[PATCH 2/3] drm/i915/reg: Remove some extra blank lines

[Jani Nikula]

Remove some blank lines from i915_reg.h primarily to help the scripted
refactoring coming up, keeping the comments together.

Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index da658c3591f0..6e80508b544c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1016,7 +1016,6 @@
 /*
  * Overlay regs
  */
-
 #define OVADD			_MMIO(0x30000)
 #define DOVSTA			_MMIO(0x30008)
 #define OC_BUF			(0x3 << 20)
@@ -1071,7 +1070,6 @@
 /*
  * Display engine regs
  */
-
 /* Pipe/transcoder A timing regs */
 #define _TRANS_HTOTAL_A		0x60000
 #define _TRANS_HTOTAL_B		0x61000
@@ -2781,7 +2779,6 @@
  * functionality covered in PCH_PORT_HOTPLUG is split into
  * SHOTPLUG_CTL_DDI and SHOTPLUG_CTL_TC.
  */
-
 #define SHOTPLUG_CTL_DDI				_MMIO(0xc4030)
 #define   SHOTPLUG_CTL_DDI_HPD_ENABLE(hpd_pin)			(0x8 << (_HPD_PIN_DDI(hpd_pin) * 4))
 #define   SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(hpd_pin)		(0x4 << (_HPD_PIN_DDI(hpd_pin) * 4))
@@ -2861,7 +2858,6 @@
 #define  TRANS_DPLL_ENABLE(pipe)	(1 << ((pipe) * 4 + 3))
 
 /* transcoder */
-
 #define _PCH_TRANS_HTOTAL_A		0xe0000
 #define _PCH_TRANS_HTOTAL_B		0xe1000
 #define PCH_TRANS_HTOTAL(pipe)		_MMIO_PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B)
@@ -3787,7 +3783,6 @@ enum skl_power_gate {
 /*
  * SKL Clocks
  */
-
 /* CDCLK_CTL */
 #define CDCLK_CTL			_MMIO(0x46000)
 #define  CDCLK_FREQ_SEL_MASK		REG_GENMASK(27, 26)
-- 
2.39.5