[PATCH RFC 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
Imre Deak
imre.deak at intel.com
Thu Oct 31 21:05:50 UTC 2024
On Thu, Oct 31, 2024 at 05:12:45PM +0200, Abel Vesa wrote:
> According to the DisplayPort standard, LTTPRs have two operating
> modes:
> - non-transparent - it replies to DPCD LTTPR field specific AUX
> requests, while passes through all other AUX requests
> - transparent - it passes through all AUX requests.
>
> Switching between this two modes is done by the DPTX by issuing
> an AUX write to the DPCD PHY_REPEATER_MODE register.
>
> Add a generic helper that allows switching between these modes.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
> drivers/gpu/drm/display/drm_dp_helper.c | 17 +++++++++++++++++
> include/drm/display/drm_dp_helper.h | 1 +
> 2 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index 6ee51003de3ce616c3a52653c2f1979ad7658e21..38d612345986ad54b42228902ea718a089d169c4 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -2694,6 +2694,23 @@ int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE])
> }
> EXPORT_SYMBOL(drm_dp_lttpr_max_link_rate);
>
> +/**
> + * drm_dp_lttpr_set_transparent_mode - set the LTTPR in transparent mode
> + * @aux: DisplayPort AUX channel
> + * @enable: Enable or disable transparent mode
> + *
> + * Returns 0 on success or a negative error code on failure.
Should be "Returns 1 on success".
> + */
> +
> +int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable)
> +{
> + u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT :
> + DP_PHY_REPEATER_MODE_NON_TRANSPARENT;
> +
> + return drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE, val);
> +}
> +EXPORT_SYMBOL(drm_dp_lttpr_set_transparent_mode);
> +
> /**
> * drm_dp_lttpr_max_lane_count - get the maximum lane count supported by all LTTPRs
> * @caps: LTTPR common capabilities
> diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
> index 279624833ea9259809428162f4e845654359f8c9..8821ab2d36b0e04d38ccbdddcb703b34de7ed680 100644
> --- a/include/drm/display/drm_dp_helper.h
> +++ b/include/drm/display/drm_dp_helper.h
> @@ -625,6 +625,7 @@ int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux,
> u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
> int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]);
> int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
> +int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable);
> int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
> bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
> bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
>
> --
> 2.34.1
>
More information about the Intel-xe
mailing list