[PATCH] drm/xe/gsc: Handle GSCCS ER interrupt

[Teres Alexis, Alan Previn]

On Thu, 2024-01-25 at 13:55 -0800, Daniele Ceraolo Spurio wrote:
> Starting on Xe2, the GSCCS engine reset is a 2-step process. When the
> driver or the GuC hit the GDRST register, the CS is immediately reset
alan: minor nit %s/hit/hits

> and a success is reported, but the GSC shim keeps resetting in the
alan: minor nit %s/keeps resetting/continues the reset
> background. While the shim reset is ongoing, the CS is able to accept
> new context submission, but any commands that require the shim will
> be stalled until the reset is completed. This means that we can keep
> submitting to the GSCCS as long as we make sure that the preemption
> timeout is big enough to cover any delay introduced by the reset
> (which it already is).
alan: as per offline conversation, we believe that reserved engines
like GSC isnt effected by sysfs knobs to change engine preemption
tmeouts. However, in the event a system integrator decides to play
around with the default preemption timeout CONFIG, then perhaps we
should add some kind of build or runtime warning like this in
hw_engine_init? :

if (hwe->class == XE_ENGINE_CLASS_OTHER &&
    CONFIG_DRM_XE_PREEMPT_TIMEOUT> [that-shim-timeout])
	drm_warn(blah..)

alan:snip

> diff --git a/drivers/gpu/drm/xe/regs/xe_gt_regs.h
> b/drivers/gpu/drm/xe/regs/xe_gt_regs.h
> index cd27480f6486..4acc8f3d646c 100644
> --- a/drivers/gpu/drm/xe/regs/xe_gt_regs.h
>  b/drivers/gpu/drm/xe/xe_gsc.c
> index 0b90fd9ef63a..42dd61a197cb 100644
> --- a/drivers/gpu/drm/xe/xe_gsc.c
> +++ b/drivers/gpu/drm/xe/xe_gsc.c
> @@ -25,6 +25,7 @@
>  #include "xe_wa.h"
>  #include "instructions/xe_gsc_commands.h"
>  #include "regs/xe_gsc_regs.h"
> +#include "regs/xe_gt_regs.h"
>  
>  static struct xe_gt *
>  gsc_to_gt(struct xe_gsc *gsc)
> @@ -271,6 +272,44 @@ static int gsc_upload_and_init(struct xe_gsc
> *gsc)
>         return 0;
>  }
>  
> +static int gsc_er_complete(struct xe_gt *gt)
> +{
alan:snip
> +       if (er_status == GSCI_TIMER_STATUS_TIMER_EXPIRED) {
> +               /*
> +                * XXX: we should trigger an FLR here, but we don't
> have support
> +                * for that yet.
> +                */
> +               xe_gt_err(gt, "GSC ER timed out!\n");
alan: in a case like this, GSC is basically dead right? (i.e. until we
support driver-flr). Wonder if should mark fw status as
XE_UC_FIRMWARE_LOAD_FAIL with a comment "eventually we can replace this
with a trigger to perform driver flr when that becomes available"

> +               return -EIO;
> +       }
> +
alan: do you think we should add a drm_dbg here if er_status is some
other unexpected value like "GSCI_TIMER_STATUS_RESET_IN_PROGRESS"?
> +       return 0;
> +}
> +
>  static void gsc_work(struct work_struct *work)
> 
alan:snip

>  int xe_gsc_init(struct xe_gsc *gsc)
>  {
>         struct xe_gt *gt = gsc_to_gt(gsc);
> diff --git a/drivers/gpu/drm/xe/xe_gsc.h
> b/drivers/gpu/drm/xe/xe_gsc.h
> index c6fb32e3fd79..dd16e9b8b894 100644
> --- a/drivers/gpu/drm/xe/xe_gsc.h
> +++ b/drivers/gpu/drm/xe/xe_gsc.h
> @@ -9,12 +9,14 @@
>  #include "xe_gsc_types.h"
>  
>  struct xe_gt;
> +struct xe_hw_engine;
>  
>  int xe_gsc_init(struct xe_gsc *gsc);
>  int xe_gsc_init_post_hwconfig(struct xe_gsc *gsc);
>  void xe_gsc_wait_for_worker_completion(struct xe_gsc *gsc);
>  void xe_gsc_load_start(struct xe_gsc *gsc);
>  void xe_gsc_remove(struct xe_gsc *gsc);
> +void xe_gsc_hwe_irq_handler(struct xe_hw_engine *hwe, u16 intr_vec);
>  
>  void xe_gsc_wa_14015076503(struct xe_gt *gt, bool prep);
>  
alan:snip