[PATCH 2/8] drm/i9i5/display: use intel_display in intel_de_read calls of skl_watermark.c
Jani Nikula
jani.nikula at intel.com
Tue Nov 5 08:58:52 UTC 2024
On Tue, 05 Nov 2024, Vinod Govindapillai <vinod.govindapillai at intel.com> wrote:
> Convert all intel_de_read() to use intel_display instead of
> struct drm_i915_private object. This is in preparation for
> the rest of the patches in this series where hw support for
> the minimum and interim ddb allocations for async flip is
> added.
>
> Signed-off-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
> ---
> drivers/gpu/drm/i915/display/skl_watermark.c | 48 +++++++++++---------
> 1 file changed, 26 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
> index d9d7238f0fb4..2afc95e7533c 100644
> --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> @@ -82,12 +82,14 @@ intel_has_sagv(struct drm_i915_private *i915)
> }
>
> static u32
> -intel_sagv_block_time(struct drm_i915_private *i915)
> +intel_sagv_block_time(struct intel_display *display)
> {
> + struct drm_i915_private *i915 = to_i915(display->drm);
> +
> if (DISPLAY_VER(i915) >= 14) {
Please don't limit to changing just the intel_de_* per function. Convert
all you can.
> u32 val;
>
> - val = intel_de_read(i915, MTL_LATENCY_SAGV);
> + val = intel_de_read(display, MTL_LATENCY_SAGV);
>
> return REG_FIELD_GET(MTL_LATENCY_QCLK_SAGV, val);
> } else if (DISPLAY_VER(i915) >= 12) {
> @@ -126,7 +128,7 @@ static void intel_sagv_init(struct drm_i915_private *i915)
>
> drm_WARN_ON(&i915->drm, i915->display.sagv.status == I915_SAGV_UNKNOWN);
>
> - i915->display.sagv.block_time_us = intel_sagv_block_time(i915);
> + i915->display.sagv.block_time_us = intel_sagv_block_time(&i915->display);
Please add struct intel_display *display local variable.
You don't need to change everything here (in the caller side) in one go,
but quite obviously the function would benefit from further changes.
>
> drm_dbg_kms(&i915->drm, "SAGV supported: %s, original SAGV block time: %u us\n",
> str_yes_no(intel_has_sagv(i915)), i915->display.sagv.block_time_us);
> @@ -791,7 +793,7 @@ static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
> }
>
> static void
> -skl_ddb_get_hw_plane_state(struct drm_i915_private *i915,
> +skl_ddb_get_hw_plane_state(struct intel_display *display,
> const enum pipe pipe,
> const enum plane_id plane_id,
> struct skl_ddb_entry *ddb,
> @@ -801,18 +803,18 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *i915,
>
> /* Cursor doesn't support NV12/planar, so no extra calculation needed */
> if (plane_id == PLANE_CURSOR) {
> - val = intel_de_read(i915, CUR_BUF_CFG(pipe));
> + val = intel_de_read(display, CUR_BUF_CFG(pipe));
> skl_ddb_entry_init_from_hw(ddb, val);
> return;
> }
>
> - val = intel_de_read(i915, PLANE_BUF_CFG(pipe, plane_id));
> + val = intel_de_read(display, PLANE_BUF_CFG(pipe, plane_id));
> skl_ddb_entry_init_from_hw(ddb, val);
>
> - if (DISPLAY_VER(i915) >= 11)
> + if (DISPLAY_VER(display) >= 11)
> return;
>
> - val = intel_de_read(i915, PLANE_NV12_BUF_CFG(pipe, plane_id));
> + val = intel_de_read(display, PLANE_NV12_BUF_CFG(pipe, plane_id));
> skl_ddb_entry_init_from_hw(ddb_y, val);
> }
>
> @@ -832,7 +834,7 @@ static void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
> return;
>
> for_each_plane_id_on_crtc(crtc, plane_id)
> - skl_ddb_get_hw_plane_state(i915, pipe,
> + skl_ddb_get_hw_plane_state(&i915->display, pipe,
Please add the local variable.
> plane_id,
> &ddb[plane_id],
> &ddb_y[plane_id]);
> @@ -2932,6 +2934,7 @@ static void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
> struct skl_pipe_wm *out)
> {
> struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> + struct intel_display *display = &i915->display;
Please initialize struct intel_display *display using
to_intel_display(...) when possible instead of i915. Here, it would be:
struct intel_display *display = to_intel_display(crtc);
That doesn't need to be changed anymore, &i915->display does.
And please put the display variable first.
> enum pipe pipe = crtc->pipe;
> enum plane_id plane_id;
> int level;
> @@ -2942,32 +2945,32 @@ static void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
>
> for (level = 0; level < i915->display.wm.num_levels; level++) {
Please don't limit to changing just intel_de_*. This should be
display->wm.num_levels. Etc.
> if (plane_id != PLANE_CURSOR)
> - val = intel_de_read(i915, PLANE_WM(pipe, plane_id, level));
> + val = intel_de_read(display, PLANE_WM(pipe, plane_id, level));
> else
> - val = intel_de_read(i915, CUR_WM(pipe, level));
> + val = intel_de_read(display, CUR_WM(pipe, level));
>
> skl_wm_level_from_reg_val(val, &wm->wm[level]);
> }
>
> if (plane_id != PLANE_CURSOR)
> - val = intel_de_read(i915, PLANE_WM_TRANS(pipe, plane_id));
> + val = intel_de_read(display, PLANE_WM_TRANS(pipe, plane_id));
> else
> - val = intel_de_read(i915, CUR_WM_TRANS(pipe));
> + val = intel_de_read(display, CUR_WM_TRANS(pipe));
>
> skl_wm_level_from_reg_val(val, &wm->trans_wm);
>
> if (HAS_HW_SAGV_WM(i915)) {
> if (plane_id != PLANE_CURSOR)
> - val = intel_de_read(i915, PLANE_WM_SAGV(pipe, plane_id));
> + val = intel_de_read(display, PLANE_WM_SAGV(pipe, plane_id));
> else
> - val = intel_de_read(i915, CUR_WM_SAGV(pipe));
> + val = intel_de_read(display, CUR_WM_SAGV(pipe));
>
> skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
>
> if (plane_id != PLANE_CURSOR)
> - val = intel_de_read(i915, PLANE_WM_SAGV_TRANS(pipe, plane_id));
> + val = intel_de_read(display, PLANE_WM_SAGV_TRANS(pipe, plane_id));
> else
> - val = intel_de_read(i915, CUR_WM_SAGV_TRANS(pipe));
> + val = intel_de_read(display, CUR_WM_SAGV_TRANS(pipe));
>
> skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
> } else if (DISPLAY_VER(i915) >= 12) {
> @@ -2985,7 +2988,7 @@ static void skl_wm_get_hw_state(struct drm_i915_private *i915)
> struct intel_crtc *crtc;
>
> if (HAS_MBUS_JOINING(i915))
> - dbuf_state->joined_mbus = intel_de_read(i915, MBUS_CTL) & MBUS_JOIN;
> + dbuf_state->joined_mbus = intel_de_read(display, MBUS_CTL) & MBUS_JOIN;
>
> dbuf_state->mdclk_cdclk_ratio = intel_mdclk_cdclk_ratio(display, &display->cdclk.hw);
>
> @@ -3014,7 +3017,7 @@ static void skl_wm_get_hw_state(struct drm_i915_private *i915)
> if (!crtc_state->hw.active)
> continue;
>
> - skl_ddb_get_hw_plane_state(i915, crtc->pipe,
> + skl_ddb_get_hw_plane_state(display, crtc->pipe,
> plane_id, ddb, ddb_y);
>
> skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb);
> @@ -3330,18 +3333,19 @@ adjust_wm_latency(struct drm_i915_private *i915,
>
> static void mtl_read_wm_latency(struct drm_i915_private *i915, u16 wm[])
> {
> + struct intel_display *display = &i915->display;
> int num_levels = i915->display.wm.num_levels;
display->wm.num_levels
> u32 val;
>
> - val = intel_de_read(i915, MTL_LATENCY_LP0_LP1);
> + val = intel_de_read(display, MTL_LATENCY_LP0_LP1);
> wm[0] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
> wm[1] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
>
> - val = intel_de_read(i915, MTL_LATENCY_LP2_LP3);
> + val = intel_de_read(display, MTL_LATENCY_LP2_LP3);
> wm[2] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
> wm[3] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
>
> - val = intel_de_read(i915, MTL_LATENCY_LP4_LP5);
> + val = intel_de_read(display, MTL_LATENCY_LP4_LP5);
> wm[4] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
> wm[5] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
--
Jani Nikula, Intel
More information about the Intel-xe
mailing list