[PULL] drm-xe-next
Daniel Vetter
daniel.vetter at ffwll.ch
Tue Aug 27 10:51:41 UTC 2024
On Thu, Aug 22, 2024 at 03:55:23PM -0500, Lucas De Marchi wrote:
> Hi Dave and Sima,
>
> Second drm-xe-next pull request for the 6.12 cycle.
>
> Several fixes here that are also going through drm-xe-fixes. Most of the
> other changes are the missing bits for Xe2 (LNL and BMG) and general
> refactors.
>
> The only UAPI change is actually a fix for building with gcc 5.
>
> I left some commits out since they were too fresh and I didn't have core
> CI results for them. Plan is to send the final pull request for 6.12
> next week with those commits.
>
> thanks
> Lucas De Marchi
>
> drm-xe-next-2024-08-22:
> UAPI Changes:
> - Fix OA format masks which were breaking build with gcc-5
>
> Cross-subsystem Changes:
> - drm/ttm: Add a flag to allow drivers to skip clear-on-free
There's a revert floating around for that, and I don't like pull that
temporary state into drm-next since a bunch of people explicitly asked for
drm-next to catch up so they can do backmerges. Can you pls do a new pull
where that revert is included? Incremental changelog is fine, I can apply
them both back-to-back.
Thanks, Sima
>
> Driver Changes:
> - Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
> - Refactor hw engine lookup and mmio access to be used in more places
> (Dominik, Matt Auld, Mika Kuoppala)
> - Enable priority mem read for Xe2 and later (Pallavi Mishra)
> - Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
> - Fix refcount and speedup devcoredump (Matthew Brost)
> - Add performance tuning changes to Xe2 (Akshata, Shekhar)
> - Fix OA sysfs entry (Ashutosh)
> - Add first GuC firmware support for BMG (Julia)
> - Bump minimum GuC firmware for platforms under force_probe to match LNL
> and BMG (Julia)
> - Fix access check on user fence creation (Nirmoy)
> - Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
> - Document workaround and use proper WA infra (Matt Roper)
> - Fix VF configuration on media GT (Michal Wajdeczko)
> - Fix VM dma-resv lock (Matthew Brost)
> - Allow suspend/resume exec queue backend op to be called multiple times
> (Matthew Brost)
> - Add GT stats to debugfs (Nirmoy)
> - Add hwconfig to debugfs (Matt Roper)
> - Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
> - Offload system clear page to GPU (Nirmoy)
> - Remove dead kunit code (Jani Nikula)
> - Refactor drvdata storing to help display (Jani Nikula)
> - Cleanup unsused xe parameter in pte handling (Himal)
> - Rename s/enable_display/probe_display/ for clarity (Lucas)
> - Fix missing MCR annotation in couple of registers (Tejas)
> - Fix DGFX display suspend/resume (Maarten)
> - Prepare exec_queue_kill for PXP handling (Daniele)
> - Fix devm/drmm issues (Daniele, Matthew Brost)
> - Fix tile fini sequence (Brost)
> - Fix crashes when probing without firmware in place (Daniele)
> - Use xe_managed for kernel BOs (Daniele, Matthew Brost)
> - Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
> - Use reserved copy engine for user binds on faulting devices
> (Matthew Brost)
> - Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
> - Cleanup redundant arg when creating use BO (Nirmoy)
> - Prevent UAF around preempt fence (Auld)
> - Fix display suspend/resume (Maarten)
> - Use vma_pages() helper (Thorsten)
> The following changes since commit a809b92ee0f84c3f655b16a8b4d04bc3665d954a:
>
> Merge tag 'drm-intel-next-2024-08-13' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next (2024-08-16 12:56:42 +1000)
>
> are available in the Git repository at:
>
> https://gitlab.freedesktop.org/drm/xe/kernel.git tags/drm-xe-next-2024-08-22
>
> for you to fetch changes up to 23683061805be368c8d1c7e7ff52abc470cac275:
>
> drm/xe/lnl: Offload system clear page activity to GPU (2024-08-19 17:49:00 +0200)
>
> ----------------------------------------------------------------
> UAPI Changes:
> - Fix OA format masks which were breaking build with gcc-5
>
> Cross-subsystem Changes:
> - drm/ttm: Add a flag to allow drivers to skip clear-on-free
>
> Driver Changes:
> - Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
> - Refactor hw engine lookup and mmio access to be used in more places
> (Dominik, Matt Auld, Mika Kuoppala)
> - Enable priority mem read for Xe2 and later (Pallavi Mishra)
> - Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
> - Fix refcount and speedup devcoredump (Matthew Brost)
> - Add performance tuning changes to Xe2 (Akshata, Shekhar)
> - Fix OA sysfs entry (Ashutosh)
> - Add first GuC firmware support for BMG (Julia)
> - Bump minimum GuC firmware for platforms under force_probe to match LNL
> and BMG (Julia)
> - Fix access check on user fence creation (Nirmoy)
> - Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
> - Document workaround and use proper WA infra (Matt Roper)
> - Fix VF configuration on media GT (Michal Wajdeczko)
> - Fix VM dma-resv lock (Matthew Brost)
> - Allow suspend/resume exec queue backend op to be called multiple times
> (Matthew Brost)
> - Add GT stats to debugfs (Nirmoy)
> - Add hwconfig to debugfs (Matt Roper)
> - Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
> - Offload system clear page to GPU (Nirmoy)
> - Remove dead kunit code (Jani Nikula)
> - Refactor drvdata storing to help display (Jani Nikula)
> - Cleanup unsused xe parameter in pte handling (Himal)
> - Rename s/enable_display/probe_display/ for clarity (Lucas)
> - Fix missing MCR annotation in couple of registers (Tejas)
> - Fix DGFX display suspend/resume (Maarten)
> - Prepare exec_queue_kill for PXP handling (Daniele)
> - Fix devm/drmm issues (Daniele, Matthew Brost)
> - Fix tile fini sequence (Brost)
> - Fix crashes when probing without firmware in place (Daniele)
> - Use xe_managed for kernel BOs (Daniele, Matthew Brost)
> - Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
> - Use reserved copy engine for user binds on faulting devices
> (Matthew Brost)
> - Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
> - Cleanup redundant arg when creating use BO (Nirmoy)
> - Prevent UAF around preempt fence (Auld)
> - Fix display suspend/resume (Maarten)
> - Use vma_pages() helper (Thorsten)
>
> ----------------------------------------------------------------
> Akshata Jahagirdar (1):
> drm/xe/xe2: Introduce performance changes
>
> Ashutosh Dixit (1):
> drm/xe/observation: Drop empty sysctl table entry
>
> Daniele Ceraolo Spurio (5):
> drm/xe: fix WA 14018094691
> drm/xe: Make exec_queue_kill safe to call twice
> drm/xe: use devm instead of drmm for managed bo
> drm/xe/uc: Use managed bo for HuC and GSC objects
> drm/xe/uc: Use devm to register cleanup that includes exec_queues
>
> Dominik Grzegorzek (2):
> drm/xe: Move and export xe_hw_engine lookup.
> drm/xe: Export xe_hw_engine's mmio accessors
>
> Francois Dugast (11):
> drm/xe/hw_engine_group: Introduce xe_hw_engine_group
> drm/xe/guc_submit: Make suspend_wait interruptible
> 'drm/xe/hw_engine_group: Register hw engine group's exec queues
> drm/xe/hw_engine_group: Add helper to suspend faulting LR jobs
> drm/xe/exec_queue: Remove duplicated code
> drm/xe/exec_queue: Prepare last fence for hw engine group resume context
> drm/xe/hw_engine_group: Add helper to wait for dma fence jobs
> drm/xe/hw_engine_group: Ensure safe transition between execution modes
> drm/xe/exec: Switch hw engine group execution mode upon job submission
> drm/xe/vm: Remove restriction that all VMs must be faulting if one is
> drm/xe/device: Remove unused xe_device::usm::num_vm_in_*
>
> Himal Prasad Ghimiray (1):
> drm/xe: Remove unused xe parameter
>
> Jani Nikula (3):
> drm/xe/tests: remove unused leftover xe_call_for_each_device()
> drm/xe: use pdev_to_xe_device() instead of pci_get_drvdata() directly
> drm/xe: add kdev_to_xe_device() helper and use it
>
> Julia Filipchuk (3):
> drm/xe/guc: Bump minimum required GuC version to v70.29.2
> drm/xe/guc: Define GuC version v70.29.2 for BMG
> drm/xe/guc: Enable w/a 14022293748 and 22019794406
>
> Karthik Poosa (1):
> drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
>
> Lucas De Marchi (3):
> drm/xe: Allow to compile out debugfs
> drm/xe: Rename enable_display module param
> Merge drm/drm-next into drm-xe-next
>
> Maarten Lankhorst (2):
> drm/xe/display: Match i915 driver suspend/resume sequences better
> drm/xe/display: Make display suspend/resume work on discrete
>
> Matt Roper (3):
> drm/xe: Name and document Wa_14019789679
> drm/xe: Add debugfs to dump GuC's hwconfig
> drm/xe/mcr: Try to derive dss_per_grp from hwconfig attributes
>
> Matthew Auld (2):
> drm/xe: fix engine_class bounds check again
> drm/xe: prevent UAF around preempt fence
>
> Matthew Brost (14):
> drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
> drm/xe: Take ref to VM in delayed snapshot
> drm/printer: Allow NULL data in devcoredump printer
> drm/xe: Faster devcoredump
> drm/xe: Only check last fence on user binds
> drm/xe: Move VM dma-resv lock from xe_exec_queue_create to __xe_exec_queue_init
> drm/xe: Add xe_sched_msg_lock/unlock helper
> drm/xe: Reinit msg link when processing a message
> drm/xe: Add xe_sched_add_msg_locked helper
> drm/xe: Only enable scheduling upon resume if needed
> drm/xe: Allow suspend / resume to be safely called multiple times
> drm/xe: Fix tile fini sequence
> drm/xe: Use for_each_remote_tile rather than manual check
> drm/xe: Use reserved copy engine for user binds on faulting devices
>
> Michal Wajdeczko (1):
> drm/xe/pf: Fix VF config validation on multi-GT platforms
>
> Mika Kuoppala (1):
> drm/xe: Add kernel doc for xe_hw_engine_lookup
>
> Nirmoy Das (7):
> drm/xe: Fix access_ok check in user_fence_create
> drm/xe/gt: Add APIs for printing stats over debugfs
> drm/xe: Add stats for tlb invalidation count
> drm/xe/migrate: Parameterize ccs and bo data clear in xe_migrate_clear()
> drm/xe: Remove redundant param from xe_bo_create_user
> drm/ttm: Add a flag to allow drivers to skip clear-on-free
> drm/xe/lnl: Offload system clear page activity to GPU
>
> Pallavi Mishra (1):
> drm/xe/xe2: Enable Priority Mem Read
>
> Shekhar Chauhan (1):
> drm/xe/xe2: Add performance turning changes
>
> Tejas Upadhyay (4):
> drm/xe/xe2hpg: Add Wa_14021821874
> drm/xe: Move enable host l2 VRAM post MCR init
> drm/xe: Write all slices if its mcr register
> drm/xe: Define STATELESS_COMPRESSION_CTRL as mcr register
>
> Thorsten Blum (1):
> drm/xe/oa: Use vma_pages() helper function in xe_oa_mmap()
>
> drivers/gpu/drm/drm_print.c | 13 +-
> drivers/gpu/drm/ttm/ttm_pool.c | 18 +-
> drivers/gpu/drm/xe/Makefile | 18 +-
> drivers/gpu/drm/xe/abi/guc_klvs_abi.h | 1 +
> drivers/gpu/drm/xe/display/xe_display.c | 88 ++++--
> drivers/gpu/drm/xe/regs/xe_engine_regs.h | 1 +
> drivers/gpu/drm/xe/regs/xe_gt_regs.h | 10 +-
> drivers/gpu/drm/xe/tests/xe_bo.c | 8 +-
> drivers/gpu/drm/xe/tests/xe_dma_buf.c | 2 +-
> drivers/gpu/drm/xe/tests/xe_migrate.c | 24 +-
> drivers/gpu/drm/xe/tests/xe_pci.c | 52 ----
> drivers/gpu/drm/xe/tests/xe_pci_test.h | 1 -
> drivers/gpu/drm/xe/xe_bo.c | 48 +++-
> drivers/gpu/drm/xe/xe_bo.h | 1 -
> drivers/gpu/drm/xe/xe_debugfs.h | 4 +
> drivers/gpu/drm/xe/xe_devcoredump.c | 111 +++++---
> drivers/gpu/drm/xe/xe_devcoredump_types.h | 8 +
> drivers/gpu/drm/xe/xe_device.c | 5 +-
> drivers/gpu/drm/xe/xe_device.h | 15 +-
> drivers/gpu/drm/xe/xe_device_types.h | 17 +-
> drivers/gpu/drm/xe/xe_exec.c | 20 +-
> drivers/gpu/drm/xe/xe_exec_queue.c | 237 ++++++++--------
> drivers/gpu/drm/xe/xe_exec_queue.h | 8 +-
> drivers/gpu/drm/xe/xe_exec_queue_types.h | 4 +-
> drivers/gpu/drm/xe/xe_gpu_scheduler.c | 23 +-
> drivers/gpu/drm/xe/xe_gpu_scheduler.h | 12 +
> drivers/gpu/drm/xe/xe_gsc.c | 20 +-
> drivers/gpu/drm/xe/xe_gsc_proxy.c | 45 +---
> drivers/gpu/drm/xe/xe_gt.c | 10 +-
> drivers/gpu/drm/xe/xe_gt_debugfs.c | 13 +
> drivers/gpu/drm/xe/xe_gt_mcr.c | 40 ++-
> drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 11 +-
> drivers/gpu/drm/xe/xe_gt_stats.c | 49 ++++
> drivers/gpu/drm/xe/xe_gt_stats.h | 29 ++
> drivers/gpu/drm/xe/xe_gt_tlb_invalidation.c | 2 +
> drivers/gpu/drm/xe/xe_gt_types.h | 15 ++
> drivers/gpu/drm/xe/xe_guc.h | 10 +
> drivers/gpu/drm/xe/xe_guc_ads.c | 6 +
> drivers/gpu/drm/xe/xe_guc_hwconfig.c | 97 +++++++
> drivers/gpu/drm/xe/xe_guc_hwconfig.h | 3 +
> drivers/gpu/drm/xe/xe_guc_submit.c | 62 +++--
> drivers/gpu/drm/xe/xe_huc.c | 19 +-
> drivers/gpu/drm/xe/xe_hw_engine.c | 145 +++++++---
> drivers/gpu/drm/xe/xe_hw_engine.h | 10 +
> drivers/gpu/drm/xe/xe_hw_engine_group.c | 372 ++++++++++++++++++++++++++
> drivers/gpu/drm/xe/xe_hw_engine_group.h | 29 ++
> drivers/gpu/drm/xe/xe_hw_engine_group_types.h | 51 ++++
> drivers/gpu/drm/xe/xe_hw_engine_types.h | 2 +
> drivers/gpu/drm/xe/xe_hwmon.c | 3 +-
> drivers/gpu/drm/xe/xe_lrc.c | 50 +++-
> drivers/gpu/drm/xe/xe_migrate.c | 29 +-
> drivers/gpu/drm/xe/xe_migrate.h | 7 +-
> drivers/gpu/drm/xe/xe_mmio.c | 4 +-
> drivers/gpu/drm/xe/xe_module.c | 6 +-
> drivers/gpu/drm/xe/xe_module.h | 2 +-
> drivers/gpu/drm/xe/xe_oa.c | 3 +-
> drivers/gpu/drm/xe/xe_observation.c | 1 -
> drivers/gpu/drm/xe/xe_pci.c | 10 +-
> drivers/gpu/drm/xe/xe_pm.c | 11 +-
> drivers/gpu/drm/xe/xe_preempt_fence.c | 3 +-
> drivers/gpu/drm/xe/xe_preempt_fence_types.h | 2 +
> drivers/gpu/drm/xe/xe_pt.c | 10 +-
> drivers/gpu/drm/xe/xe_sync.c | 4 +-
> drivers/gpu/drm/xe/xe_ttm_sys_mgr.c | 12 +
> drivers/gpu/drm/xe/xe_tuning.c | 13 +-
> drivers/gpu/drm/xe/xe_uc_fw.c | 28 +-
> drivers/gpu/drm/xe/xe_vm.c | 53 +---
> drivers/gpu/drm/xe/xe_wa.c | 4 +
> drivers/gpu/drm/xe/xe_wa_oob.rules | 6 +
> include/drm/drm_print.h | 54 +++-
> include/drm/ttm/ttm_tt.h | 6 +-
> 71 files changed, 1585 insertions(+), 525 deletions(-)
> create mode 100644 drivers/gpu/drm/xe/xe_gt_stats.c
> create mode 100644 drivers/gpu/drm/xe/xe_gt_stats.h
> create mode 100644 drivers/gpu/drm/xe/xe_hw_engine_group.c
> create mode 100644 drivers/gpu/drm/xe/xe_hw_engine_group.h
> create mode 100644 drivers/gpu/drm/xe/xe_hw_engine_group_types.h
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-xe
mailing list