[PATCH 08/11] drm/i915: use GOSUB to program doubled buffered LUT registers

[Ville Syrjälä]

On Mon, Apr 07, 2025 at 07:53:56PM +0530, Chaitanya Kumar Borah wrote:
> With addition of double buffered GAMMA registers in PTL, we can now
> program them in the active region. Use GOSUB instruction of DSB to
> program them.
> 
> It is done in the following steps:
> 	1. intel_color_prepare_commit()
> 		- If the platform supports, prepare a dsb instance (dsb_color)
> 		  hooked to DSB0.
> 		- Add all the register write instructions to dsb_color through
> 		  the load_lut() hook
>                 - Do not add the vrr_send_push() logic to the buffer as it
> 		  should be taken care by dsb_commit instance of DSB0
>                 - Finish preparation of the buffer by aligning it to 64 bit
> 
> 	2. intel_atomic_dsb_finish()
> 		- Add the gosub instruction into the dsb_commit instance of DSB0
> 		  using intel_dsb_gosub()
> 		- If needed, add the vrr_send_push() logic to dsb_commit after it
> 
> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_color.c    | 13 ++++++++---
>  drivers/gpu/drm/i915/display/intel_display.c  | 22 ++++++++++++++++---
>  .../drm/i915/display/intel_display_device.h   |  1 +
>  3 files changed, 30 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
> index bb2da3a53e9c..49429404bd82 100644
> --- a/drivers/gpu/drm/i915/display/intel_color.c
> +++ b/drivers/gpu/drm/i915/display/intel_color.c
> @@ -1982,20 +1982,27 @@ void intel_color_prepare_commit(struct intel_atomic_state *state,
>  	if (!crtc_state->pre_csc_lut && !crtc_state->post_csc_lut)
>  		return;
>  
> -	crtc_state->dsb_color = intel_dsb_prepare(state, crtc, INTEL_DSB_1, 1024);
> +	if (HAS_DOUBLE_BUFFERED_LUT(display))
> +		crtc_state->dsb_color = intel_dsb_prepare(state, crtc, INTEL_DSB_0, 1024);
> +	else
> +		crtc_state->dsb_color = intel_dsb_prepare(state, crtc, INTEL_DSB_1, 1024);
> +
>  	if (!crtc_state->dsb_color)
>  		return;
>  
>  	display->funcs.color->load_luts(crtc_state);
>  
> -	if (crtc_state->use_dsb) {
> +	if (crtc_state->use_dsb && !HAS_DOUBLE_BUFFERED_LUT(display)) {
>  		intel_vrr_send_push(crtc_state->dsb_color, crtc_state);
>  		intel_dsb_wait_vblank_delay(state, crtc_state->dsb_color);
>  		intel_vrr_check_push_sent(crtc_state->dsb_color, crtc_state);
>  		intel_dsb_interrupt(crtc_state->dsb_color);
>  	}
>  
> -	intel_dsb_finish(crtc_state->dsb_color);
> +	if (HAS_DOUBLE_BUFFERED_LUT(display))
> +		intel_dsb_gosub_finish(crtc_state->dsb_color);
> +	else
> +		intel_dsb_finish(crtc_state->dsb_color);
>  }
>  
>  void intel_color_cleanup_commit(struct intel_crtc_state *crtc_state)
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 69c1790199d3..85e28b4c9e66 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7239,9 +7239,25 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state,
>  		}
>  	}
>  
> -	if (new_crtc_state->dsb_color)
> -		intel_dsb_chain(state, new_crtc_state->dsb_commit,
> -				new_crtc_state->dsb_color, true);
> +	if (new_crtc_state->dsb_color) {
> +		if (HAS_DOUBLE_BUFFERED_LUT(display)) {
> +			intel_dsb_gosub(new_crtc_state->dsb_commit,
> +					new_crtc_state->dsb_color);
> +
> +			if (new_crtc_state->use_dsb) {
> +				intel_dsb_wait_vblanks(new_crtc_state->dsb_commit, 1);
> +
> +				intel_vrr_send_push(new_crtc_state->dsb_commit, new_crtc_state);
> +				intel_dsb_wait_vblank_delay(state, new_crtc_state->dsb_commit);
> +				intel_vrr_check_push_sent(new_crtc_state->dsb_commit,
> +							  new_crtc_state);
> +				intel_dsb_interrupt(new_crtc_state->dsb_commit);
> +			}
> +		} else {
> +			intel_dsb_chain(state, new_crtc_state->dsb_commit,
> +					new_crtc_state->dsb_color, true);
> +		}
> +	}

The logic around the commit completion is getting very messy (it already
was pretty bad though).

maybe something like this:

bool intel_color_use_chained_dsb()
{
	return dsb_color && !HAS_DOUBLE_BUFFERED_LUT;
}

if (use_dsb) {
	do pipe/plane programming
}

if (use_chained_dsb())
	dsb_chain();
else if (dsb_color)
	dsb_gosub();

if (use_dsb && !use_chained_dsb() {
	do commit completion
}

>  
>  	intel_dsb_finish(new_crtc_state->dsb_commit);
>  }
> diff --git a/drivers/gpu/drm/i915/display/intel_display_device.h b/drivers/gpu/drm/i915/display/intel_display_device.h
> index 368b0d3417c2..14943b47824b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_device.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_device.h
> @@ -157,6 +157,7 @@ struct intel_display_platforms {
>  #define HAS_DMC(__display)		(DISPLAY_RUNTIME_INFO(__display)->has_dmc)
>  #define HAS_DMC_WAKELOCK(__display)	(DISPLAY_VER(__display) >= 20)
>  #define HAS_DOUBLE_BUFFERED_M_N(__display)	(DISPLAY_VER(__display) >= 9 || (__display)->platform.broadwell)
> +#define HAS_DOUBLE_BUFFERED_LUT(__display)	(DISPLAY_VER(__display) >= 30)
>  #define HAS_DOUBLE_WIDE(__display)	(DISPLAY_VER(__display) < 4)
>  #define HAS_DP20(__display)		((__display)->platform.dg2 || DISPLAY_VER(__display) >= 14)
>  #define HAS_DPT(__display)		(DISPLAY_VER(__display) >= 13)
> -- 
> 2.25.1

-- 
Ville Syrjälä
Intel