[PATCH 3/4] drm/xe/xe2: Limit ccs framebuffers to tile4 only

Juha-Pekka Heikkila juhapekka.heikkila at gmail.com
Fri Jan 19 12:08:33 UTC 2024


On 19.1.2024 13.48, Jani Nikula wrote:
> On Thu, 18 Jan 2024, Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com> wrote:
>> Display engine support ccs only with tile4, prevent other modifiers
>> from using compressed memory.
>>
>> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
>> ---
>>   drivers/gpu/drm/xe/display/xe_fb_pin.c | 17 +++++++++++++++++
>>   1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/xe/display/xe_fb_pin.c b/drivers/gpu/drm/xe/display/xe_fb_pin.c
>> index 722c84a56607..579badb8c69e 100644
>> --- a/drivers/gpu/drm/xe/display/xe_fb_pin.c
>> +++ b/drivers/gpu/drm/xe/display/xe_fb_pin.c
>> @@ -13,6 +13,16 @@
>>   
>>   #include <drm/ttm/ttm_bo.h>
>>   
>> +static bool is_compressed(const struct drm_framebuffer *fb)
>> +{
>> +	struct xe_bo *bo = intel_fb_obj(fb);
>> +	struct xe_device *xe = to_xe_device(to_intel_framebuffer(fb)->base.dev);
>> +	struct xe_ggtt *ggtt = xe_device_get_root_tile(xe)->mem.ggtt;
>> +	u16 pat_index_compressed = tile_to_xe(ggtt->tile)->pat.idx[XE_CACHE_WT];
>> +
>> +	return (bo->pat_index == pat_index_compressed);
>> +}
>> +
>>   static void
>>   write_dpt_rotated(struct xe_bo *bo, struct iosys_map *map, u32 *dpt_ofs, u32 bo_ofs,
>>   		  u32 width, u32 height, u32 src_stride, u32 dst_stride)
>> @@ -349,12 +359,19 @@ void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags)
>>   int intel_plane_pin_fb(struct intel_plane_state *plane_state)
>>   {
>>   	struct drm_framebuffer *fb = plane_state->hw.fb;
>> +	struct xe_device *xe = to_xe_device(to_intel_framebuffer(fb)->base.dev);
>>   	struct xe_bo *bo = intel_fb_obj(fb);
>>   	struct i915_vma *vma;
>>   
>>   	/* We reject creating !SCANOUT fb's, so this is weird.. */
>>   	drm_WARN_ON(bo->ttm.base.dev, !(bo->flags & XE_BO_SCANOUT_BIT));
>>   
>> +	if (GRAPHICS_VER(xe) >= 20 && fb->modifier != I915_FORMAT_MOD_4_TILED &&
> 
> Is GRAPHICS_VER correct or should that be a DISPLAY_VER instead?

I think GRAPHICS_VER is correct here because this depend if base ccs 
functionality is there which doesn't relate to display version.

> 
>> +	    is_compressed(fb)) {
>> +		drm_warn(&xe->drm, "Cannot create ccs framebuffer with other than tile4 mofifier\n");
>> +		return -EINVAL;
>> +	}
>> +
>>   	vma = __xe_pin_fb_vma(to_intel_framebuffer(fb), &plane_state->view.gtt);
>>   	if (IS_ERR(vma))
>>   		return PTR_ERR(vma);
> 



More information about the Intel-xe mailing list