[PATCH v2 4/8] arm64: nvhe: add bee-headers support

[Masahiro Yamada]

On Fri, Sep 6, 2024 at 8:01 PM Daniel Gomez via B4 Relay
<devnull+da.gomez.samsung.com at kernel.org> wrote:
>
> From: Daniel Gomez <da.gomez at samsung.com>
>
> endian.h header is not provided by default in macOS. Use pkg-config with
> the new development package 'bee-headers' [1] to find the path where the
> headers are installed.
>
> [1] Bee Headers Project links:
> https://github.com/bee-headers/headers
> https://github.com/bee-headers/homebrew-bee-headers
>
> It requires to install bee-headers Homebrew Tap:
>
>   brew tap bee-headers/bee-headers
>   brew install bee-headers/bee-headers/bee-headers
>
> Signed-off-by: Daniel Gomez <da.gomez at samsung.com>
> ---
>  arch/arm64/kernel/pi/Makefile     | 1 +
>  arch/arm64/kernel/vdso32/Makefile | 1 +
>  arch/arm64/kvm/hyp/nvhe/Makefile  | 3 ++-
>  3 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
> index 4d11a8c29181..259c9a45fba0 100644
> --- a/arch/arm64/kernel/pi/Makefile
> +++ b/arch/arm64/kernel/pi/Makefile
> @@ -20,6 +20,7 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
>  KBUILD_CFLAGS  := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
>
>  hostprogs      := relacheck
> +HOSTCFLAGS_relacheck.o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  quiet_cmd_piobjcopy = $(quiet_cmd_objcopy)
>        cmd_piobjcopy = $(cmd_objcopy) && $(obj)/relacheck $(@) $(<)
> diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
> index 25a2cb6317f3..6cb8a04bd829 100644
> --- a/arch/arm64/kernel/vdso32/Makefile
> +++ b/arch/arm64/kernel/vdso32/Makefile
> @@ -107,6 +107,7 @@ VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
>  # $(hostprogs) with $(obj)
>  munge := ../../../arm/vdso/vdsomunge
>  hostprogs := $(munge)
> +HOSTCFLAGS_$(munge).o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  c-obj-vdso := note.o
>  c-obj-vdso-gettimeofday := vgettimeofday.o
> diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
> index b43426a493df..d20a440b6964 100644
> --- a/arch/arm64/kvm/hyp/nvhe/Makefile
> +++ b/arch/arm64/kvm/hyp/nvhe/Makefile
> @@ -15,7 +15,8 @@ ccflags-y += -fno-stack-protector     \
>              $(DISABLE_STACKLEAK_PLUGIN)
>
>  hostprogs := gen-hyprel
> -HOST_EXTRACFLAGS += -I$(objtree)/include
> +HOST_EXTRACFLAGS += -I$(objtree)/include \
> +       $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  lib-objs := clear_page.o copy_page.o memcpy.o memset.o
>  lib-objs := $(addprefix ../../../lib/, $(lib-objs))
>
> --
> 2.46.0
>
>

NACK.

Developers working on Linux distributions have no interest
in your homebrew setup.

For 99% of users, pkg-config does not do anything good.
It is a waste of process forks.



You need to do it outside.


 $ HOSTCFLAGS=$(pkg-config --cflags bee-headers) make

or

 $ export HOSTCFLAGS=$(pkg-config --cflags bee-headers)
 $ make





-- 
Best Regards
Masahiro Yamada