[PATCH v2 6/7] drm/crtc-helper: switch to drm device based logging and warns
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Apr 8 12:38:33 UTC 2024
On Mon, Apr 08, 2024 at 12:24:01PM +0300, Jani Nikula wrote:
> Prefer drm device based drm_dbg_kms(), drm_err(), drm_WARN_ON() over
> DRM_DEBUG_KMS(), DRM_ERROR(), and WARN_ON(). Also update encoder,
> connector, and crtc logging to include the object id and name, where
> possible.
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/drm_crtc_helper.c | 95 +++++++++++++++++--------------
> 1 file changed, 52 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
> index 2dafc39a27cb..af7ac9d9192a 100644
> --- a/drivers/gpu/drm/drm_crtc_helper.c
> +++ b/drivers/gpu/drm/drm_crtc_helper.c
> @@ -110,15 +110,15 @@ bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
> struct drm_connector_list_iter conn_iter;
> struct drm_device *dev = encoder->dev;
>
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> /*
> * We can expect this mutex to be locked if we are not panicking.
> * Locking is currently fubar in the panic handler.
> */
> if (!oops_in_progress) {
> - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
> - WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
> + drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
> + drm_WARN_ON(dev, !drm_modeset_is_locked(&dev->mode_config.connection_mutex));
Someone could do a followup to convert this stuff over to
lockdep_assert_held().
> }
>
>
> @@ -150,14 +150,14 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
> struct drm_encoder *encoder;
> struct drm_device *dev = crtc->dev;
>
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> /*
> * We can expect this mutex to be locked if we are not panicking.
> * Locking is currently fubar in the panic handler.
> */
> if (!oops_in_progress)
> - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
> + drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
>
> drm_for_each_encoder(encoder, dev)
> if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
> @@ -230,7 +230,7 @@ static void __drm_helper_disable_unused_functions(struct drm_device *dev)
> */
> void drm_helper_disable_unused_functions(struct drm_device *dev)
> {
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> drm_modeset_lock_all(dev);
> __drm_helper_disable_unused_functions(dev);
> @@ -294,7 +294,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
> struct drm_encoder *encoder;
> bool ret = true;
>
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> drm_warn_on_modeset_not_all_locked(dev);
>
> @@ -338,7 +338,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
> if (encoder_funcs->mode_fixup) {
> if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
> adjusted_mode))) {
> - DRM_DEBUG_KMS("Encoder fixup failed\n");
> + drm_dbg_kms(dev, "[ENCODER:%d:%s] mode fixup failed\n",
> + encoder->base.id, encoder->name);
> goto done;
> }
> }
> @@ -347,11 +348,12 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
> if (crtc_funcs->mode_fixup) {
> if (!(ret = crtc_funcs->mode_fixup(crtc, mode,
> adjusted_mode))) {
> - DRM_DEBUG_KMS("CRTC fixup failed\n");
> + drm_dbg_kms(dev, "[CRTC:%d:%s] mode fixup failed\n",
> + crtc->base.id, crtc->name);
> goto done;
> }
> }
> - DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
> + drm_dbg_kms(dev, "[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
>
> drm_mode_copy(&crtc->hwmode, adjusted_mode);
>
> @@ -390,8 +392,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
> if (!encoder_funcs)
> continue;
>
> - DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%s]\n",
> - encoder->base.id, encoder->name, mode->name);
> + drm_dbg_kms(dev, "[ENCODER:%d:%s] set [MODE:%s]\n",
> + encoder->base.id, encoder->name, mode->name);
> if (encoder_funcs->mode_set)
> encoder_funcs->mode_set(encoder, mode, adjusted_mode);
> }
> @@ -503,7 +505,7 @@ drm_connector_get_single_encoder(struct drm_connector *connector)
> {
> struct drm_encoder *encoder;
>
> - WARN_ON(hweight32(connector->possible_encoders) > 1);
> + drm_WARN_ON(connector->dev, hweight32(connector->possible_encoders) > 1);
> drm_connector_for_each_possible_encoder(connector, encoder)
> return encoder;
>
> @@ -564,8 +566,6 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> int ret;
> int i;
>
> - DRM_DEBUG_KMS("\n");
> -
> BUG_ON(!set);
> BUG_ON(!set->crtc);
> BUG_ON(!set->crtc->helper_private);
> @@ -577,19 +577,22 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> crtc_funcs = set->crtc->helper_private;
>
> dev = set->crtc->dev;
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> +
> + drm_dbg_kms(dev, "\n");
That looks rather redundant as we print something below anyway.
Could drop this as a followup I guess.
This patch looks fine regardless
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> +
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> if (!set->mode)
> set->fb = NULL;
>
> if (set->fb) {
> - DRM_DEBUG_KMS("[CRTC:%d:%s] [FB:%d] #connectors=%d (x y) (%i %i)\n",
> - set->crtc->base.id, set->crtc->name,
> - set->fb->base.id,
> - (int)set->num_connectors, set->x, set->y);
> + drm_dbg_kms(dev, "[CRTC:%d:%s] [FB:%d] #connectors=%d (x y) (%i %i)\n",
> + set->crtc->base.id, set->crtc->name,
> + set->fb->base.id,
> + (int)set->num_connectors, set->x, set->y);
> } else {
> - DRM_DEBUG_KMS("[CRTC:%d:%s] [NOFB]\n",
> - set->crtc->base.id, set->crtc->name);
> + drm_dbg_kms(dev, "[CRTC:%d:%s] [NOFB]\n",
> + set->crtc->base.id, set->crtc->name);
> drm_crtc_helper_disable(set->crtc);
> return 0;
> }
> @@ -639,7 +642,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> if (set->crtc->primary->fb != set->fb) {
> /* If we have no fb then treat it as a full mode set */
> if (set->crtc->primary->fb == NULL) {
> - DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
> + drm_dbg_kms(dev, "[CRTC:%d:%s] no fb, full mode set\n",
> + set->crtc->base.id, set->crtc->name);
> mode_changed = true;
> } else if (set->fb->format != set->crtc->primary->fb->format) {
> mode_changed = true;
> @@ -651,7 +655,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> fb_changed = true;
>
> if (!drm_mode_equal(set->mode, &set->crtc->mode)) {
> - DRM_DEBUG_KMS("modes are different, full mode set\n");
> + drm_dbg_kms(dev, "[CRTC:%d:%s] modes are different, full mode set:\n",
> + set->crtc->base.id, set->crtc->name);
> drm_mode_debug_printmodeline(&set->crtc->mode);
> drm_mode_debug_printmodeline(set->mode);
> mode_changed = true;
> @@ -687,7 +692,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> fail = 1;
>
> if (connector->dpms != DRM_MODE_DPMS_ON) {
> - DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] DPMS not on, full mode switch\n",
> + connector->base.id, connector->name);
> mode_changed = true;
> }
>
> @@ -696,7 +702,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> }
>
> if (new_encoder != connector->encoder) {
> - DRM_DEBUG_KMS("encoder changed, full mode switch\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] encoder changed, full mode switch\n",
> + connector->base.id, connector->name);
> mode_changed = true;
> /* If the encoder is reused for another connector, then
> * the appropriate crtc will be set later.
> @@ -737,17 +744,18 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> goto fail;
> }
> if (new_crtc != connector->encoder->crtc) {
> - DRM_DEBUG_KMS("crtc changed, full mode switch\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] CRTC changed, full mode switch\n",
> + connector->base.id, connector->name);
> mode_changed = true;
> connector->encoder->crtc = new_crtc;
> }
> if (new_crtc) {
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d:%s]\n",
> - connector->base.id, connector->name,
> - new_crtc->base.id, new_crtc->name);
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] to [CRTC:%d:%s]\n",
> + connector->base.id, connector->name,
> + new_crtc->base.id, new_crtc->name);
> } else {
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
> - connector->base.id, connector->name);
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] to [NOCRTC]\n",
> + connector->base.id, connector->name);
> }
> }
> drm_connector_list_iter_end(&conn_iter);
> @@ -758,23 +766,24 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
>
> if (mode_changed) {
> if (drm_helper_crtc_in_use(set->crtc)) {
> - DRM_DEBUG_KMS("attempting to set mode from"
> - " userspace\n");
> + drm_dbg_kms(dev, "[CRTC:%d:%s] attempting to set mode from userspace\n",
> + set->crtc->base.id, set->crtc->name);
> drm_mode_debug_printmodeline(set->mode);
> set->crtc->primary->fb = set->fb;
> if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
> set->x, set->y,
> save_set.fb)) {
> - DRM_ERROR("failed to set mode on [CRTC:%d:%s]\n",
> - set->crtc->base.id, set->crtc->name);
> + drm_err(dev, "[CRTC:%d:%s] failed to set mode\n",
> + set->crtc->base.id, set->crtc->name);
> set->crtc->primary->fb = save_set.fb;
> ret = -EINVAL;
> goto fail;
> }
> - DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
> + drm_dbg_kms(dev, "[CRTC:%d:%s] Setting connector DPMS state to on\n",
> + set->crtc->base.id, set->crtc->name);
> for (i = 0; i < set->num_connectors; i++) {
> - DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
> - set->connectors[i]->name);
> + drm_dbg_kms(dev, "\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
> + set->connectors[i]->name);
> set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
> }
> }
> @@ -823,7 +832,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set,
> if (mode_changed &&
> !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
> save_set.y, save_set.fb))
> - DRM_ERROR("failed to restore config after modeset failure\n");
> + drm_err(dev, "failed to restore config after modeset failure\n");
>
> kfree(save_connector_encoders);
> kfree(save_encoder_crtcs);
> @@ -905,7 +914,7 @@ int drm_helper_connector_dpms(struct drm_connector *connector, int mode)
> struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
> int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF;
>
> - WARN_ON(drm_drv_uses_atomic_modeset(connector->dev));
> + drm_WARN_ON(connector->dev, drm_drv_uses_atomic_modeset(connector->dev));
>
> if (mode == connector->dpms)
> return 0;
> @@ -980,7 +989,7 @@ void drm_helper_resume_force_mode(struct drm_device *dev)
> int encoder_dpms;
> bool ret;
>
> - WARN_ON(drm_drv_uses_atomic_modeset(dev));
> + drm_WARN_ON(dev, drm_drv_uses_atomic_modeset(dev));
>
> drm_modeset_lock_all(dev);
> drm_for_each_crtc(crtc, dev) {
> @@ -993,7 +1002,7 @@ void drm_helper_resume_force_mode(struct drm_device *dev)
>
> /* Restoring the old config should never fail! */
> if (ret == false)
> - DRM_ERROR("failed to set mode on crtc %p\n", crtc);
> + drm_err(dev, "failed to set mode on crtc %p\n", crtc);
>
> /* Turn off outputs that were already powered off */
> if (drm_helper_choose_crtc_dpms(crtc)) {
> --
> 2.39.2
--
Ville Syrjälä
Intel
More information about the Intel-xe
mailing list