[PATCH 1/4] drm/i915/xe3lpd: Increase resolution for plane to support 6k

[Matt Roper]

On Thu, Oct 24, 2024 at 05:16:51PM +0530, Nautiyal, Ankit K wrote:
> 
> On 10/24/2024 9:25 AM, Suraj Kandpal wrote:
> > DISPLAY_VER >= 30 onwards CRTC can now support 6k resolution.
> > Increase pipe and plane max width and height to reflect this
> 
> Only max width is changed.
> 
> > increase in resolution.
> > 
> > --v2
> > -Take care of the subsampling scenario sooner rather than later [Matt]
> > 
> > Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
> > Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> > ---
> >   drivers/gpu/drm/i915/display/intel_display.c     |  5 ++++-
> >   .../gpu/drm/i915/display/skl_universal_plane.c   | 16 +++++++++++++++-
> >   2 files changed, 19 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index e1f6255e918b..37bac53f996e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -8432,7 +8432,10 @@ intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> >   	 * plane so let's not advertize modes that are
> >   	 * too big for that.
> >   	 */
> > -	if (DISPLAY_VER(dev_priv) >= 11) {
> > +	if (DISPLAY_VER(dev_priv) >= 30) {
> > +		plane_width_max = 6144 * num_joined_pipes;
> > +		plane_height_max = 4096;
> 
> plane_height_max is not changed, should be 4320.

Where do you see that documented?  At least on bspec 68858 it says

        Unjoined pipe source size, plane size, and pipe active size
        maximum vertical 4096.

and based on bspec 49199, that restriction goes back to at least gen12.
So it looks like we might have a bug on older platforms that needs to be
fixed.

When using the joiner the vertical limit goes up to 4320 (on Xe1
platforms) or 4800 (on Xe2/Xe3 platforms).


Matt

> 
> Otherwise looks good to me. With the above fixed:
> 
> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> 
> 
> > +	} else if (DISPLAY_VER(dev_priv) >= 11) {
> >   		plane_width_max = 5120 * num_joined_pipes;
> >   		plane_height_max = 4320;
> >   	} else {
> > diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > index 9207b7e96974..b3660c71e499 100644
> > --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > @@ -432,6 +432,16 @@ static int icl_plane_min_width(const struct drm_framebuffer *fb,
> >   	}
> >   }
> > +static int xe3_plane_max_width(const struct drm_framebuffer *fb,
> > +			       int color_plane,
> > +			       unsigned int rotation)
> > +{
> > +	if (intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier))
> > +		return 4096;
> > +	else
> > +		return 6144;
> > +}
> > +
> >   static int icl_hdr_plane_max_width(const struct drm_framebuffer *fb,
> >   				   int color_plane,
> >   				   unsigned int rotation)
> > @@ -2511,7 +2521,11 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv,
> >   	intel_fbc_add_plane(skl_plane_fbc(dev_priv, pipe, plane_id), plane);
> > -	if (DISPLAY_VER(dev_priv) >= 11) {
> > +	if (DISPLAY_VER(dev_priv) >= 30) {
> > +		plane->max_width = xe3_plane_max_width;
> > +		plane->max_height = icl_plane_max_height;
> > +		plane->min_cdclk = icl_plane_min_cdclk;
> > +	} else if (DISPLAY_VER(dev_priv) >= 11) {
> >   		plane->min_width = icl_plane_min_width;
> >   		if (icl_is_hdr_plane(dev_priv, plane_id))
> >   			plane->max_width = icl_hdr_plane_max_width;

-- 
Matt Roper
Graphics Software Engineer
Linux GPU Platform Enablement
Intel Corporation