[PATCH v5 5/5] drm/xe: Refactor default device atomic settings

Souza, Jose jose.souza at intel.com
Mon Apr 29 13:46:29 UTC 2024


On Mon, 2024-04-29 at 11:05 +0200, Nirmoy Das wrote:
> Hi Jose,
> 
> On 4/26/2024 11:04 PM, Souza, Jose wrote:
> > On Fri, 2024-04-26 at 12:56 +0200, Nirmoy Das wrote:
> > > The default behavior of device atomics depends on the
> > > VM type and buffer allocation types. Device atomics are
> > > expected to function with all types of allocations for
> > > traditional applications/APIs. Additionally, in compute/SVM
> > > API scenarios with fault mode or LR mode VMs, device atomics
> > > must work with single-region allocations. In all other cases
> > > device atomics should be disabled by default also on platforms
> > > where we know device atomics doesn't on work on particular
> > > allocations types.
> > > 
> > > v2: Fix platform checks to correct atomics behaviour on PVC.
> > > 
> > > Signed-off-by: Nirmoy Das <nirmoy.das at intel.com>
> > > ---
> > >   drivers/gpu/drm/xe/xe_pt.c | 27 ++++++++++++++++++++++++---
> > >   drivers/gpu/drm/xe/xe_vm.c |  2 +-
> > >   2 files changed, 25 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/xe/xe_pt.c b/drivers/gpu/drm/xe/xe_pt.c
> > > index 5b7930f46cf3..237e4a4985a4 100644
> > > --- a/drivers/gpu/drm/xe/xe_pt.c
> > > +++ b/drivers/gpu/drm/xe/xe_pt.c
> > > @@ -619,9 +619,30 @@ xe_pt_stage_bind(struct xe_tile *tile, struct xe_vma *vma,
> > >   	struct xe_pt *pt = xe_vma_vm(vma)->pt_root[tile->id];
> > >   	int ret;
> > >   
> > > -	if ((vma->gpuva.flags & XE_VMA_ATOMIC_PTE_BIT) &&
> > > -	    (is_devmem || !IS_DGFX(xe)))
> > > -		xe_walk.default_pte |= XE_USM_PPGTT_PTE_AE;
> > > +	/**
> > > +	 * Default atomic expectations for different allocation scenarios are as follows:
> > > +	 *
> > > +	 * 1. Traditional API: When the VM is not in fault mode or LR mode:
> > > +	 *    - Device atomics are expected to function with all allocations.
> > > +	 *
> > > +	 * 2. Compute/SVM API: When the VM is either in fault mode or LR mode:
> > > +	 *    - Device atomics are the default behavior when the bo is placed in a single region.
> > > +	 *    - In all other cases device atomics will be disabled with AE=0 until an application
> > > +	 *      request differently using a ioctl like madvise.
> > > +	 */
> > > +	if (vma->gpuva.flags & XE_VMA_ATOMIC_PTE_BIT) {
> > > +		if (xe_vm_in_fault_mode(xe_vma_vm(vma)) ||
> > > +		    xe_vm_in_lr_mode(xe_vma_vm(vma))) {
> > nit: xe_vm_in_fault_mode requires xe_vm_in_lr_mode, so you can just check for the later.
> 
> Will do that. I think scratch page is also part of non-traditional API, 
> I will confirm that and add that if needed.

I think Mesa is the only driver that uses scratch patch.

> 
> 
> Thanks,
> 
> Nirmoy
> 
> > 
> > > +			if (bo && xe_bo_has_single_placement(bo))
> > > +				xe_walk.default_pte |= XE_USM_PPGTT_PTE_AE;
> > > +		} else {
> > > +			xe_walk.default_pte |= XE_USM_PPGTT_PTE_AE;
> > > +		}
> > > +
> > > +		/* Unset AE if the platform(PVC) doesn't support it */
> > > +		if (!xe->info.has_device_atomics_on_smem && !is_devmem)
> > > +			xe_walk.default_pte &= ~XE_USM_PPGTT_PTE_AE;
> > > +	}
> > >   
> > >   	if (is_devmem) {
> > >   		xe_walk.default_pte |= XE_PPGTT_PTE_DM;
> > > diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c
> > > index 8fc37c5a0196..f795016a80d5 100644
> > > --- a/drivers/gpu/drm/xe/xe_vm.c
> > > +++ b/drivers/gpu/drm/xe/xe_vm.c
> > > @@ -805,7 +805,7 @@ static struct xe_vma *xe_vma_create(struct xe_vm *vm,
> > >   	for_each_tile(tile, vm->xe, id)
> > >   		vma->tile_mask |= 0x1 << id;
> > >   
> > > -	if (GRAPHICS_VER(vm->xe) >= 20 || vm->xe->info.platform == XE_PVC)
> > > +	if (vm->xe->info.has_atomic_enable_pte_bit)
> > >   		vma->gpuva.flags |= XE_VMA_ATOMIC_PTE_BIT;
> > >   
> > >   	vma->pat_index = pat_index;



More information about the Intel-xe mailing list