[PATCH 07/16] drm/i915/dp: Enable 3 DSC engines for 12 slices

[Ankit Nautiyal]

Certain resolutions require 12 DSC slices support along with ultrajoiner.
For such cases, the third DSC Engine per Pipe is enabled. Each DSC
Engine processes 1 Slice, resulting in a total of 12 VDSC slices
(4 Pipes * 3 DSC Instances per Pipe).
Add support for 12 DSC slices and 3 DSC engines for such modes.

v2: Add missing check for 3 slices support only with 4 joined pipes.
(Suraj)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 0607ea4ee321..53a437caacac 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -115,9 +115,12 @@ static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15};
  * For now consider a max of 2 slices per line, which works for all platforms.
  * With this we can have max of 4 DSC Slices per pipe.
  *
+ * For higher resolutions where 12 slice support is required with
+ * ultrajoiner, only then each pipe can support 3 slices.
+ *
  * #TODO Split this better to use 4 slices/dsc engine where supported.
  */
-static const u8 valid_dsc_slicecount[] = {1, 2, 4};
+static const u8 valid_dsc_slicecount[] = {1, 2, 3, 4};
 
 /**
  * intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH)
@@ -1025,6 +1028,13 @@ u8 intel_dp_dsc_get_slice_count(const struct intel_connector *connector,
 	for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
 		u8 test_slice_count = valid_dsc_slicecount[i] * num_joined_pipes;
 
+		/*
+		 * 3 DSC Slices per pipe need 3 DSC engines,
+		 * which is supported only with Ultrajoiner.
+		 */
+		if (valid_dsc_slicecount[i] == 3 && num_joined_pipes != 4)
+			continue;
+
 		if (test_slice_count >
 		    drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd, false))
 			break;
@@ -2410,8 +2420,13 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	 * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
 	 * is greater than the maximum Cdclock and if slice count is even
 	 * then we need to use 2 VDSC instances.
+	 * In case of Ultrajoiner along with 12 slices we need to use 3
+	 * VDSC instances.
 	 */
-	if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1)
+	if (pipe_config->joiner_pipes && num_joined_pipes == 4 &&
+	    pipe_config->dsc.slice_count == 12)
+		pipe_config->dsc.dsc_split = 3;
+	else if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1)
 		pipe_config->dsc.dsc_split = 2;
 
 	ret = intel_dp_dsc_compute_params(connector, pipe_config);
-- 
2.45.2