[v7] drm/xe: Add vram frequency sysfs attributes
Gupta, Anshuman
anshuman.gupta at intel.com
Tue Jan 2 10:09:35 UTC 2024
> -----Original Message-----
> From: Sundaresan, Sujaritha <sujaritha.sundaresan at intel.com>
> Sent: Tuesday, January 2, 2024 10:58 AM
> To: intel-xe at lists.freedesktop.org
> Cc: Gupta, Anshuman <anshuman.gupta at intel.com>; Sundaresan, Sujaritha
> <sujaritha.sundaresan at intel.com>
> Subject: [v7] drm/xe: Add vram frequency sysfs attributes
>
> Add vram frequency sysfs attributes under the below hierarchy;
>
> /device/tile#/memory/freq0
> |-max_freq
> |-min_freq
>
> v2: Drop "vram" from attribute names (Rodrigo)
>
> v3: Add documentation for new sysfs (Riana)
> Drop prefix from XEHP_PCODE_FREQUENCY_CONFIG (Riana)
>
> v4: Create sysfs under tile#/freq0 after removal of
> physical_memsize attrbute
>
> v5: Revert back to creating sysfs under tile#/memory/freq0
> Remove definition of GT_FREQUENCY_MULTIPLIER (Rodrigo)
>
> v6: Rename attributes to max/min_freq (Anshuman)
> Fix review comments (Rodrigo)
>
> v7: Make docuemntation more verbose
> Move sysfs to separate file (Anshuman)
>
> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan at intel.com>
> ---
> drivers/gpu/drm/xe/Makefile | 1 +
> drivers/gpu/drm/xe/xe_pcode_api.h | 7 ++
> drivers/gpu/drm/xe/xe_tile_sysfs.c | 3 +
> drivers/gpu/drm/xe/xe_vram_freq.c | 127
> +++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_vram_freq.h
> | 16 ++++
> 5 files changed, 154 insertions(+)
> create mode 100644 drivers/gpu/drm/xe/xe_vram_freq.c create mode
> 100644 drivers/gpu/drm/xe/xe_vram_freq.h
>
> diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile index
> df8601d6a59f..17884e422cec 100644
> --- a/drivers/gpu/drm/xe/Makefile
> +++ b/drivers/gpu/drm/xe/Makefile
> @@ -139,6 +139,7 @@ xe-y += xe_bb.o \
> xe_uc_debugfs.o \
> xe_uc_fw.o \
> xe_vm.o \
> + xe_vram_freq.o \
> xe_wait_user_fence.o \
> xe_wa.o \
> xe_wopcm.o
> diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h
> b/drivers/gpu/drm/xe/xe_pcode_api.h
> index 5935cfe30204..f153ce96f69a 100644
> --- a/drivers/gpu/drm/xe/xe_pcode_api.h
> +++ b/drivers/gpu/drm/xe/xe_pcode_api.h
> @@ -42,6 +42,13 @@
> #define POWER_SETUP_I1_SHIFT 6 /* 10.6 fixed
> point format */
> #define POWER_SETUP_I1_DATA_MASK
> REG_GENMASK(15, 0)
>
> +#define PCODE_FREQUENCY_CONFIG 0x6e
> +/* Frequency Config Sub Commands (param1) */
> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0
> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1
> +/* Domain IDs (param2) */
> +#define PCODE_MBOX_DOMAIN_HBM 0x2
> +
> struct pcode_err_decode {
> int errno;
> const char *str;
> diff --git a/drivers/gpu/drm/xe/xe_tile_sysfs.c
> b/drivers/gpu/drm/xe/xe_tile_sysfs.c
> index 0f8d3e7fce46..ed60d12f5cf0 100644
> --- a/drivers/gpu/drm/xe/xe_tile_sysfs.c
> +++ b/drivers/gpu/drm/xe/xe_tile_sysfs.c
> @@ -9,6 +9,7 @@
>
> #include "xe_tile.h"
> #include "xe_tile_sysfs.h"
> +#include "xe_vram_freq.h"
>
> static void xe_tile_sysfs_kobj_release(struct kobject *kobj) { @@ -50,6 +51,8
> @@ void xe_tile_sysfs_init(struct xe_tile *tile)
>
> tile->sysfs = &kt->base;
>
> + xe_vram_freq_init(tile);
> +
> err = drmm_add_action_or_reset(&xe->drm, tile_sysfs_fini, tile);
> if (err)
> drm_warn(&xe->drm, "%s: drmm_add_action_or_reset failed,
> err: %d\n", diff --git a/drivers/gpu/drm/xe/xe_vram_freq.c
> b/drivers/gpu/drm/xe/xe_vram_freq.c
> new file mode 100644
> index 000000000000..166d41a6b222
> --- /dev/null
> +++ b/drivers/gpu/drm/xe/xe_vram_freq.c
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2023 Intel Corporation
> + */
> +#include <linux/sysfs.h>
> +#include <drm/drm_managed.h>
> +
> +#include "xe_gt_types.h"
> +#include "xe_pcode.h"
> +#include "xe_pcode_api.h"
> +#include "xe_tile.h"
> +#include "xe_tile_sysfs.h"
> +#include "xe_vram_freq.h"
> +
> +/**
> + * DOC: Xe VRAM freq
> + *
> + * Provides sysfs entries for vram frequency in tile
> + *
> + * device/tile#/memory/freq0/max_freq - This is maximum frequency. This
> value is read-only as it
> + * is the fixed fuse point P0. It is not the
> system
> + * configuration.
> + * device/tile#/memory/freq0/min_freq - This is minimum frequency. This
> value is read-only as it
> + * is the fixed fuse point PN. It is not the
> system
> + * configuration.
> + */
> +
> +static struct xe_tile *dev_to_tile(struct device *dev) {
> + return kobj_to_tile(dev->kobj.parent); }
> +
> +static ssize_t max_freq_show(struct device *dev, struct device_attribute
> *attr,
> + char *buf)
> +{
> + struct xe_tile *tile = dev_to_tile(dev);
> + struct xe_gt *gt = tile->primary_gt;
> + u32 val, mbox;
> + int err;
> +
> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND,
> PCODE_FREQUENCY_CONFIG)
> + | REG_FIELD_PREP(PCODE_MB_PARAM1,
> PCODE_MBOX_FC_SC_READ_FUSED_P0)
> + | REG_FIELD_PREP(PCODE_MB_PARAM2,
> PCODE_MBOX_DOMAIN_HBM);
> +
> + err = xe_pcode_read(gt, mbox, &val, NULL);
> + if (err)
> + return err;
> +
> + /* data_out - Fused P0 for domain ID in units of 50 MHz */
> + val *= 50;
> +
> + return sysfs_emit(buf, "%u\n", val);
> +}
> +static DEVICE_ATTR_RO(max_freq);
> +
> +static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct xe_tile *tile = dev_to_tile(dev);
> + struct xe_gt *gt = tile->primary_gt;
> + u32 val, mbox;
> + int err;
> +
> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND,
> PCODE_FREQUENCY_CONFIG)
> + | REG_FIELD_PREP(PCODE_MB_PARAM1,
> PCODE_MBOX_FC_SC_READ_FUSED_PN)
> + | REG_FIELD_PREP(PCODE_MB_PARAM2,
> PCODE_MBOX_DOMAIN_HBM);
> +
> + err = xe_pcode_read(gt, mbox, &val, NULL);
> + if (err)
> + return err;
> +
> + /* data_out - Fused Pn for domain ID in units of 50 MHz */
> + val *= 50;
> +
> + return sysfs_emit(buf, "%u\n", val);
> +}
> +static DEVICE_ATTR_RO(min_freq);
> +
> +static struct attribute *freq_attrs[] = {
> + &dev_attr_max_freq.attr,
> + &dev_attr_min_freq.attr,
> + NULL
> +};
> +
> +static const struct attribute_group freq_group_attrs = {
> + .name = "freq0",
> + .attrs = freq_attrs,
> +};
> +
> +static void vram_freq_fini(struct drm_device *drm, void *arg) {
> + struct kobject *kobj = arg;
> +
> + sysfs_remove_group(kobj, &freq_group_attrs);
> + kobject_put(kobj);
> +}
> +
> +void xe_vram_freq_init(struct xe_tile *tile) {
Please provide a kernel function doc for this exported function.
> + struct xe_device *xe = tile_to_xe(tile);
> + struct kobject *kobj;
> + int err;
> +
> + if (xe->info.platform == XE_PVC) {
Drop these platform checks(including below ones) , instead use a early return at starts of this function.
If (xe->info.platform != XE_PVC)
Return.
With all of above comment.
Reviewed-by: Anshuman Gupta <anshuman.gupta at intel.com>
> + kobj = kobject_create_and_add("memory", tile->sysfs);
> + if (!kobj)
> + drm_warn(&xe->drm, "failed to add memory
> directory, err: %d\n", -ENOMEM);
> + }
> +
> + if (kobj && xe->info.platform == XE_PVC) {
> + err = sysfs_create_group(kobj, &freq_group_attrs);
> + if (err) {
> + drm_warn(&xe->drm, "failed to register vram freq
> sysfs, err: %d\n", err);
> + return;
> + }
> + }
> +
> + if (xe->info.platform == XE_PVC) {
> + err = drmm_add_action_or_reset(&xe->drm, vram_freq_fini,
> kobj);
> + if (err)
> + drm_warn(&xe->drm, "%s:
> drmm_add_action_or_reset failed, err: %d\n",
> + __func__, err);
> + }
> +
> +}
> +
> +
> diff --git a/drivers/gpu/drm/xe/xe_vram_freq.h
> b/drivers/gpu/drm/xe/xe_vram_freq.h
> new file mode 100644
> index 000000000000..94b04178a798
> --- /dev/null
> +++ b/drivers/gpu/drm/xe/xe_vram_freq.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright © 2023 Intel Corporation
> + */
> +
> +#ifndef _XE_VRAM_FREQ_H_
> +#define _XE_VRAM_FREQ_H_
> +
> +#include <drm/drm_managed.h>
> +
> +#include "xe_device.h"
> +#include "xe_tile_sysfs.h"
> +
> +void xe_vram_freq_init(struct xe_tile *tile);
> +
> +#endif /* _XE_VRAM_FREQ_H_ */
> --
> 2.25.1
More information about the Intel-xe
mailing list