[PATCH 07/19] drm/i915/vrr: Prepare for fixed refresh rate timings

Nautiyal, Ankit K ankit.k.nautiyal at intel.com
Wed Feb 19 12:40:35 UTC 2025


On 2/17/2025 11:42 PM, Ville Syrjälä wrote:
> On Fri, Feb 14, 2025 at 05:41:17PM +0530, Ankit Nautiyal wrote:
>> Currently we always compute the timings as if vrr is enabled.
>> With this approach the state checker becomes complicated when we
>> introduce fixed refresh rate mode with vrr timing generator.
>>
>> To avoid the complications, instead of always computing vrr timings, we
>> compute vrr timings based on uapi.vrr_enable knob.
>> So when the knob is disabled we always compute vmin=flipline=vmax.
>>
>> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
>> ---
>>   drivers/gpu/drm/i915/display/intel_vrr.c | 54 ++++++++++++++++++++++++
>>   1 file changed, 54 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
>> index 3bcf2a026ad3..a4ed102a2119 100644
>> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
>> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
>> @@ -263,6 +263,35 @@ int intel_vrr_fixed_rr_vtotal(const struct intel_crtc_state *crtc_state)
>>   			intel_vrr_real_vblank_delay(crtc_state);
>>   }
>>   
>> +static
>> +int intel_vrr_fixed_rr_vmax(const struct intel_crtc_state *crtc_state)
>> +{
>> +	return intel_vrr_fixed_rr_vtotal(crtc_state);
>> +}
>> +
>> +static
>> +int intel_vrr_fixed_rr_vmin(const struct intel_crtc_state *crtc_state)
>> +{
>> +	struct intel_display *display = to_intel_display(crtc_state);
>> +
>> +	return intel_vrr_fixed_rr_vtotal(crtc_state) -
>> +		intel_vrr_flipline_offset(display);
>> +}
>> +
>> +static
>> +int intel_vrr_fixed_rr_flipline(const struct intel_crtc_state *crtc_state)
>> +{
>> +	return intel_vrr_fixed_rr_vtotal(crtc_state);
>> +}
>> +
>> +static
>> +void intel_vrr_prepare_fixed_timings(struct intel_crtc_state *crtc_state)
>> +{
>> +	crtc_state->vrr.vmax = intel_vrr_fixed_rr_vmax(crtc_state);
>> +	crtc_state->vrr.vmin = intel_vrr_fixed_rr_vmin(crtc_state);
>> +	crtc_state->vrr.flipline = intel_vrr_fixed_rr_flipline(crtc_state);
> Same comment as to the previous patch: vblank delay is not a thing
> at this point, so this needs to just use the actual timings without
> any adjustments.

Will just make:

         crtc_state->vrr.vmax = intel_vrr_vmin_flipline(crtc_state);
         crtc_state->vrr.flipline = intel_vrr_vmin_flipline(crtc_state);


Regards,

Ankit

>
> The rest of the patch looks fine.
>
>> +}
>> +
>>   static
>>   int intel_vrr_compute_vmin(struct intel_crtc_state *crtc_state)
>>   {
>> @@ -343,6 +372,8 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
>>   		intel_vrr_compute_vrr_timings(crtc_state);
>>   	else if (is_cmrr_frac_required(crtc_state) && is_edp)
>>   		intel_vrr_compute_cmrr_timings(crtc_state);
>> +	else
>> +		intel_vrr_prepare_fixed_timings(crtc_state);
>>   
>>   	if (HAS_AS_SDP(display)) {
>>   		crtc_state->vrr.vsync_start =
>> @@ -514,6 +545,13 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
>>   	if (!crtc_state->vrr.enable)
>>   		return;
>>   
>> +	intel_de_write(display, TRANS_VRR_VMIN(display, cpu_transcoder),
>> +		       crtc_state->vrr.vmin - 1);
>> +	intel_de_write(display, TRANS_VRR_VMAX(display, cpu_transcoder),
>> +		       crtc_state->vrr.vmax - 1);
>> +	intel_de_write(display, TRANS_VRR_FLIPLINE(display, cpu_transcoder),
>> +		       crtc_state->vrr.flipline - 1);
>> +
>>   	intel_de_write(display, TRANS_PUSH(display, cpu_transcoder),
>>   		       TRANS_PUSH_EN);
>>   
>> @@ -527,6 +565,20 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
>>   	}
>>   }
>>   
>> +static
>> +void intel_vrr_set_fixed_rr_timings(const struct intel_crtc_state *crtc_state)
>> +{
>> +	struct intel_display *display = to_intel_display(crtc_state);
>> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>> +
>> +	intel_de_write(display, TRANS_VRR_VMIN(display, cpu_transcoder),
>> +		       intel_vrr_fixed_rr_vmin(crtc_state) - 1);
>> +	intel_de_write(display, TRANS_VRR_VMAX(display, cpu_transcoder),
>> +		       intel_vrr_fixed_rr_vmax(crtc_state) - 1);
>> +	intel_de_write(display, TRANS_VRR_FLIPLINE(display, cpu_transcoder),
>> +		       intel_vrr_fixed_rr_flipline(crtc_state) - 1);
>> +}
>> +
>>   void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
>>   {
>>   	struct intel_display *display = to_intel_display(old_crtc_state);
>> @@ -541,6 +593,8 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
>>   				TRANS_VRR_STATUS(display, cpu_transcoder),
>>   				VRR_STATUS_VRR_EN_LIVE, 1000);
>>   	intel_de_write(display, TRANS_PUSH(display, cpu_transcoder), 0);
>> +
>> +	intel_vrr_set_fixed_rr_timings(old_crtc_state);
>>   }
>>   
>>   static
>> -- 
>> 2.45.2


More information about the Intel-xe mailing list