[Intel-xe] [PATCH 2/3] linux/bits.h: Add fixed-width GENMASK and BIT macros

Lucas De Marchi lucas.demarchi at intel.com
Fri Jan 19 15:07:01 UTC 2024


On Thu, Jan 18, 2024 at 06:01:58PM -0800, Yury Norov wrote:
>On Thu, Jan 18, 2024 at 05:25:00PM -0600, Lucas De Marchi wrote:
>> SA2PR11MB4874
>> X-OriginatorOrg: intel.com
>> Status: RO
>> Content-Length: 6257
>> Lines: 150
>>
>> On Thu, Jan 18, 2024 at 01:48:43PM -0800, Yury Norov wrote:
>> > On Thu, Jan 18, 2024 at 02:42:12PM -0600, Lucas De Marchi wrote:
>> > > Hi,
>> > >
>> > > Reviving this thread as now with xe driver merged we have 2 users for
>> > > a fixed-width BIT/GENMASK.
>> >
>> > Can you point where and why?
>>
>> See users of REG_GENMASK and REG_BIT in drivers/gpu/drm/i915 and
>> drivers/gpu/drm/xe. I  think the register definition in the xe shows it
>> in a good way:
>>
>> 	drivers/gpu/drm/xe/regs/xe_gt_regs.h
>>
>> The GPU registers are mostly 32-bit wide. We don't want to accidently do
>> something like below (s/30/33/ added for illustration purposes):
>>
>> #define LSC_CHICKEN_BIT_0                       XE_REG_MCR(0xe7c8)
>> #define   DISABLE_D8_D16_COASLESCE              REG_BIT(33)
>>
>> Same thing for GENMASK family of macros and for registers that are 16 or
>> 8 bits. See e.g. drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
>>
>>
>> >
>> > > On Wed, Jun 21, 2023 at 07:20:59PM -0700, Yury Norov wrote:
>> > > > Hi Lucas, all!
>> > > >
>> > > > (Thanks, Andy, for pointing to this thread.)
>> > > >
>> > > > On Mon, May 08, 2023 at 10:14:02PM -0700, Lucas De Marchi wrote:
>> > > > > Add GENMASK_U32(), GENMASK_U16() and GENMASK_U8()  macros to create
>> > > > > masks for fixed-width types and also the corresponding BIT_U32(),
>> > > > > BIT_U16() and BIT_U8().
>> > > >
>> > > > Can you split BIT() and GENMASK() material to separate patches?
>> > > >
>> > > > > All of those depend on a new "U" suffix added to the integer constant.
>> > > > > Due to naming clashes it's better to call the macro U32. Since C doesn't
>> > > > > have a proper suffix for short and char types, the U16 and U18 variants
>> > > > > just use U32 with one additional check in the BIT_* macros to make
>> > > > > sure the compiler gives an error when the those types overflow.
>> > > >
>> > > > I feel like I don't understand the sentence...
>> > > >
>> > > > > The BIT_U16() and BIT_U8() need the help of GENMASK_INPUT_CHECK(),
>> > > > > as otherwise they would allow an invalid bit to be passed. Hence
>> > > > > implement them in include/linux/bits.h rather than together with
>> > > > > the other BIT* variants.
>> > > >
>> > > > I don't think it's a good way to go because BIT() belongs to a more basic
>> > > > level than GENMASK(). Not mentioning possible header dependency issues.
>> > > > If you need to test against tighter numeric region, I'd suggest to
>> > > > do the same trick as  GENMASK_INPUT_CHECK() does, but in uapi/linux/const.h
>> > > > directly. Something like:
>> > > >        #define _U8(x)		(CONST_GT(U8_MAX, x) + _AC(x, U))
>> > >
>> > > but then make uapi/linux/const.h include linux/build_bug.h?
>> > > I was thinking about leaving BIT() define where it is, and add the
>> > > fixed-width versions in this header. I was thinking uapi/linux/const.h
>> > > was more about allowing the U/ULL suffixes for things shared with asm.
>> >
>> > You can't include kernel headers in uapi code. But you can try doing
>> > vice-versa: implement or move the pieces you need to share to the
>> > uapi/linux/const.h, and use them in the kernel code.
>>
>> but in this CONST_GE() should trigger a BUG/static_assert
>> on U8_MAX < x. AFAICS that check can't be on the uapi/ side,
>> so there's nothing much left to change in uapi/linux/const.h.
>>
>> I'd expect drivers to be the primary user of these fixed-width BIT
>> variants, hence the proposal to do  in include/linux/bits.h.
>> Ssomething like this WIP/untested diff (on top of your previous patch):
>>
>>
>> diff --git a/include/linux/bits.h b/include/linux/bits.h
>> index cb94128171b2..409cd10f7597 100644
>> --- a/include/linux/bits.h
>> +++ b/include/linux/bits.h
>> @@ -24,12 +24,16 @@
>>  #define GENMASK_INPUT_CHECK(h, l) \
>>  	(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
>>  		__is_constexpr((l) > (h)), (l) > (h), 0)))
>> +#define BIT_INPUT_CHECK(type, b) \
>> +	((BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
>> +		__is_constexpr(b), (b) >= BITS_PER_TYPE(type), 0))))
>>  #else
>>  /*
>>   * BUILD_BUG_ON_ZERO is not available in h files included from asm files,
>>   * disable the input check if that is the case.
>>   */
>>  #define GENMASK_INPUT_CHECK(h, l) 0
>> +#define BIT_INPUT_CHECK(type, b) 0
>>  #endif
>>  #define __GENMASK(t, h, l) \
>> @@ -44,4 +48,9 @@
>>  #define GENMASK_U32(h, l)	__GENMASK(u32, h, l)
>>  #define GENMASK_U64(h, l)	__GENMASK(u64, h, l)
>> +#define BIT_U8(b)		(u8)(BIT_INPUT_CHECK(u8, b) + BIT(b))
>> +#define BIT_U16(b)		(u16)(BIT_INPUT_CHECK(u16, b) + BIT(b))
>> +#define BIT_U32(b)		(u32)(BIT_INPUT_CHECK(u32, b) + BIT(b))
>> +#define BIT_U64(b)		(u64)(BIT_INPUT_CHECK(u64, b) + BIT(b))
>
>Can you add some vertical spacing here, like between GENMASK and BIT
>blocks?

I think gmail mangled this, because it does show up with more vertical
space on the email I sent:
https://lore.kernel.org/all/clamvpymzwiehjqd6jhuigymyg5ikxewxyeee2eae4tgzmaz7u@6rposizee3t6/

Anyway, I will clean this up and probably add some docs about its usage.

>
>> +
>>  #endif	/* __LINUX_BITS_H */
>>
>> >
>> > In the worst case, you can just implement the macro you need in the
>> > uapi header, and make it working that way.
>> >
>> > Can you confirm that my proposal increases the kernel size? If so, is
>> > there any way to fix it? If it doesn't, I'd prefer to use the
>> > __GENMASK() approach.
>>
>> I agree on continuing with your approach. The bloat-o-meter indeed
>> showed almost no difference. `size ....i915.o`  on the other hand
>> increased, but then decreased when I replaced our current REG_GENMASK()
>> implementation to reuse the new GENMASK_U*()
>>
>> 	$ # test-genmask.00: before any change
>> 	$ # test-genmask.01: after your patch to GENMASK
>> 	$ # test-genmask.01: after converting drivers/gpu/drm/i915/i915_reg_defs.h
>> 	    to use the new macros
>> 	$ size build64/drivers/gpu/drm/i915/i915.o-test-genmask.*
>> 	   text    data     bss     dec     hex filename
>> 	4506628  215083    7168 4728879  48282f build64/drivers/gpu/drm/i915/i915.o-test-genmask.00
>> 	4511084  215083    7168 4733335  483997 build64/drivers/gpu/drm/i915/i915.o-test-genmask.01
>> 	4493292  215083    7168 4715543  47f417 build64/drivers/gpu/drm/i915/i915.o-test-genmask.02
>>
>> 	$ ./scripts/bloat-o-meter  build64/drivers/gpu/drm/i915/i915.o-test-genmask.0[01]
>> 	add/remove: 0/0 grow/shrink: 2/1 up/down: 4/-5 (-1)
>> 	Function                                     old     new   delta
>> 	intel_drrs_activate                          399     402      +3
>> 	intel_psr_invalidate                         546     547      +1
>> 	intel_psr_flush                              880     875      -5
>> 	Total: Before=2980530, After=2980529, chg -0.00%
>>
>> 	$ ./scripts/bloat-o-meter  build64/drivers/gpu/drm/i915/i915.o-test-genmask.0[12]
>> 	add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
>> 	Function                                     old     new   delta
>> 	Total
>
>OK then. With the above approach, fixed-type BIT() macros look like wrappers
>around the plain BIT(), and I think, we can live with that.
>
>Can you  send all the material as a proper series, including my
>GENMASK patch, your patch above and a patch that switches your driver
>to using the new API? I'll take it then in bitmap-for-next when the
>merge window will get closed.

sure, thanks


Lucas De Marchi

>
>Thanks,
>Yury


More information about the Intel-xe mailing list