[PATCH 02/12] drm/xe: Introduce GGTT documentation
Rodrigo Vivi
rodrigo.vivi at intel.com
Thu Jul 11 17:11:45 UTC 2024
Document xe_ggtt and ensure it is part of the built kernel docs.
v2: - Accepted all Michal's suggestions
- Rebased on top of new set_pte per platform/wa function pointer
Cc: Matthew Brost <matthew.brost at intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko at intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray at intel.com> #v1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
Documentation/gpu/xe/xe_mm.rst | 15 ++++
drivers/gpu/drm/xe/xe_ggtt.c | 136 +++++++++++++++++++++++------
drivers/gpu/drm/xe/xe_ggtt_types.h | 32 +++++--
3 files changed, 148 insertions(+), 35 deletions(-)
diff --git a/Documentation/gpu/xe/xe_mm.rst b/Documentation/gpu/xe/xe_mm.rst
index 6c8fd8b4a466..95864a4502dd 100644
--- a/Documentation/gpu/xe/xe_mm.rst
+++ b/Documentation/gpu/xe/xe_mm.rst
@@ -7,6 +7,21 @@ Memory Management
.. kernel-doc:: drivers/gpu/drm/xe/xe_bo_doc.h
:doc: Buffer Objects (BO)
+GGTT
+====
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_ggtt.c
+ :doc: Global Graphics Translation Table (GGTT)
+
+GGTT Internal API
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_ggtt_types.h
+ :internal:
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_ggtt.c
+ :internal:
+
Pagetable building
==================
diff --git a/drivers/gpu/drm/xe/xe_ggtt.c b/drivers/gpu/drm/xe/xe_ggtt.c
index add14f3dea1f..709ef48f2fdb 100644
--- a/drivers/gpu/drm/xe/xe_ggtt.c
+++ b/drivers/gpu/drm/xe/xe_ggtt.c
@@ -30,6 +30,39 @@
#include "xe_wa.h"
#include "xe_wopcm.h"
+/**
+ * DOC: Global Graphics Translation Table (GGTT)
+ *
+ * Xe GGTT implements the support for a Global Virtual Address space that is used
+ * for resources that are accessible to privileged (i.e. kernel-mode) processes,
+ * and not tied to a specific user-level process. For example, the Graphics
+ * micro-Controller (GuC) and Display Engine (if present) utilize this Global
+ * address space.
+ *
+ * The Global GTT (GGTT) translates from the Global virtual address to a physical
+ * address that can be accessed by HW. The GGTT is a flat, single-level table.
+ *
+ * Xe implements a simplified version of the GGTT specifically managing only a
+ * certain range of it that goes from the WOPCM (Write-Once Power Control Module)
+ * to a predefined GUC_GGTT_TOP. This approach avoids complications related to
+ * the GuC (Graphics Microcontroller) hardware limitations. The GuC address space
+ * is limited on both ends of the GGTT, because the GuC shim HW redirects
+ * accesses to those addresses to other HW areas instead of going through the
+ * GGTT. On the bottom end, the GuC can't access offsets below the WOPCM size,
+ * while on the top side the limit is fixed at GUC_GGTT_TOP. To keep things
+ * simple, instead of checking each object to see if they are accessed by GuC or
+ * not, we just exclude those areas from the allocator. Additionally, to simplify
+ * the driver load, we use the maximum WOPCM size in this logic instead of the
+ * programmed one, so we don't need to wait until the actual size to be
+ * programmed is determined (which requires FW fetch) before initializing the
+ * GGTT. These simplifications might waste space in the GGTT (about 20-25 MBs
+ * depending on the platform) but we can live with this. Another benifit of this
+ * is the GuC bootrom can't access anything below the WOPCM max size so anything
+ * the bootom needs to access (e.g. a RSA key) needs to be placed in the GGTT
+ * above the WOPCM max size. Starting the GGTT allocations above the WOPCM max
+ * give us the correct placement for free.
+ */
+
static u64 xelp_ggtt_pte_encode_bo(struct xe_bo *bo, u64 bo_offset,
u16 pat_index)
{
@@ -164,12 +197,16 @@ static const struct xe_ggtt_pt_ops xelpg_pt_wa_ops = {
.ggtt_set_pte = xe_ggtt_set_pte_and_flush,
};
-/*
- * Early GGTT initialization, which allows to create new mappings usable by the
- * GuC.
- * Mappings are not usable by the HW engines, as it doesn't have scratch /
+/**
+ * xe_ggtt_init_early - Early GGTT initialization
+ * @ggtt: the &xe_ggtt to be initialized
+ *
+ * It allows to create new mappings usable by the GuC.
+ * Mappings are not usable by the HW engines, as it doesn't have scratch nor
* initial clear done to it yet. That will happen in the regular, non-early
- * GGTT init.
+ * GGTT initialization.
+ *
+ * Return: 0 on success or a negative error code on failure.
*/
int xe_ggtt_init_early(struct xe_ggtt *ggtt)
{
@@ -194,29 +231,6 @@ int xe_ggtt_init_early(struct xe_ggtt *ggtt)
if (IS_DGFX(xe) && xe->info.vram_flags & XE_VRAM_FLAGS_NEED64K)
ggtt->flags |= XE_GGTT_FLAGS_64K;
- /*
- * 8B per entry, each points to a 4KB page.
- *
- * The GuC address space is limited on both ends of the GGTT, because
- * the GuC shim HW redirects accesses to those addresses to other HW
- * areas instead of going through the GGTT. On the bottom end, the GuC
- * can't access offsets below the WOPCM size, while on the top side the
- * limit is fixed at GUC_GGTT_TOP. To keep things simple, instead of
- * checking each object to see if they are accessed by GuC or not, we
- * just exclude those areas from the allocator. Additionally, to
- * simplify the driver load, we use the maximum WOPCM size in this logic
- * instead of the programmed one, so we don't need to wait until the
- * actual size to be programmed is determined (which requires FW fetch)
- * before initializing the GGTT. These simplifications might waste space
- * in the GGTT (about 20-25 MBs depending on the platform) but we can
- * live with this.
- *
- * Another benifit of this is the GuC bootrom can't access anything
- * below the WOPCM max size so anything the bootom needs to access (e.g.
- * a RSA key) needs to be placed in the GGTT above the WOPCM max size.
- * Starting the GGTT allocations above the WOPCM max give us the correct
- * placement for free.
- */
if (ggtt->size > GUC_GGTT_TOP)
ggtt->size = GUC_GGTT_TOP;
@@ -262,6 +276,12 @@ static void xe_ggtt_initial_clear(struct xe_ggtt *ggtt)
mutex_unlock(&ggtt->lock);
}
+/**
+ * xe_ggtt_init - Regular non-early GGTT initialization
+ * @ggtt: the &xe_ggtt to be initialized
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_init(struct xe_ggtt *ggtt)
{
struct xe_device *xe = tile_to_xe(ggtt->tile);
@@ -382,6 +402,18 @@ void xe_ggtt_deballoon(struct xe_ggtt *ggtt, struct drm_mm_node *node)
mutex_unlock(&ggtt->lock);
}
+/**
+ * xe_ggtt_insert_special_node_locked - Locked version to insert a &drm_mm_node into the GGTT
+ * @ggtt: the &xe_ggtt where node will be inserted
+ * @node: the &drm_mm_node to be inserted
+ * @size: size of the node
+ * @align: alignment constrain of the node
+ * @mm_flags: flags to control the node behavior
+ *
+ * To be used in cases where ggtt->lock is already taken.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_insert_special_node_locked(struct xe_ggtt *ggtt, struct drm_mm_node *node,
u32 size, u32 align, u32 mm_flags)
{
@@ -389,6 +421,15 @@ int xe_ggtt_insert_special_node_locked(struct xe_ggtt *ggtt, struct drm_mm_node
mm_flags);
}
+/**
+ * xe_ggtt_insert_special_node - Insert a &drm_mm_node into the GGTT
+ * @ggtt: the &xe_ggtt where node will be inserted
+ * @node: the &drm_mm_node to be inserted
+ * @size: size of the node
+ * @align: alignment constrain of the node
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_insert_special_node(struct xe_ggtt *ggtt, struct drm_mm_node *node,
u32 size, u32 align)
{
@@ -402,6 +443,11 @@ int xe_ggtt_insert_special_node(struct xe_ggtt *ggtt, struct drm_mm_node *node,
return ret;
}
+/**
+ * xe_ggtt_map_bo - Map the BO into GGTT
+ * @ggtt: the &xe_ggtt where node will be mapped
+ * @bo: the &xe_bo to be mapped
+ */
void xe_ggtt_map_bo(struct xe_ggtt *ggtt, struct xe_bo *bo)
{
u16 cache_mode = bo->flags & XE_BO_FLAG_NEEDS_UC ? XE_CACHE_NONE : XE_CACHE_WB;
@@ -449,17 +495,39 @@ static int __xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
return err;
}
+/**
+ * xe_ggtt_insert_bo_at - Insert BO at a specific GGTT space
+ * @ggtt: the &xe_ggtt where bo will be inserted
+ * @bo: the &xe_bo to be inserted
+ * @start: address where it will be inserted
+ * @end: end of the range where it will be inserted
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_insert_bo_at(struct xe_ggtt *ggtt, struct xe_bo *bo,
u64 start, u64 end)
{
return __xe_ggtt_insert_bo_at(ggtt, bo, start, end);
}
+/**
+ * xe_ggtt_insert_bo - Insert BO into GGTT
+ * @ggtt: the &xe_ggtt where bo will be inserted
+ * @bo: the &xe_bo to be inserted
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_insert_bo(struct xe_ggtt *ggtt, struct xe_bo *bo)
{
return __xe_ggtt_insert_bo_at(ggtt, bo, 0, U64_MAX);
}
+/**
+ * xe_ggtt_remove_node - Remove a &drm_mm_node from the GGTT
+ * @ggtt: the &xe_ggtt where node will be removed
+ * @node: the &drm_mm_node to be removed
+ * @invalidate: if node needs invalidation upon removal
+ */
void xe_ggtt_remove_node(struct xe_ggtt *ggtt, struct drm_mm_node *node,
bool invalidate)
{
@@ -488,6 +556,11 @@ void xe_ggtt_remove_node(struct xe_ggtt *ggtt, struct drm_mm_node *node,
drm_dev_exit(idx);
}
+/**
+ * xe_ggtt_remove_bo - Remove a BO from the GGTT
+ * @ggtt: the &xe_ggtt where node will be removed
+ * @bo: the &xe_bo to be removed
+ */
void xe_ggtt_remove_bo(struct xe_ggtt *ggtt, struct xe_bo *bo)
{
if (XE_WARN_ON(!bo->ggtt_node.size))
@@ -544,6 +617,13 @@ void xe_ggtt_assign(struct xe_ggtt *ggtt, const struct drm_mm_node *node, u16 vf
}
#endif
+/**
+ * xe_ggtt_dump - Dump GGTT for debug
+ * @ggtt: the &xe_ggtt to be dumped
+ * @p: the &drm_mm_printer helper handle to be used to dump the information
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
int xe_ggtt_dump(struct xe_ggtt *ggtt, struct drm_printer *p)
{
int err;
diff --git a/drivers/gpu/drm/xe/xe_ggtt_types.h b/drivers/gpu/drm/xe/xe_ggtt_types.h
index 2245d88d8f39..4e2114201b35 100644
--- a/drivers/gpu/drm/xe/xe_ggtt_types.h
+++ b/drivers/gpu/drm/xe/xe_ggtt_types.h
@@ -13,30 +13,48 @@
struct xe_bo;
struct xe_gt;
+/**
+ * struct xe_ggtt - Main GGTT struct
+ * In general, each tile can contains its own GGTT instance.
+ */
struct xe_ggtt {
+ /** @tile: Back pointer to tile where this GGTT belongs */
struct xe_tile *tile;
-
+ /** @size: Total size of this GGTT */
u64 size;
#define XE_GGTT_FLAGS_64K BIT(0)
+ /**
+ * @flags: Flags for this GGTT
+ * Acceptable flags:
+ * - %XE_GGTT_FLAGS_64K - if PTE size is 64K. Otherwise, regular is 4K.
+ */
unsigned int flags;
-
+ /** @scratch: Internal object allocation used as a scratch page */
struct xe_bo *scratch;
-
+ /** @lock: Mutex lock to protect GGTT data */
struct mutex lock;
-
+ /**
+ * @gsm: The iomem pointer to the actual location of the translation
+ * table located in the GSM for easy PTE manipulation
+ */
u64 __iomem *gsm;
-
+ /** @pt_ops: Page Table operations per platform */
const struct xe_ggtt_pt_ops *pt_ops;
-
+ /** @mm: The memory manager used to manage individual GGTT allocations */
struct drm_mm mm;
-
/** @access_count: counts GGTT writes */
unsigned int access_count;
};
+/**
+ * struct xe_ggtt_pt_ops - GGTT Page table operations
+ * Which can vary from platform to platform.
+ */
struct xe_ggtt_pt_ops {
+ /** @pte_encode_bo: Encode PTE address for a given BO */
u64 (*pte_encode_bo)(struct xe_bo *bo, u64 bo_offset, u16 pat_index);
+ /** @ggtt_set_pte: Directly write into GGTT's PTE */
void (*ggtt_set_pte)(struct xe_ggtt *ggtt, u64 addr, u64 pte);
};
--
2.45.2
More information about the Intel-xe
mailing list