[PATCH v2 1/5] drm/xe: move memirq out of vf
Michal Wajdeczko
michal.wajdeczko at intel.com
Wed Aug 28 20:01:05 UTC 2024
please s/vf/VF in the title
On 28.08.2024 11:18, Ilia Levi wrote:
> Up until now only VF used Memory Based Interrupts (memirq).
> Moving it out of VF to cater for other usages.
>
> Signed-off-by: Ilia Levi <ilia.levi at intel.com>
> Reviewed-by: Jonathan Cavitt <jonathan.cavitt at intel.com>
> ---
> drivers/gpu/drm/xe/xe_device.c | 2 +-
> drivers/gpu/drm/xe/xe_device_types.h | 6 ++--
> drivers/gpu/drm/xe/xe_guc.c | 2 +-
> drivers/gpu/drm/xe/xe_irq.c | 6 ++--
> drivers/gpu/drm/xe/xe_lrc.c | 2 +-
> drivers/gpu/drm/xe/xe_memirq.c | 46 ++++++++++------------------
> 6 files changed, 26 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
> index b6db7e082d88..623e4a977ba3 100644
> --- a/drivers/gpu/drm/xe/xe_device.c
> +++ b/drivers/gpu/drm/xe/xe_device.c
> @@ -661,7 +661,7 @@ int xe_device_probe(struct xe_device *xe)
> if (err)
> return err;
> if (IS_SRIOV_VF(xe)) {
since this is now out of tile.sriov.vf then checking for VF mode is not
clear here and should be moved to xe_memirq_init()
> - err = xe_memirq_init(&tile->sriov.vf.memirq);
> + err = xe_memirq_init(&tile->memirq);
> if (err)
> return err;
> }
> diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
> index 4ecd620921a3..200c22f41de3 100644
> --- a/drivers/gpu/drm/xe/xe_device_types.h
> +++ b/drivers/gpu/drm/xe/xe_device_types.h
> @@ -200,14 +200,14 @@ struct xe_tile {
> struct xe_lmtt lmtt;
> } pf;
> struct {
> - /** @sriov.vf.memirq: Memory Based Interrupts. */
> - struct xe_memirq memirq;
> -
> /** @sriov.vf.ggtt_balloon: GGTT regions excluded from use. */
> struct xe_ggtt_node *ggtt_balloon[2];
> } vf;
> } sriov;
>
> + /** @memirq: Memory Based Interrupts. */
> + struct xe_memirq memirq;
> +
> /** @migrate: Migration helper for vram blits and clearing */
> struct xe_migrate *migrate;
>
> diff --git a/drivers/gpu/drm/xe/xe_guc.c b/drivers/gpu/drm/xe/xe_guc.c
> index 52df28032a6f..5fd14e387d79 100644
> --- a/drivers/gpu/drm/xe/xe_guc.c
> +++ b/drivers/gpu/drm/xe/xe_guc.c
> @@ -863,7 +863,7 @@ int xe_guc_enable_communication(struct xe_guc *guc)
> struct xe_gt *gt = guc_to_gt(guc);
> struct xe_tile *tile = gt_to_tile(gt);
>
> - err = xe_memirq_init_guc(&tile->sriov.vf.memirq, guc);
> + err = xe_memirq_init_guc(&tile->memirq, guc);
> if (err)
> return err;
> } else {
> diff --git a/drivers/gpu/drm/xe/xe_irq.c b/drivers/gpu/drm/xe/xe_irq.c
> index 5f2c368c35ad..18a5272d9bb0 100644
> --- a/drivers/gpu/drm/xe/xe_irq.c
> +++ b/drivers/gpu/drm/xe/xe_irq.c
> @@ -566,7 +566,7 @@ static void vf_irq_reset(struct xe_device *xe)
>
> for_each_tile(tile, xe, id) {
> if (xe_device_has_memirq(xe))
> - xe_memirq_reset(&tile->sriov.vf.memirq);
> + xe_memirq_reset(&tile->memirq);
> else
> gt_irq_reset(tile);
> }
> @@ -609,7 +609,7 @@ static void vf_irq_postinstall(struct xe_device *xe)
>
> for_each_tile(tile, xe, id)
> if (xe_device_has_memirq(xe))
> - xe_memirq_postinstall(&tile->sriov.vf.memirq);
> + xe_memirq_postinstall(&tile->memirq);
>
> if (GRAPHICS_VERx100(xe) < 1210)
> xelp_intr_enable(xe, true);
> @@ -652,7 +652,7 @@ static irqreturn_t vf_mem_irq_handler(int irq, void *arg)
> spin_unlock(&xe->irq.lock);
>
> for_each_tile(tile, xe, id)
> - xe_memirq_handler(&tile->sriov.vf.memirq);
> + xe_memirq_handler(&tile->memirq);
>
> return IRQ_HANDLED;
> }
> diff --git a/drivers/gpu/drm/xe/xe_lrc.c b/drivers/gpu/drm/xe/xe_lrc.c
> index aec7db39c061..e01d88899890 100644
> --- a/drivers/gpu/drm/xe/xe_lrc.c
> +++ b/drivers/gpu/drm/xe/xe_lrc.c
> @@ -599,7 +599,7 @@ static void set_context_control(u32 *regs, struct xe_hw_engine *hwe)
>
> static void set_memory_based_intr(u32 *regs, struct xe_hw_engine *hwe)
> {
> - struct xe_memirq *memirq = >_to_tile(hwe->gt)->sriov.vf.memirq;
> + struct xe_memirq *memirq = >_to_tile(hwe->gt)->memirq;
> struct xe_device *xe = gt_to_xe(hwe->gt);
>
> if (!IS_SRIOV_VF(xe) || !xe_device_has_memirq(xe))
> diff --git a/drivers/gpu/drm/xe/xe_memirq.c b/drivers/gpu/drm/xe/xe_memirq.c
> index 95b6e9d7b7db..0db0726b76f3 100644
> --- a/drivers/gpu/drm/xe/xe_memirq.c
> +++ b/drivers/gpu/drm/xe/xe_memirq.c
> @@ -19,15 +19,13 @@
> #include "xe_hw_engine.h"
> #include "xe_map.h"
> #include "xe_memirq.h"
> -#include "xe_sriov.h"
> -#include "xe_sriov_printk.h"
>
> #define memirq_assert(m, condition) xe_tile_assert(memirq_to_tile(m), condition)
> -#define memirq_debug(m, msg...) xe_sriov_dbg_verbose(memirq_to_xe(m), "MEMIRQ: " msg)
> +#define memirq_debug(m, msg...) drm_dbg(&memirq_to_xe(m)->drm, "MEMIRQ: " msg)
maybe it's time to also add memirq_err(m, ...) to simplify code below?
>
> static struct xe_tile *memirq_to_tile(struct xe_memirq *memirq)
> {
> - return container_of(memirq, struct xe_tile, sriov.vf.memirq);
> + return container_of(memirq, struct xe_tile, memirq);
> }
>
> static struct xe_device *memirq_to_xe(struct xe_memirq *memirq)
> @@ -157,8 +155,8 @@ static int memirq_alloc_pages(struct xe_memirq *memirq)
> return drmm_add_action_or_reset(&xe->drm, __release_xe_bo, memirq->bo);
>
> out:
> - xe_sriov_err(memirq_to_xe(memirq),
> - "Failed to allocate memirq page (%pe)\n", ERR_PTR(err));
> + drm_err(&memirq_to_xe(memirq)->drm,
> + "Failed to allocate memirq page (%pe)\n", ERR_PTR(err));
memirq_err ?
> return err;
> }
>
> @@ -178,9 +176,7 @@ static void memirq_set_enable(struct xe_memirq *memirq, bool enable)
> *
> * These allocations are managed and will be implicitly released on unload.
> *
> - * Note: This function shall be called only by the VF driver.
> - *
> - * If this function fails then VF driver won't be able to operate correctly.
> + * If this function fails then the driver won't be able to operate correctly.
> * If `Memory Based Interrupts`_ are not used this function will return 0.
> *
> * Return: 0 on success or a negative error code on failure.
> @@ -190,8 +186,6 @@ int xe_memirq_init(struct xe_memirq *memirq)
> struct xe_device *xe = memirq_to_xe(memirq);
> int err;
>
> - memirq_assert(memirq, IS_SRIOV_VF(xe));
> -
now IS_SRIOV_VF check should be in the 'if' below, and then we can
update this single place once MSIX are enabled
or maybe it's time to introduce xe_device_uses_memirq() where we will
put all conditions/requirements ?
> if (!xe_device_has_memirq(xe))
> return 0;
>
> @@ -209,14 +203,13 @@ int xe_memirq_init(struct xe_memirq *memirq)
> * xe_memirq_source_ptr - Get GGTT's offset of the `Interrupt Source Report Page`_.
> * @memirq: the &xe_memirq to query
> *
> - * Shall be called only on VF driver when `Memory Based Interrupts`_ are used
> + * Shall be called when `Memory Based Interrupts`_ are used
> * and xe_memirq_init() didn't fail.
> *
> * Return: GGTT's offset of the `Interrupt Source Report Page`_.
> */
> u32 xe_memirq_source_ptr(struct xe_memirq *memirq)
> {
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
uses_memirq() ? and same for all places below
> memirq_assert(memirq, memirq->bo);
>
> @@ -227,14 +220,13 @@ u32 xe_memirq_source_ptr(struct xe_memirq *memirq)
> * xe_memirq_status_ptr - Get GGTT's offset of the `Interrupt Status Report Page`_.
> * @memirq: the &xe_memirq to query
> *
> - * Shall be called only on VF driver when `Memory Based Interrupts`_ are used
> + * Shall be called when `Memory Based Interrupts`_ are used
> * and xe_memirq_init() didn't fail.
> *
> * Return: GGTT's offset of the `Interrupt Status Report Page`_.
> */
> u32 xe_memirq_status_ptr(struct xe_memirq *memirq)
> {
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
> memirq_assert(memirq, memirq->bo);
>
> @@ -245,14 +237,13 @@ u32 xe_memirq_status_ptr(struct xe_memirq *memirq)
> * xe_memirq_enable_ptr - Get GGTT's offset of the Interrupt Enable Mask.
> * @memirq: the &xe_memirq to query
> *
> - * Shall be called only on VF driver when `Memory Based Interrupts`_ are used
> + * Shall be called when `Memory Based Interrupts`_ are used
> * and xe_memirq_init() didn't fail.
> *
> * Return: GGTT's offset of the Interrupt Enable Mask.
> */
> u32 xe_memirq_enable_ptr(struct xe_memirq *memirq)
> {
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
> memirq_assert(memirq, memirq->bo);
>
> @@ -267,7 +258,7 @@ u32 xe_memirq_enable_ptr(struct xe_memirq *memirq)
> * Register `Interrupt Source Report Page`_ and `Interrupt Status Report Page`_
> * to be used by the GuC when `Memory Based Interrupts`_ are required.
> *
> - * Shall be called only on VF driver when `Memory Based Interrupts`_ are used
> + * Shall be called when `Memory Based Interrupts`_ are used
> * and xe_memirq_init() didn't fail.
> *
> * Return: 0 on success or a negative error code on failure.
> @@ -279,7 +270,6 @@ int xe_memirq_init_guc(struct xe_memirq *memirq, struct xe_guc *guc)
> u32 source, status;
> int err;
>
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
> memirq_assert(memirq, memirq->bo);
>
> @@ -299,9 +289,9 @@ int xe_memirq_init_guc(struct xe_memirq *memirq, struct xe_guc *guc)
> return 0;
>
> failed:
> - xe_sriov_err(memirq_to_xe(memirq),
> - "Failed to setup report pages in %s (%pe)\n",
> - guc_name(guc), ERR_PTR(err));
> + drm_err(&memirq_to_xe(memirq)->drm,
> + "Failed to setup report pages in %s (%pe)\n",
> + guc_name(guc), ERR_PTR(err));
memirq_err ?
> return err;
> }
>
> @@ -311,12 +301,11 @@ int xe_memirq_init_guc(struct xe_memirq *memirq, struct xe_guc *guc)
> *
> * This is part of the driver IRQ setup flow.
> *
> - * This function shall only be used by the VF driver on platforms that use
> + * This function shall only be used on platforms that use
> * `Memory Based Interrupts`_.
> */
> void xe_memirq_reset(struct xe_memirq *memirq)
> {
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
>
> if (memirq->bo)
> @@ -329,12 +318,11 @@ void xe_memirq_reset(struct xe_memirq *memirq)
> *
> * This is part of the driver IRQ setup flow.
> *
> - * This function shall only be used by the VF driver on platforms that use
> + * This function shall only be used on platforms that use
> * `Memory Based Interrupts`_.
> */
> void xe_memirq_postinstall(struct xe_memirq *memirq)
> {
> - memirq_assert(memirq, IS_SRIOV_VF(memirq_to_xe(memirq)));
> memirq_assert(memirq, xe_device_has_memirq(memirq_to_xe(memirq)));
>
> if (memirq->bo)
> @@ -349,9 +337,9 @@ static bool memirq_received(struct xe_memirq *memirq, struct iosys_map *vector,
> value = iosys_map_rd(vector, offset, u8);
> if (value) {
> if (value != 0xff)
> - xe_sriov_err_ratelimited(memirq_to_xe(memirq),
> - "Unexpected memirq value %#x from %s at %u\n",
> - value, name, offset);
> + drm_err_ratelimited(&memirq_to_xe(memirq)->drm,
> + "Unexpected memirq value %#x from %s at %u\n",
> + value, name, offset);
> iosys_map_wr(vector, offset, u8, 0x00);
> }
>
More information about the Intel-xe
mailing list