[PATCH v2 3/3] RFC drm/xe: add fault injection for lmem init check

[Riana Tauro]

Hi Rodrigo

On 3/19/2024 8:08 PM, Rodrigo Vivi wrote:
> On Tue, Mar 19, 2024 at 10:16:47AM +0530, Riana Tauro wrote:
>> Hi Rodrigo
>>
>> On 3/19/2024 2:45 AM, Rodrigo Vivi wrote:
>>> On Fri, Mar 15, 2024 at 03:35:30PM +0530, Riana Tauro wrote:
>>>> add a boot time fault injection for lmem init check.
>>>> This can be triggered by adding a modparam fail_lmem_init
>>>>
>>>> xe.fail_lmem_init=<interval>,<probability>,<space>,<times>
>>>
>>> Please let's avoid module parameters as much as we can.
>>>
>>> Let's use the CONFIG_FAULT_INJECTION_DEBUG_FS
>>> similarly to
>>>
>>> fault_create_debugfs_attr("fail_gt_reset", root, &gt_reset_f\
>>> ailure);
>>>
>> lmem init check is done during early probe. We cannot set debugfs before
>> probe completes. So i added the module parameter.
> 
> doh! indeed! sorry about that.
> 
>>
>> I can try to set static values before injecting fault if module param is not
>> needed.
>>
>> lmem_init_fail.times = 1;
>> lmem_init_fail.probability = 100;
> 
> no, let's go with the module parameter. It would be good if we could have
> something per-device, but there's no way to pass argument to the bind/probe
> operation...
> 
> hmm, unless if we also require the pci id as the input to the param.
> The bad part would be that we need to parse the str, then make another
> string for the setup_fault_attr().
> 
Since this will be used only in igt, would we need per-device?
> also I agree with Himal, an igt case is important here.

Sure will float an igt patch for this.

Thanks,
Riana
> 
> Thanks,
> Rodrigo.
> 
>>
>> Thanks
>> Riana
>>> And then use it like this:
>>>
>>> https://lore.kernel.org/all/20240315010843.194335-1-rodrigo.vivi@intel.com/
>>>
>>>>
>>>> Adding this causes the lmem init check to fail causing
>>>> the probe to defer.
>>>>
>>>> v2: add fault injection (Lucas)
>>>>
>>>> Signed-off-by: Riana Tauro <riana.tauro at intel.com>
>>>> ---
>>>>    drivers/gpu/drm/xe/xe_device.c | 21 +++++++++++++++++++++
>>>>    drivers/gpu/drm/xe/xe_module.c |  5 +++++
>>>>    drivers/gpu/drm/xe/xe_module.h |  3 +++
>>>>    3 files changed, 29 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
>>>> index 50473329cce7..393610e95bd1 100644
>>>> --- a/drivers/gpu/drm/xe/xe_device.c
>>>> +++ b/drivers/gpu/drm/xe/xe_device.c
>>>> @@ -51,6 +51,10 @@ struct lockdep_map xe_device_mem_access_lockdep_map = {
>>>>    };
>>>>    #endif
>>>> +#ifdef CONFIG_FAULT_INJECTION
>>>> +DECLARE_FAULT_ATTR(lmem_init_fail);
>>>> +#endif
>>>> +
>>>>    static int xe_file_open(struct drm_device *dev, struct drm_file *file)
>>>>    {
>>>>    	struct xe_device *xe = to_xe_device(dev);
>>>> @@ -431,6 +435,23 @@ static int wait_for_lmem_ready(struct xe_device *xe)
>>>>    	if (IS_SRIOV_VF(xe))
>>>>    		return 0;
>>>> +#ifdef CONFIG_FAULT_INJECTION
>>>> +	/*
>>>> +	 * use fault injection to cause a lmem init failure to validate
>>>> +	 * deferred probe. Set the verbose to 0 to  avoid dump stack
>>>> +	 */
>>>> +	if (xe_modparam.fail_lmem_init) {
>>>> +		setup_fault_attr(&lmem_init_fail, xe_modparam.fail_lmem_init);
>>>> +		lmem_init_fail.verbose = 0;
>>>> +		if (should_fail(&lmem_init_fail, 1)) {
>>>> +			/* add delay to reduce the number of deferred probe attempts */
>>>> +			msleep(500);
>>>> +			drm_dbg(&xe->drm, "Fault Injection lmem init failure\n");
>>>> +			return -EPROBE_DEFER;
>>>> +		}
>>>> +	}
>>>> +#endif
>>>> +
>>>>    	if (verify_lmem_ready(gt))
>>>>    		return 0;
>>>> diff --git a/drivers/gpu/drm/xe/xe_module.c b/drivers/gpu/drm/xe/xe_module.c
>>>> index 110b69864656..c4efbab430a7 100644
>>>> --- a/drivers/gpu/drm/xe/xe_module.c
>>>> +++ b/drivers/gpu/drm/xe/xe_module.c
>>>> @@ -48,6 +48,11 @@ module_param_named_unsafe(force_probe, xe_modparam.force_probe, charp, 0400);
>>>>    MODULE_PARM_DESC(force_probe,
>>>>    		 "Force probe options for specified devices. See CONFIG_DRM_XE_FORCE_PROBE for details.");
>>>> +#ifdef CONFIG_FAULT_INJECTION
>>>> +module_param_named_unsafe(fail_lmem_init, xe_modparam.fail_lmem_init, charp, 0400);
>>>> +MODULE_PARM_DESC(fail_lmem_init, "Fault injection. fail_lmem_init=<interval>,<probability>,<space>,<times>");
>>>> +#endif
>>>> +
>>>>    struct init_funcs {
>>>>    	int (*init)(void);
>>>>    	void (*exit)(void);
>>>> diff --git a/drivers/gpu/drm/xe/xe_module.h b/drivers/gpu/drm/xe/xe_module.h
>>>> index 88ef0e8b2bfd..ccbeacbc3efb 100644
>>>> --- a/drivers/gpu/drm/xe/xe_module.h
>>>> +++ b/drivers/gpu/drm/xe/xe_module.h
>>>> @@ -18,6 +18,9 @@ struct xe_modparam {
>>>>    	char *huc_firmware_path;
>>>>    	char *gsc_firmware_path;
>>>>    	char *force_probe;
>>>> +#if IS_ENABLED(CONFIG_FAULT_INJECTION)
>>>> +	char *fail_lmem_init;
>>>> +#endif /* CONFIG_FAULT_INJECTION */
>>>>    };
>>>>    extern struct xe_modparam xe_modparam;
>>>> -- 
>>>> 2.40.0
>>>>