[PATCH v2 1/3] drm/xe: Move display reference timestamp readout to display/
Jani Nikula
jani.nikula at linux.intel.com
Thu Sep 19 10:00:02 UTC 2024
On Wed, 18 Sep 2024, Lucas De Marchi <lucas.demarchi at intel.com> wrote:
> On Tue, Sep 17, 2024 at 10:55:52AM GMT, Jani Nikula wrote:
>>On Fri, 13 Sep 2024, Matt Roper <matthew.d.roper at intel.com> wrote:
>>> It's quite unusual to read display registers as part of GT
>>> initialization, but use of the display reference timestamp is one
>>> approach to calculating the GT clock frequency on older platforms.
>>> Rename the function that does this readout and move it to display/ to
>>> make it more clear what's actually happening when this route is taken.
>>> Also add an assert that we've probed display before calling this
>>> function since we never expect this to be the route taken on platforms
>>> that lack display.
>>>
>>> In the future we may want to move to an intel_display implementation
>>> that can be shared with i915, but we'll leave that for later.
>>>
>>> Suggested-by: Lucas De Marchi <lucas.demarchi at intel.com>
>>> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
>>
>>Mixed feelings about this. On the one hand moving to display seems
>>appropriate, but adding any new stuff to xe_display.c means more stuff
>>to clean up for later.
>>
>>As you know, i915 does this as well in i915 core. The next logical step
>>is then to have this in i915/display, and share the code between i915
>>and xe. Adding another interface for i915/display.
>
> humn... but what would be the alternative? Move the i915 one to
> i915/display and then make both xe-core and i915-core use that?
> If we move it to display/ here then we can land this and finish the
> cleanup later.
The alternative would be to keep it outside of display/ in both drivers,
because display doesn't appear to need it. The annoying part in that is,
obviously, that display should take care of display stuff.
BR,
Jani.
>
> Lucas De Marchi
>
>>
>>Worth it? Display itself doesn't seem to have a use for this. I don't
>>know.
>>
>>
>>BR,
>>Jani.
>>
>>
>>
>>> ---
>>> drivers/gpu/drm/xe/display/xe_display.c | 18 ++++++++++++++++++
>>> drivers/gpu/drm/xe/display/xe_display.h | 4 ++++
>>> drivers/gpu/drm/xe/xe_gt_clock.c | 24 ++++++------------------
>>> 3 files changed, 28 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/xe/display/xe_display.c b/drivers/gpu/drm/xe/display/xe_display.c
>>> index a3131a67e5b1..ac6d08a5cc73 100644
>>> --- a/drivers/gpu/drm/xe/display/xe_display.c
>>> +++ b/drivers/gpu/drm/xe/display/xe_display.c
>>> @@ -29,6 +29,7 @@
>>> #include "intel_hdcp.h"
>>> #include "intel_hotplug.h"
>>> #include "intel_opregion.h"
>>> +#include "xe_mmio.h"
>>> #include "xe_module.h"
>>>
>>> /* Xe device functions */
>>> @@ -510,3 +511,20 @@ int xe_display_probe(struct xe_device *xe)
>>> unset_display_features(xe);
>>> return 0;
>>> }
>>> +
>>> +u32 xe_display_read_ref_ts_freq(struct xe_device *xe)
>>> +{
>>> + struct xe_mmio *mmio = xe_root_tile_mmio(xe);
>>> + u32 ts_override = xe_mmio_read32(mmio, TIMESTAMP_OVERRIDE);
>>> + u32 base_freq, frac_freq;
>>> +
>>> + base_freq = REG_FIELD_GET(TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK,
>>> + ts_override) + 1;
>>> + base_freq *= 1000000;
>>> +
>>> + frac_freq = REG_FIELD_GET(TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK,
>>> + ts_override);
>>> + frac_freq = 1000000 / (frac_freq + 1);
>>> +
>>> + return base_freq + frac_freq;
>>> +}
>>> diff --git a/drivers/gpu/drm/xe/display/xe_display.h b/drivers/gpu/drm/xe/display/xe_display.h
>>> index 17afa537aee5..40030cac7fe9 100644
>>> --- a/drivers/gpu/drm/xe/display/xe_display.h
>>> +++ b/drivers/gpu/drm/xe/display/xe_display.h
>>> @@ -43,6 +43,8 @@ void xe_display_pm_resume(struct xe_device *xe);
>>> void xe_display_pm_runtime_suspend(struct xe_device *xe);
>>> void xe_display_pm_runtime_resume(struct xe_device *xe);
>>>
>>> +u32 xe_display_read_ref_ts_freq(struct xe_device *xe);
>>> +
>>> #else
>>>
>>> static inline int xe_display_driver_probe_defer(struct pci_dev *pdev) { return 0; }
>>> @@ -76,5 +78,7 @@ static inline void xe_display_pm_resume(struct xe_device *xe) {}
>>> static inline void xe_display_pm_runtime_suspend(struct xe_device *xe) {}
>>> static inline void xe_display_pm_runtime_resume(struct xe_device *xe) {}
>>>
>>> +static u32 xe_display_read_ref_ts_freq(struct xe_device *xe) { return 0; }
>>> +
>>> #endif /* CONFIG_DRM_XE_DISPLAY */
>>> #endif /* _XE_DISPLAY_H_ */
>>> diff --git a/drivers/gpu/drm/xe/xe_gt_clock.c b/drivers/gpu/drm/xe/xe_gt_clock.c
>>> index cc2ae159298e..886c071c10f5 100644
>>> --- a/drivers/gpu/drm/xe/xe_gt_clock.c
>>> +++ b/drivers/gpu/drm/xe/xe_gt_clock.c
>>> @@ -7,6 +7,7 @@
>>>
>>> #include "xe_gt_clock.h"
>>>
>>> +#include "display/xe_display.h"
>>> #include "regs/xe_gt_regs.h"
>>> #include "regs/xe_regs.h"
>>> #include "xe_assert.h"
>>> @@ -15,22 +16,6 @@
>>> #include "xe_macros.h"
>>> #include "xe_mmio.h"
>>>
>>> -static u32 read_reference_ts_freq(struct xe_gt *gt)
>>> -{
>>> - u32 ts_override = xe_mmio_read32(>->mmio, TIMESTAMP_OVERRIDE);
>>> - u32 base_freq, frac_freq;
>>> -
>>> - base_freq = REG_FIELD_GET(TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK,
>>> - ts_override) + 1;
>>> - base_freq *= 1000000;
>>> -
>>> - frac_freq = REG_FIELD_GET(TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK,
>>> - ts_override);
>>> - frac_freq = 1000000 / (frac_freq + 1);
>>> -
>>> - return base_freq + frac_freq;
>>> -}
>>> -
>>> static u32 get_crystal_clock_freq(u32 rpm_config_reg)
>>> {
>>> const u32 f19_2_mhz = 19200000;
>>> @@ -57,14 +42,17 @@ static u32 get_crystal_clock_freq(u32 rpm_config_reg)
>>>
>>> int xe_gt_clock_init(struct xe_gt *gt)
>>> {
>>> + struct xe_device *xe = gt_to_xe(gt);
>>> u32 ctc_reg = xe_mmio_read32(>->mmio, CTC_MODE);
>>> u32 freq = 0;
>>>
>>> /* Assuming gen11+ so assert this assumption is correct */
>>> - xe_gt_assert(gt, GRAPHICS_VER(gt_to_xe(gt)) >= 11);
>>> + xe_gt_assert(gt, GRAPHICS_VER(xe) >= 11);
>>>
>>> if (ctc_reg & CTC_SOURCE_DIVIDE_LOGIC) {
>>> - freq = read_reference_ts_freq(gt);
>>> + xe_gt_assert(gt, xe->info.probe_display);
>>> +
>>> + freq = xe_display_read_ref_ts_freq(xe);
>>> } else {
>>> u32 c0 = xe_mmio_read32(>->mmio, RPM_CONFIG0);
>>
>>--
>>Jani Nikula, Intel
--
Jani Nikula, Intel
More information about the Intel-xe
mailing list