
> +}
> +
> +static int drmcg_current_show(struct seq_file *sf, void *v)
> +{
> + struct drmcgroup_state *drmcs = css_to_drmcs(seq_css(sf));
> + struct drmcgroup_device *dev;
> +
> + mutex_lock(&drmcg_mutex);
> + list_for_each_entry(dev, &drmcg_devices, list) {
> + struct drmcgroup_pool_state *pool = find_cg_pool_locked(drmcs, dev);
> + int i;
> +
> + seq_puts(sf, dev->name);
> +
> + for (i = 0; i < DRMCG_MAX_REGIONS; i++) {
> + if (!dev->regions[i].name)
> + continue;
> +
> + seq_printf(sf, " region.%s=%lld", dev->regions[i].name,
> + pool ? pool->resources[i].used : 0ULL);
> + }
> +
> + seq_putc(sf, '\n');
> + }
> + mutex_unlock(&drmcg_mutex);
> +
> + return 0;
> +}
> +
> +static int drmcg_capacity_show(struct seq_file *sf, void *v)
> +{
> + struct drmcgroup_device *dev;
> + int i;
> +
> + list_for_each_entry(dev, &drmcg_devices, list) {
> + seq_puts(sf, dev->name);
> + for (i = 0; i < DRMCG_MAX_REGIONS; i++)
> + if (dev->regions[i].name)
> + seq_printf(sf, " region.%s=%lld",
> + dev->regions[i].name,
> + dev->regions[i].size);
> + seq_putc(sf, '\n');
> + }
> + return 0;
> }
>
> -struct cftype files[] = {
> +static struct cftype files[] = {
> + {
> + .name = "max",
> + .write = drmcg_max_write,
> + .seq_show = drmcg_max_show,
> + .flags = CFTYPE_NOT_ON_ROOT,
> + },
> + {
> + .name = "current",
> + .seq_show = drmcg_current_show,
> + .flags = CFTYPE_NOT_ON_ROOT,
> + },
> + {
> + .name = "capacity",
> + .seq_show = drmcg_capacity_show,
> + .flags = CFTYPE_ONLY_ON_ROOT,
> + },
> { } /* Zero entry terminates. */
> };
>
> struct cgroup_subsys drm_cgrp_subsys = {
> .css_alloc = drmcs_alloc,
> .css_free = drmcs_free,
> - .early_init = false,
> + .css_offline = drmcs_offline,
> .legacy_cftypes = files,
> .dfl_cftypes = files,
> };
More information about the Intel-xe
mailing list