[PATCH 3/3] drm/xe/pmu: Add GT frequency events

Rodrigo Vivi rodrigo.vivi at intel.com
Fri Nov 8 22:35:54 UTC 2024


On Fri, Nov 08, 2024 at 10:15:12AM -0800, Vinay Belgaumkar wrote:
> Define PMU events for GT frequency (actual and requested). This is
> a port from the i915 driver implementation, where an internal timer
> is used to aggregate GT frequencies over certain fixed interval.
> Following PMU events are being added-
> 
>   xe_0000_00_02.0/actual-frequency-gt0/              [Kernel PMU event]
>   xe_0000_00_02.0/actual-frequency-gt1/              [Kernel PMU event]
>   xe_0000_00_02.0/requested-frequency-gt0/           [Kernel PMU event]
>   xe_0000_00_02.0/requested-frequency-gt1/           [Kernel PMU event]
> 
> Standard perf commands can be used to monitor GT frequency-
>   $ perf stat -e xe_0000_00_02.0/requested-frequency-gt0/ -I1000
> 
>      1.001175175                700 M    xe/requested-frequency-gt0/
>      2.005891881                703 M    xe/requested-frequency-gt0/
>      3.007318169                700 M    xe/requested-frequency-gt0/
> 
> Actual/requested frequencies will be 0 when GT is suspended.
> 
> v2: Checkpatch fix, moved timer code to this patch
> v3: Fix kunit issue
> 
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
> ---
>  drivers/gpu/drm/xe/xe_gt.c        |   2 +
>  drivers/gpu/drm/xe/xe_pmu.c       | 247 +++++++++++++++++++++++++++++-
>  drivers/gpu/drm/xe/xe_pmu.h       |   2 +
>  drivers/gpu/drm/xe/xe_pmu_types.h |  26 ++++
>  4 files changed, 276 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/xe/xe_gt.c b/drivers/gpu/drm/xe/xe_gt.c
> index fd18bbce99da..ef27db83c09c 100644
> --- a/drivers/gpu/drm/xe/xe_gt.c
> +++ b/drivers/gpu/drm/xe/xe_gt.c
> @@ -940,6 +940,8 @@ int xe_gt_resume(struct xe_gt *gt)
>  
>  	xe_gt_idle_enable_pg(gt);
>  
> +	xe_pmu_resume(gt);
> +
>  	xe_force_wake_put(gt_to_fw(gt), fw_ref);
>  	xe_gt_dbg(gt, "resumed\n");
>  
> diff --git a/drivers/gpu/drm/xe/xe_pmu.c b/drivers/gpu/drm/xe/xe_pmu.c
> index 80d78628006e..4fbd5a99dbcc 100644
> --- a/drivers/gpu/drm/xe/xe_pmu.c
> +++ b/drivers/gpu/drm/xe/xe_pmu.c
> @@ -63,6 +63,31 @@ static unsigned int xe_pmu_target_cpu = -1;
>   *      2352945
>   *
>   * Each value is roughly a 1000ms increment here as well. This is expected GT residency when idle.
> + *
> + * PMU frequency events use a software timer to aggregate GT freq values over the time of capture.
> + * This allows us to calculate a rough average over the timespan. This is why sysfs is the best way
> + * to obtain instantaneous frequency if accuracy is intended. Advantage of using PMU is that it
> + * results in lesser CPU utilization as compared to dumping sysfs entries repeatedly.
> + *
> + * To list GT frequency events, use the following-
> + *
> + * $ perf list | grep frequency-gt
> + *   xe_0000_00_02.0/actual-frequency-gt0/              [Kernel PMU event]
> + *   xe_0000_00_02.0/actual-frequency-gt1/              [Kernel PMU event]
> + *   xe_0000_00_02.0/requested-frequency-gt0/           [Kernel PMU event]
> + *   xe_0000_00_02.0/requested-frequency-gt1/           [Kernel PMU event]
> + *
> + * $ perf stat -e xe_0000_00_02.0/requested-frequency-gt0/ -I1000
> + * #           time             counts unit events
> + *      1.001189056               1950 M    xe_0000_00_02.0/requested-frequency-gt0/
> + *      2.006388494               1960 M    xe_0000_00_02.0/requested-frequency-gt0/
> + *      3.007930311               1959 M    xe_0000_00_02.0/requested-frequency-gt0/
> + *
> + * Dumping requested freq from sysfs-
> + * $  while true; do cat /sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq ; sleep 1; done
> + *    1950
> + *    1950
> + *    1950

Thank you so much for adding this!

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

>   */
>  
>  static struct xe_pmu *event_to_pmu(struct perf_event *event)
> @@ -88,6 +113,12 @@ static unsigned int other_bit(const u64 config)
>  	case XE_PMU_RC6_RESIDENCY:
>  		val = __XE_PMU_RC6_RESIDENCY_ENABLED;
>  		break;
> +	case XE_PMU_ACTUAL_FREQUENCY:
> +		val =  __XE_PMU_ACTUAL_FREQUENCY_ENABLED;
> +		break;
> +	case XE_PMU_REQUESTED_FREQUENCY:
> +		val = __XE_PMU_REQUESTED_FREQUENCY_ENABLED;
> +		break;
>  	default:
>  		/*
>  		 * Events that do not require sampling, or tracking state
> @@ -104,6 +135,22 @@ static unsigned int config_bit(const u64 config)
>  	return other_bit(config);
>  }
>  
> +static u32 config_mask(const u64 config)
> +{
> +	unsigned int bit = config_bit(config);
> +
> +	if (__builtin_constant_p(config))
> +		BUILD_BUG_ON(bit >
> +			     BITS_PER_TYPE(typeof_member(struct xe_pmu,
> +					   enable)) - 1);
> +	else
> +		WARN_ON_ONCE(bit >
> +			     BITS_PER_TYPE(typeof_member(struct xe_pmu,
> +							 enable)) - 1);
> +
> +	return BIT(config_bit(config));
> +}
> +
>  static unsigned int event_bit(struct perf_event *event)
>  {
>  	return config_bit(event->attr.config);
> @@ -132,6 +179,10 @@ config_status(struct xe_device *xe, u64 config)
>  		if (xe->info.skip_guc_pc)
>  			return -ENODEV;
>  		break;
> +	case XE_PMU_ACTUAL_FREQUENCY:
> +		fallthrough;
> +	case XE_PMU_REQUESTED_FREQUENCY:
> +		break;
>  	default:
>  		return -ENOENT;
>  	}
> @@ -194,6 +245,12 @@ store_sample(struct xe_pmu *pmu, unsigned int gt_id, int sample, u64 val)
>  	pmu->event_sample[gt_id][sample].cur = val;
>  }
>  
> +static void
> +add_sample_mult(struct xe_pmu *pmu, unsigned int gt_id, int sample, u32 val, u32 mul)
> +{
> +	pmu->event_sample[gt_id][sample].cur += mul_u32_u32(val, mul);
> +}
> +
>  static u64 get_rc6(struct xe_gt *gt)
>  {
>  	struct xe_device *xe = gt_to_xe(gt);
> @@ -239,6 +296,7 @@ static u64 __xe_pmu_event_read(struct perf_event *event)
>  {
>  	struct xe_device *xe =
>  		container_of(event->pmu, typeof(*xe), pmu.base);
> +	struct xe_pmu *pmu = &xe->pmu;
>  	const unsigned int gt_id = config_gt_id(event->attr.config);
>  	const u64 config = event->attr.config;
>  	struct xe_gt *gt = xe_device_get_gt(xe, gt_id);
> @@ -248,6 +306,18 @@ static u64 __xe_pmu_event_read(struct perf_event *event)
>  	case XE_PMU_RC6_RESIDENCY:
>  		val = get_rc6(gt);
>  		break;
> +	case XE_PMU_ACTUAL_FREQUENCY:
> +		val =
> +		   div_u64(read_sample(pmu, gt_id,
> +				       __XE_SAMPLE_FREQ_ACT),
> +			   USEC_PER_SEC /* to MHz */);
> +		break;
> +	case XE_PMU_REQUESTED_FREQUENCY:
> +		val =
> +		   div_u64(read_sample(pmu, gt_id,
> +				       __XE_SAMPLE_FREQ_REQ),
> +			   USEC_PER_SEC /* to MHz */);
> +		break;
>  	default:
>  		drm_warn(&gt->tile->xe->drm, "unknown pmu event\n");
>  	}
> @@ -277,6 +347,144 @@ static void xe_pmu_event_read(struct perf_event *event)
>  	local64_add(new - prev, &event->count);
>  }
>  
> +static u32 frequency_enabled_mask(void)
> +{
> +	unsigned int i;
> +	u32 mask = 0;
> +
> +	for (i = 0; i < XE_PMU_MAX_GT; i++)
> +		mask |= config_mask(__XE_PMU_ACTUAL_FREQUENCY(i)) |
> +		config_mask(__XE_PMU_REQUESTED_FREQUENCY(i));
> +
> +	return mask;
> +}
> +
> +static bool
> +frequency_sampling_enabled(struct xe_pmu *pmu, unsigned int gt)
> +{
> +	return pmu->enable &
> +	       (config_mask(__XE_PMU_ACTUAL_FREQUENCY(gt)) |
> +		config_mask(__XE_PMU_REQUESTED_FREQUENCY(gt)));
> +}
> +
> +static void
> +frequency_sample(struct xe_gt *gt, unsigned int period_ns)
> +{
> +	struct xe_device *xe = gt_to_xe(gt);
> +	const unsigned int gt_id = gt->info.id;
> +	struct xe_pmu *pmu = &xe->pmu;
> +	bool device_awake;
> +	int ret;
> +	u32 cur_freq;
> +
> +	if (!frequency_sampling_enabled(pmu, gt_id))
> +		return;
> +
> +	/* Report 0/0 (actual/requested) frequency while GT is suspended. */
> +	device_awake = xe_pm_runtime_get_if_active(xe);
> +	if (!device_awake)
> +		return;
> +
> +	if (pmu->enable & config_mask(__XE_PMU_ACTUAL_FREQUENCY(gt_id))) {
> +		u32 val;
> +
> +		/*
> +		 * We take a quick peek here without using forcewake
> +		 * so that we don't perturb the system under observation
> +		 * (forcewake => !rc6 => increased power use). We expect
> +		 * that if the read fails because it is outside of the
> +		 * mmio power well, then it will return 0 -- in which
> +		 * case we assume the system is running at the intended
> +		 * frequency. Fortunately, the read should rarely fail!
> +		 */
> +		val = xe_guc_pc_get_act_freq(&gt->uc.guc.pc);
> +
> +		add_sample_mult(pmu, gt_id, __XE_SAMPLE_FREQ_ACT,
> +				val, period_ns / 1000);
> +	}
> +
> +	if (pmu->enable & config_mask(__XE_PMU_REQUESTED_FREQUENCY(gt_id))) {
> +		ret = xe_guc_pc_get_cur_freq(&gt->uc.guc.pc, &cur_freq);
> +		if (!ret)
> +			add_sample_mult(pmu, gt_id, __XE_SAMPLE_FREQ_REQ,
> +					cur_freq,
> +					period_ns / 1000);
> +	}
> +
> +	xe_pm_runtime_put(xe);
> +}
> +
> +static enum hrtimer_restart xe_sample(struct hrtimer *hrtimer)
> +{
> +	struct xe_pmu *pmu = container_of(hrtimer, struct xe_pmu, timer);
> +	struct xe_device *xe = container_of(pmu, typeof(*xe), pmu);
> +	u64 period = max_t(u64, 10000, NSEC_PER_SEC / FREQUENCY);
> +	unsigned int period_ns;
> +	struct xe_gt *gt;
> +	unsigned int i;
> +	ktime_t now;
> +
> +	if (!READ_ONCE(pmu->timer_enabled))
> +		return HRTIMER_NORESTART;
> +
> +	now = ktime_get();
> +	period_ns = ktime_to_ns(ktime_sub(now, pmu->timer_last));
> +	pmu->timer_last = now;
> +
> +	/*
> +	 * Strictly speaking the passed in period may not be 100% accurate for
> +	 * all internal calculation, since some amount of time can be spent on
> +	 * grabbing the forcewake. However the potential error from timer call-
> +	 * back delay greatly dominates this so we keep it simple.
> +	 */
> +
> +	for_each_gt(gt, xe, i) {
> +		if (!(pmu->active_gts & BIT(i)))
> +			continue;
> +		frequency_sample(gt, period_ns);
> +	}
> +
> +	hrtimer_forward(hrtimer, now, ns_to_ktime(period));
> +
> +	return HRTIMER_RESTART;
> +}
> +
> +static bool pmu_needs_timer(struct xe_pmu *pmu)
> +{
> +	u32 enable;
> +
> +	/*
> +	 * Only some counters need the sampling timer.
> +	 *
> +	 * We start with a bitmask of all currently enabled events.
> +	 */
> +	enable = pmu->enable;
> +
> +	/*
> +	 * Mask out all the ones which do not need the timer, or in
> +	 * other words keep all the ones that could need the timer.
> +	 */
> +	enable &= frequency_enabled_mask();
> +
> +	/*
> +	 * If some bits remain it means we need the sampling timer running.
> +	 */
> +	return enable;
> +}
> +
> +static void __xe_pmu_maybe_start_timer(struct xe_pmu *pmu)
> +{
> +	u64 period = max_t(u64, 10000, NSEC_PER_SEC / FREQUENCY);
> +
> +	if (!pmu->timer_enabled && pmu_needs_timer(pmu)) {
> +		pmu->timer_enabled = true;
> +		pmu->timer_last = ktime_get();
> +		hrtimer_start_range_ns(&pmu->timer,
> +				       ns_to_ktime(period), 0,
> +				       HRTIMER_MODE_REL_PINNED);
> +	}
> +}
> +
>  static void xe_pmu_enable(struct perf_event *event)
>  {
>  	struct xe_pmu *pmu = event_to_pmu(event);
> @@ -299,6 +507,11 @@ static void xe_pmu_enable(struct perf_event *event)
>  	pmu->enable |= BIT(bit);
>  	pmu->enable_count[bit]++;
>  
> +	/*
> +	 * Start the sampling timer if needed and not already enabled.
> +	 */
> +	__xe_pmu_maybe_start_timer(pmu);
> +
>  	spin_unlock_irqrestore(&pmu->lock, flags);
>  update:
>  	/*
> @@ -328,8 +541,10 @@ static void xe_pmu_disable(struct perf_event *event)
>  	 * Decrement the reference count and clear the enabled
>  	 * bitmask when the last listener on an event goes away.
>  	 */
> -	if (--pmu->enable_count[bit] == 0)
> +	if (--pmu->enable_count[bit] == 0) {
>  		pmu->enable &= ~BIT(bit);
> +		pmu->timer_enabled &= pmu_needs_timer(pmu);
> +	}
>  
>  	spin_unlock_irqrestore(&pmu->lock, flags);
>  }
> @@ -463,6 +678,8 @@ create_event_attributes(struct xe_pmu *pmu)
>  		const char *unit;
>  	} events[] = {
>  		__event(0, "rc6-residency", "ms"),
> +		__event(1, "actual-frequency", "M"),
> +		__event(2, "requested-frequency", "M"),
>  	};
>  
>  	struct perf_pmu_events_attr *pmu_attr = NULL, *pmu_iter;
> @@ -675,6 +892,30 @@ void xe_pmu_suspend(struct xe_gt *gt)
>  	spin_unlock_irq(&pmu->lock);
>  }
>  
> +/**
> + * xe_pmu_resume() - Restart the timer if needed
> + */
> +void xe_pmu_resume(struct xe_gt *gt)
> +{
> +	struct xe_device *xe = gt_to_xe(gt);
> +	struct xe_pmu *pmu = &xe->pmu;
> +
> +	if (!pmu->base.event_init)
> +		return;
> +
> +	spin_lock_irq(&pmu->lock);
> +
> +	/*
> +	 * Re-enable sampling timer when GPU goes active.
> +	 */
> +	if (pmu->active_gts == 0)
> +		__xe_pmu_maybe_start_timer(pmu);
> +
> +	pmu->active_gts |= BIT(gt->info.id);
> +
> +	spin_unlock_irq(&pmu->lock);
> +}
> +
>  /**
>   * xe_pmu_unregister() - Remove/cleanup PMU registration
>   */
> @@ -687,6 +928,8 @@ void xe_pmu_unregister(void *arg)
>  
>  	pmu->registered = false;
>  
> +	hrtimer_cancel(&pmu->timer);
> +
>  	xe_pmu_unregister_cpuhp_state(pmu);
>  
>  	perf_pmu_unregister(&pmu->base);
> @@ -729,6 +972,8 @@ void xe_pmu_register(struct xe_pmu *pmu)
>  	int ret = -ENOMEM;
>  
>  	spin_lock_init(&pmu->lock);
> +	hrtimer_init(&pmu->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +	pmu->timer.function = xe_sample;
>  	pmu->cpuhp.cpu = -1;
>  
>  	pmu->name = kasprintf(GFP_KERNEL,
> diff --git a/drivers/gpu/drm/xe/xe_pmu.h b/drivers/gpu/drm/xe/xe_pmu.h
> index 17f5a8d7d45c..fb6e3819d7bc 100644
> --- a/drivers/gpu/drm/xe/xe_pmu.h
> +++ b/drivers/gpu/drm/xe/xe_pmu.h
> @@ -16,12 +16,14 @@ void xe_pmu_exit(void);
>  void xe_pmu_register(struct xe_pmu *pmu);
>  void xe_pmu_unregister(void *arg);
>  void xe_pmu_suspend(struct xe_gt *gt);
> +void xe_pmu_resume(struct xe_gt *gt);
>  #else
>  static inline int xe_pmu_init(void) { return 0; }
>  static inline void xe_pmu_exit(void) {}
>  static inline void xe_pmu_register(struct xe_pmu *pmu) {}
>  static inline void xe_pmu_unregister(void *arg) {}
>  static inline void xe_pmu_suspend(struct xe_gt *gt) {}
> +static inline void xe_pmu_resume(struct xe_gt *gt) {}
>  #endif
>  
>  #endif
> diff --git a/drivers/gpu/drm/xe/xe_pmu_types.h b/drivers/gpu/drm/xe/xe_pmu_types.h
> index 59d7718c59ce..c44c3d79b970 100644
> --- a/drivers/gpu/drm/xe/xe_pmu_types.h
> +++ b/drivers/gpu/drm/xe/xe_pmu_types.h
> @@ -12,6 +12,8 @@
>  enum {
>  	__XE_SAMPLE_RC6,
>  	__XE_SAMPLE_RC6_LAST_REPORTED,
> +	__XE_SAMPLE_FREQ_ACT,
> +	__XE_SAMPLE_FREQ_REQ,
>  	__XE_NUM_PMU_SAMPLERS
>  };
>  
> @@ -28,13 +30,19 @@ enum {
>  #define __XE_PMU_OTHER(x) ___XE_PMU_OTHER(0, x)
>  
>  #define XE_PMU_RC6_RESIDENCY                    __XE_PMU_OTHER(0)
> +#define XE_PMU_ACTUAL_FREQUENCY			__XE_PMU_OTHER(1)
> +#define XE_PMU_REQUESTED_FREQUENCY		__XE_PMU_OTHER(2)
>  #define __XE_PMU_RC6_RESIDENCY(gt)              ___XE_PMU_OTHER(gt, 0)
> +#define __XE_PMU_ACTUAL_FREQUENCY(gt)		___XE_PMU_OTHER(gt, 1)
> +#define __XE_PMU_REQUESTED_FREQUENCY(gt)	___XE_PMU_OTHER(gt, 2)
>  
>  /**
>   * Non-engine events that we need to track enabled-disabled transition and
>   * current state.
>   */
>  enum xe_pmu_tracked_events {
> +	__XE_PMU_ACTUAL_FREQUENCY_ENABLED,
> +	__XE_PMU_REQUESTED_FREQUENCY_ENABLED,
>  	__XE_PMU_RC6_RESIDENCY_ENABLED,
>  	__XE_PMU_TRACKED_EVENT_COUNT, /* count marker */
>  };
> @@ -128,6 +136,24 @@ struct xe_pmu {
>  	 * @sleep_last: Last time GT parked for RC6 estimation.
>  	 */
>  	ktime_t sleep_last[XE_PMU_MAX_GT];
> +	/**
> +	 * @timer: Timer for internal Xe PMU sampling.
> +	 */
> +	struct hrtimer timer;
> +	/**
> +	 * @timer_last:
> +	 *
> +	 * Timestmap of the previous timer invocation.
> +	 */
> +	ktime_t timer_last;
> +	/**
> +	 * @timer_enabled: Should the internal sampling timer be running.
> +	 */
> +	bool timer_enabled;
> +	/**
> +	 * @active_gts: GT active mask.
> +	 */
> +	unsigned int active_gts;
>  };
>  
>  #endif
> -- 
> 2.38.1
> 


More information about the Intel-xe mailing list