[PATCH 2/7] drm/i915/display: Prepare for dsc 3 stream splitter

Kandpal, Suraj suraj.kandpal at intel.com
Mon Nov 4 10:33:26 UTC 2024



> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Wednesday, October 30, 2024 9:41 AM
> To: intel-gfx at lists.freedesktop.org
> Cc: intel-xe at lists.freedesktop.org; Kandpal, Suraj <suraj.kandpal at intel.com>
> Subject: [PATCH 2/7] drm/i915/display: Prepare for dsc 3 stream splitter
> 
> At the moment dsc_split represents whether the dsc splitter is used or not.
> With 3 DSC engines, the splitter can split into two streams or three streams.
> 
> Instead of representing the splitter's state, it is more effective to represent the
> number of DSC streams per pipe.
> 
> Replace the `dsc.dsc_split` member with `dsc.num_streams` to indicate the
> number of DSC streams used per pipe. This change will implicitly convey the
> splitter's operation mode.
> 
> v2: Avoid new enum for dsc split. (Suraj)
> v3:
> -Replace dsc_split with num_stream. (Suraj) -Avoid extra parentheses. (Jani)
> v4: Set num_streams to 1, if VDSC_JOINER not set while readout.
> 

LGTM,
Reviewed-by: Suraj Kandpal <suraj.kandpal at intel.com>

> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c             |  4 +++-
>  drivers/gpu/drm/i915/display/intel_display.c       |  2 +-
>  drivers/gpu/drm/i915/display/intel_display_types.h |  2 +-
>  drivers/gpu/drm/i915/display/intel_dp.c            |  4 +++-
>  drivers/gpu/drm/i915/display/intel_vdsc.c          | 12 +++++++-----
>  5 files changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 115d79c80b9a..b01dfbeb314b 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1596,7 +1596,9 @@ static int gen11_dsi_dsc_compute_config(struct
> intel_encoder *encoder,
> 
>  	/* FIXME: split only when necessary */
>  	if (crtc_state->dsc.slice_count > 1)
> -		crtc_state->dsc.dsc_split = true;
> +		crtc_state->dsc.num_streams = 2;
> +	else
> +		crtc_state->dsc.num_streams = 1;
> 
>  	/* FIXME: initialize from VBT */
>  	vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST; diff --git
> a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index ef1436146325..3dfff0a8c386 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -5741,7 +5741,7 @@ intel_pipe_config_compare(const struct
> intel_crtc_state *current_config,
>  	PIPE_CONF_CHECK_I(dsc.config.nsl_bpg_offset);
> 
>  	PIPE_CONF_CHECK_BOOL(dsc.compression_enable);
> -	PIPE_CONF_CHECK_BOOL(dsc.dsc_split);
> +	PIPE_CONF_CHECK_I(dsc.num_streams);
>  	PIPE_CONF_CHECK_I(dsc.compressed_bpp_x16);
> 
>  	PIPE_CONF_CHECK_BOOL(splitter.enable);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 2bb1fa64da2f..5611a4dd6a6f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1235,7 +1235,7 @@ struct intel_crtc_state {
>  	/* Display Stream compression state */
>  	struct {
>  		bool compression_enable;
> -		bool dsc_split;
> +		int num_streams;
>  		/* Compressed Bpp in U6.4 format (first 4 bits for fractional
> part) */
>  		u16 compressed_bpp_x16;
>  		u8 slice_count;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index bd9f37e1a13f..dbb1d75c0576 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2410,7 +2410,9 @@ int intel_dp_dsc_compute_config(struct intel_dp
> *intel_dp,
>  	 * then we need to use 2 VDSC instances.
>  	 */
>  	if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1)
> -		pipe_config->dsc.dsc_split = true;
> +		pipe_config->dsc.num_streams = 2;
> +	else
> +		pipe_config->dsc.num_streams = 1;
> 
>  	ret = intel_dp_dsc_compute_params(connector, pipe_config);
>  	if (ret < 0) {
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c
> b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index 40525f5c4c42..168f39499c66 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -379,7 +379,7 @@ intel_dsc_power_domain(struct intel_crtc *crtc, enum
> transcoder cpu_transcoder)
> 
>  static int intel_dsc_get_vdsc_per_pipe(const struct intel_crtc_state
> *crtc_state)  {
> -	return crtc_state->dsc.dsc_split ? 2 : 1;
> +	return crtc_state->dsc.num_streams;
>  }
> 
>  int intel_dsc_get_num_vdsc_instances(const struct intel_crtc_state
> *crtc_state) @@ -976,8 +976,10 @@ void intel_dsc_get_config(struct
> intel_crtc_state *crtc_state)
>  	if (!crtc_state->dsc.compression_enable)
>  		goto out;
> 
> -	crtc_state->dsc.dsc_split = (dss_ctl2 &
> RIGHT_BRANCH_VDSC_ENABLE) &&
> -		(dss_ctl1 & JOINER_ENABLE);
> +	if (dss_ctl1 & JOINER_ENABLE && dss_ctl2 &
> RIGHT_BRANCH_VDSC_ENABLE)
> +		crtc_state->dsc.num_streams = 2;
> +	else
> +		crtc_state->dsc.num_streams = 1;
> 
>  	intel_dsc_get_pps_config(crtc_state);
>  out:
> @@ -988,10 +990,10 @@ static void intel_vdsc_dump_state(struct
> drm_printer *p, int indent,
>  				  const struct intel_crtc_state *crtc_state)  {
>  	drm_printf_indent(p, indent,
> -			  "dsc-dss: compressed-bpp:" FXP_Q4_FMT ", slice-
> count: %d, split: %s\n",
> +			  "dsc-dss: compressed-bpp:" FXP_Q4_FMT ", slice-
> count: %d,
> +num_streams: %d\n",
>  			  FXP_Q4_ARGS(crtc_state-
> >dsc.compressed_bpp_x16),
>  			  crtc_state->dsc.slice_count,
> -			  str_yes_no(crtc_state->dsc.dsc_split));
> +			  crtc_state->dsc.num_streams);
>  }
> 
>  void intel_vdsc_state_dump(struct drm_printer *p, int indent,
> --
> 2.45.2



More information about the Intel-xe mailing list