[CI] locking/ww_mutex: Adjust to lockdep nest_lock requirements
Thomas Hellström
thomas.hellstrom at linux.intel.com
Wed Oct 16 07:05:54 UTC 2024
When using mutex_acquire_nest() with a nest_lock, lockdep refcounts the
number of acquired lockdep_maps of mutexes of the same class, and also
keeps a pointer to the first acquired lockdep_map of a class. That pointer
is then used for various comparison-, printing- and checking purposes,
but there is no mechanism to actively ensure that lockdep_map stays in
memory. Instead, a warning is printed if the lockdep_map is freed and
there are still held locks of the same lock class, even if the lockdep_map
itself has been released.
In the context of WW/WD transactions that means that if a user unlocks
and frees a ww_mutex from within an ongoing ww transaction, and that
mutex happens to be the first ww_mutex grabbed in the transaction,
such a warning is printed and there might be a risk of a UAF.
Note that this is only problem when lockdep is enabled and affects only
dereferences of struct lockdep_map.
Adjust to this by adding a fake lockdep_map to the acquired context and
make sure it is the first acquired lockdep map of the associated
ww_mutex class. Then hold it for the duration of the WW/WD transaction.
This has the side effect that trying to lock a ww mutex *without* a
ww_acquire_context but where a such context has been acquire, we'd see
a lockdep splat. The test-ww_mutex.c selftest attempts to do that, so
modify that particular test to not acquire a ww_acquire_context if it
is not going to be used.
v2:
- Lower the number of locks in the test-ww_mutex
stress(STRESS_ALL) test to accommodate the dummy lock
introduced in this patch without overflowing lockdep held lock
references.
v3:
- Adjust the ww_test_normal locking-api selftest to avoid
recursive locking (Boqun Feng)
- Initialize the dummy lock map with LD_WAIT_SLEEP to agree with
how the corresponding ww_mutex lockmaps are initialized
(Boqun Feng)
Cc: Peter Zijlstra <peterz at infradead.org>
Cc: Ingo Molnar <mingo at redhat.com>
Cc: Will Deacon <will at kernel.org>
Cc: Waiman Long <longman at redhat.com>
Cc: Boqun Feng <boqun.feng at gmail.com>
Cc: Maarten Lankhorst <maarten at lankhorst.se>
Cc: Christian König <christian.koenig at amd.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Thomas Hellström <thomas.hellstrom at linux.intel.com>
Acked-by: maarten.lankhorst at linux.intel.com #v1
Tested-by: Boqun Feng <boqun.feng at gmail.com>
---
include/linux/ww_mutex.h | 14 ++++++++++++++
kernel/locking/test-ww_mutex.c | 8 +++++---
lib/locking-selftest.c | 4 ++--
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/include/linux/ww_mutex.h b/include/linux/ww_mutex.h
index bb763085479a..45ff6f7a872b 100644
--- a/include/linux/ww_mutex.h
+++ b/include/linux/ww_mutex.h
@@ -65,6 +65,16 @@ struct ww_acquire_ctx {
#endif
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
+ /**
+ * @first_lock_dep_map: fake lockdep_map for first locked ww_mutex.
+ *
+ * lockdep requires the lockdep_map for the first locked ww_mutex
+ * in a ww transaction to remain in memory until all ww_mutexes of
+ * the transaction have been unlocked. Ensure this by keeping a
+ * fake locked ww_mutex lockdep map between ww_acquire_init() and
+ * ww_acquire_fini().
+ */
+ struct lockdep_map first_lock_dep_map;
#endif
#ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH
unsigned int deadlock_inject_interval;
@@ -146,7 +156,10 @@ static inline void ww_acquire_init(struct ww_acquire_ctx *ctx,
debug_check_no_locks_freed((void *)ctx, sizeof(*ctx));
lockdep_init_map(&ctx->dep_map, ww_class->acquire_name,
&ww_class->acquire_key, 0);
+ lockdep_init_map_wait(&ctx->first_lock_dep_map, ww_class->mutex_name,
+ &ww_class->mutex_key, 0, LD_WAIT_SLEEP);
mutex_acquire(&ctx->dep_map, 0, 0, _RET_IP_);
+ mutex_acquire_nest(&ctx->first_lock_dep_map, 0, 0, &ctx->dep_map, _RET_IP_);
#endif
#ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH
ctx->deadlock_inject_interval = 1;
@@ -185,6 +198,7 @@ static inline void ww_acquire_done(struct ww_acquire_ctx *ctx)
static inline void ww_acquire_fini(struct ww_acquire_ctx *ctx)
{
#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ mutex_release(&ctx->first_lock_dep_map, _THIS_IP_);
mutex_release(&ctx->dep_map, _THIS_IP_);
#endif
#ifdef DEBUG_WW_MUTEXES
diff --git a/kernel/locking/test-ww_mutex.c b/kernel/locking/test-ww_mutex.c
index 10a5736a21c2..5d58b2c0ef98 100644
--- a/kernel/locking/test-ww_mutex.c
+++ b/kernel/locking/test-ww_mutex.c
@@ -62,7 +62,8 @@ static int __test_mutex(unsigned int flags)
int ret;
ww_mutex_init(&mtx.mutex, &ww_class);
- ww_acquire_init(&ctx, &ww_class);
+ if (flags & TEST_MTX_CTX)
+ ww_acquire_init(&ctx, &ww_class);
INIT_WORK_ONSTACK(&mtx.work, test_mutex_work);
init_completion(&mtx.ready);
@@ -90,7 +91,8 @@ static int __test_mutex(unsigned int flags)
ret = wait_for_completion_timeout(&mtx.done, TIMEOUT);
}
ww_mutex_unlock(&mtx.mutex);
- ww_acquire_fini(&ctx);
+ if (flags & TEST_MTX_CTX)
+ ww_acquire_fini(&ctx);
if (ret) {
pr_err("%s(flags=%x): mutual exclusion failure\n",
@@ -679,7 +681,7 @@ static int __init test_ww_mutex_init(void)
if (ret)
return ret;
- ret = stress(2047, hweight32(STRESS_ALL)*ncpus, STRESS_ALL);
+ ret = stress(2046, hweight32(STRESS_ALL)*ncpus, STRESS_ALL);
if (ret)
return ret;
diff --git a/lib/locking-selftest.c b/lib/locking-selftest.c
index 6f6a5fc85b42..6750321e3e9a 100644
--- a/lib/locking-selftest.c
+++ b/lib/locking-selftest.c
@@ -1720,8 +1720,6 @@ static void ww_test_normal(void)
{
int ret;
- WWAI(&t);
-
/*
* None of the ww_mutex codepaths should be taken in the 'normal'
* mutex calls. The easiest way to verify this is by using the
@@ -1770,6 +1768,8 @@ static void ww_test_normal(void)
ww_mutex_base_unlock(&o.base);
WARN_ON(o.ctx != (void *)~0UL);
+ WWAI(&t);
+
/* nest_lock */
o.ctx = (void *)~0UL;
ww_mutex_base_lock_nest_lock(&o.base, &t);
--
2.46.0
More information about the Intel-xe
mailing list